2016 Ozone Summit V3 Snow Kite Complete with Bar and Lines

The 2016 Ozone Summit V3 Snow Kite retains its place in the snowkite lineup as the ultimate performance kite. The 2016 Ozone Summit V3 Snow Kites high-aspect design will get you riding faster and jumping higher and longer than ever. Quick turning speeds make mountain ascents easy. Snowkiters addicted to speed, backcountry exploration, and lofty jumps will look to the 2016 Ozone Summit V3 Snow Kite as their go-to kite.

Read more about what Ozone has to say about the 2016 Ozone Summit V3 Snow Kite 

The 2016 Ozone Summit V3 Snow Kite is an all out performance snowkite for dedicated and experienced snowkite riders. The 2016 Ozone Summit V3 Snow Kite defines top snowkite performance and has become the most versatile performance kite on the market. It is the same kite design as the 2015 model, with refinement to the Internal Re-Ride Release System. The 2016 Ozone Summit V3 Snow Kite is for riders with experience and who are looking for a kite to explore the limits of what is possible. The high aspect design, clean sail, de-power range and handling will allow the adventurous to push the boundaries of the sport even further.

The 2016 Ozone Summit V3 Snow Kite has so much potential due to its amazing power generation in light winds but also big de-power in strong winds. Combine that with fast direct handling and you have the ultimate combination for progressive riders. The design of this 2016 Ozone Summit V3 Snow Kite has been maximized to deliver as much performance as possible for backcountry exploring. Each aspect has been calculated using the latest development techniques to produce a kite that pushes the limit of design. With our new software and our years of experience we have put together a unique combination of aspect ratio, cell width, profile and sail tension. We have incorporated technology from our class leading paraglider designs to dramatically improve stability.

2016 Ozone Summit V3 Tech Specs:

• For dedicated and experienced Snowkiters.
• High As pect performance profile with optimized Arc to improve speed and glide.
• Tight powerful turns for mountain climbing.
• Industry Leading Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
• Internal strapping to increase stability.
• Enhanced bridle line configuration, less lines reduces the parasitic drag.
• Unique blow-out-valves on the under surface help prevent damaging the kite if crashed.
• Velcro openings in the tip to remove debris and snow.
• Double pulley speed-system with high spec Ronstan Orbit ball bearing pulleys.
• Velcro openings in the tip to remove debris and snow.
• Heavy duty, technical mountain backpack with clip-to harness connection. Has enough volume to fit 2 kites and day supplies.
• Exceptional hand checked Ozone factory construction using the highest quality materials.
• Contact Snow Control System with 500kg front/300kg back lines, and Brake Stall handle to land and re-launch the kite with ease.

2016 Ozone Summit V3 Colors (Please Specify Color when Ordering)

The second green should be Red/White

2016 Ozone Summit V3 Wind

The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

2017 Ozone Access V7 Snowkite

Read more on what Ozone says about the 2017 Ozone Access V7 Snowkite

The seventh version has been further refined and re-modeled for improvements in both ease of use and flying characteristics. The design goal of the 2017 Ozone Access V7 Snowkite was to improve all aspects of the kite to allow new comers to easily enjoy the sport from their very first session. This is made possible by creating an incredibly stable kite, which has constant pull, a large wind range and predictable handling. The 2017 Ozone Access V7 Snowkite has flatter arc than it's predecessors giving it a wider wind range, this means more power and more depower. The rib spacing has been optimized to clean up the surfaces toward the tip, which sees gains in both performance and handling. New tab positions offer a rock solid feel in the air and maintain quick turning speed with a more responsive bar feeling.

The 2017 Ozone Access V7 Snowkites low aspect ratio ensures stability in the gustiest of conditions, delivering constant power and progressive pull. Blow-out-valves on the under surface help avoid damage if the kite is crashed. Even though the 2017 Ozone Access V7 Snowkite is developed for teaching and entry level riders it has become a favorite for experienced riders who require ultra stability in turbulent high mountain conditions. The 2017 Ozone Access V7 Snowkiteis also a favorite for expeditions where it is essential to have safe and easy to use kites in extreme conditions.

2017 Ozone Access V7 Snowkite Features

• Entry level de-power foil.
• Stable, predictable, unsurpassed ease of use.
• The kite of choice for new comers and snowkite schools.
• Revolutionary Internal Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
• Designed with OZ-CAD - The FUTURE is NOW. All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
• Exceptional Ozone Fa ctory construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
• Internal Re-Ride Release System - The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
• Double pulley Speed System - Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
• High quality Oz Tex 40D - We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
• Sheathed bridle lines - High quality, low stretch sheathed bridle lines for maximum strength and performance
• Blow out valves - Under surface Blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
• Dirt-out wing tips - The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
• Fool proof line connectors - Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.
• Comparable feeling throughout the size range - We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

2017 Ozone Access V7 Snowkite Colors

Please Specify Color when Ordering

2017 Ozone Access V7 Snowkite Bar

2017 Ozone Access V7 Snowkite Wind Range

The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

2017 Ozone Edge V9 Kite Complete with Ozone Contact Water Control System

Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

2017 Ozone Edge V9 Kite Highlights

2017 Ozone Edge V9 Kite Features

The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

2017 Ozone Edge V9 Kite Colors

Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

Please Specify Color when Ordering

2017 Ozone Edge V9 Kite Range of Use

2017 Ozone Edge V9 Kite Wind Range & Bar Size

2017 Ozone Edge V9 Kite Sizes

6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

2017 Ozone Edge V9 Kite

Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

2017 Ozone Edge V9 Kite Highlights

2017 Ozone Edge V9 Kite Features

The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

2017 Ozone Edge V9 Kite Colors

Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

Please Specify Color when Ordering

2017 Ozone Edge V9 Kite Range of Use

2017 Ozone Edge V9 Kite Wind Range & Bar Size

2017 Ozone Edge V9 Kite Sizes

6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

2017 Ozone Edge V9 Kite Complete with Ozone Race Control System

Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

2017 Ozone Edge V9 Kite Highlights

2017 Ozone Edge V9 Kite Features

The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

2017 Ozone Edge V9 Kite Colors

Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

Please Specify Color when Ordering

2017 Ozone Edge V9 Kite Range of Use

2017 Ozone Edge V9 Kite Wind Range & Bar Size

2017 Ozone Edge V9 Kite Sizes

6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

2017 Ozone Frenzy V10 Snow Kite Complete with Bar and Lines

Utilizing the latest state-of-the-art paragliding technology, the 2017 Ozone Frenzy V10 Snow Kite has amazing speed and power, making it the most versatile snowkite ready to tackle freeride, jumps, freestyle, or back-country riding. Stiffeners in the leading edge improve airflow over the wing for increased stability.  The 2017 Ozone Frenzy V10 Snow Kite was a best-seller last winter and is sure to be popular again this year.

Read more about what Ozone has to say about the 2017 Ozone Frenzy V10 Snow Kite

The 2017 Ozone Frenzy V10 Snow Kite is our do-it-all powerhouse de-power foil kite. This radical snowkite design combines the latest in foil kite and paraglide technology. The 2017 Ozone Frenzy V10 Snow Kite is an amazing all round de-powerable foil covering many aspects of Snowkiting from freeride to freestyle. It is the same kite design as the 2015 model, with refinement to the Internal Re-Ride Release System.

Smooth and progressive depower with a tight and powerful turn makes freestyle fun with great pop for jumps and constant pull when unhooked. The 2017 Ozone Frenzy V10 Snow Kites enhanced stability also makes difficult backcountry rides and mountain climbing passages more accessible and enjoyable. The leading edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow; this increases stability and overall performance. Our new reflex profile offers ultimate stability in gusty winds and backcountry conditions. Optimized strap positions distribute load more evenly throughout the sail. Incorporating open cells allows for easier inflation and deflation when packing.

2017 Ozone Frenzy V10 Snow Kite Tech Specs:

• Do-it-all powerhouse de-powerable foil.
• Latest foil kite and paraglider design technology.
• Freestyle, freeride, and backcountry machine.
• Industry Leading Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
• Reflex profile enhances stability when depowered.
• Optimized strap positions distribute load more evenly throughout the sail.
• Open cells allow for easier inflation and deflation when packing.
• Light weight plastic battens in leading edge for extra stability and cleaner leading edge.
• Velcro openings in the tip to remove debris and snow.
• Double pulley speed-system with high spec Ronstan Orbit ball bearing pulleys.
• Velcro openings in the tip to remove debris and snow.
• Heavy duty, technical mountain backpack with clip-to harness connection. Has enough volume to fit 2 kites and day supplies.
• Exceptional hand checked Ozone factory construction using the highest quality materials.
• Contact Snow Control System with 500kg front/300kg back lines, and Brake Stall handle to land and re-launch the kite with ease.

2017 Ozone Frenzy V10 Snow Kite Colors (Please Specify Color when Ordering)

2017 Ozone Frenzy V10 Snow Kite Wind

The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

2017 Ozone Summit V4 Snowkite

Read more on what Ozone says about the 2017 Ozone Summit V4 Snowkite

The 2017 Ozone Summit V4 Snowkite continues to define high performance and versatility for dedicated Snowkite riders who are looking for high speed mountain climbing or blasting through the powder with a fast turning kite. The fourth version has directly benefited from our R1 V2 race development knowledge, allowing us to improve performance, handling and stability. The 2017 Ozone Summit V4 Snowkite is perfect for progressive riders – it will allow the adventurous to push the boundaries of the snowy backcountry. The 2017 Ozone Summit V4 Snowkite has so much potential due to its amazing power generation in light winds but also big de-power in strong winds. Combine that with fast direct handling and you have the ultimate open-cell foil Snowkite.

Each aspect of the 2017 Ozone Summit V4 Snowkite has been calculated using the latest development techniques to produce a kite that pushes the limit of design. With our new software and our years of experience we have put together a unique combination of aspect ratio, cell width, profile and sail tension. The 2017 Ozone Summit V4 Snowkite now boasts the same internal load distribution technology as the R1 V2. The new diagonal ribs and internal straps connect to each other creating a structural frame, which reduces load going into the upper and lower surfaces. This new technology brings further gains in stability and handling to the 2017 Ozone Summit V4 Snowkite. The airfoil section has also been recalculated and smoothed to improve the kites speed and feeling. New flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening - the battens enhance structure of the openings, this means quicker and easier inflation.

2017 Ozone Summit V4 Snowkite Features

• For dedicated and experienced snowkiters.
• High aspect and high performance profile.
• Tight powerful turns for mountain climbing.
• Revolutionary Internal Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
• Designed with OZ-CAD - The FUTURE is NOW. All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
• Exceptional Ozone Factory construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
• Internal Re-Ride Release System - The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
• Double pulley Speed System - Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
• Leading Edge Opening Battens - Flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening. The battens enhance structure of the openings, this means quicker and easier inflation.
• Internal Diagonals and Straps - Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance that helps control the kites top and bottom surfaces to maintain the designed shape and profile without being distorted from indirect tension or loads.
• High quality Oz Tex 40D - We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
• Sheathed bridle lines - High quality, low stretch sheathed bridle lines for maximum strength and performance
• Blow out valves - Under surface Blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
• Dirt-out wing tips - The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
• Fool proof line connectors - Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.
• Comparable feeling throughout the size range - We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

2017 Ozone Summit V4 Snowkite Bar

2017 Ozone Summit V4 Snowkite Colors

Please Specify Color when Ordering

2017 Ozone Summit V4 Snowkite Wind Range

The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

Ozone Chrono Kiteboarding Kite

The Ozone Chrono Kiteboarding Kite is crafted from a HighPerformance light weight canopy material containing Leading Edge profile plastic batten reinforcements, and Mesh Protection inflation valves for fast inflation and no deflation. The Ozone Chrono Kiteboarding Kites exceptional hand checked Ozone factory construction using the highest quality materials and contains Internal Reinforcements and Strapping for improved durability and load distribution. Ozone Chrono Kiteboarding Kites aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance. Ozone Chrono Kiteboarding Kites contain High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics. Making Ozone Chrono Kiteboarding Kites ready for whatever the day has to offer.

Ozone Chrono Kiteboarding Kite Tech Specs

• Performance Double Surface – The Chrono V2 lightweight double surface design is combined with a mid-high aspect ratio and 46 cells. The high number of cells means the ribs are positioned closer together, creating ultra smooth surfaces with reduced drag and maintaining a clean profile, resulting in superior flight efficiency.
• Mid-High Aspect Ratio and New Planform – The aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance.
• Optimized Leading Edge Air Intakes – Newly designed intake valves are precisely positioned along the LE on the upper and lower surfaces. This leads to a stability increase and a more solid kite. The inflation is now easier and safer as the kite rapidly inflates from the center to the wingtips.
• Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
• Internal Straps – Internal span-wise straps distribute load across the sail evenly and effectively, while also maintaining a cohesive internal balance controlling the high aspect ratio.
• Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification that we use on our Snowkite range. The lines are thicker and stiffer compared to the R1’s high performance Kevlar line, and the sheath makes them less prone to damage.
• Velcro and Water Out Channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean and dry your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
• High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics.

Ozone Chrono Kiteboarding Kite Construction Features

• Exceptional hand checked Ozone factory construction using the highest quality materials
• High performance light weight canopy material
• Leading Edge profile plastic batten reinforcements
• Internal reinforcements and strapping improve durability and load distribution
• Mesh protected inflation valves for fast inflation and no deflation
• Double pulley speed-system, utilizing the latest high spec low friction Ronstan Orbit pulleys
• Color coded and numbered fool proof line connectors
• Velcro openings on last tip cell for easy wash out of debris and water
• Water proof deflation zipper on top center cell for easy and fast deflation

Ozone Chrono Kiteboarding Kite Colors

 Please Secify Color when Ordering (Green-Blue-Red)

Ozone Chrono Kiteboarding Kite Wind

Ozone Chrono Kiteboarding Kite Bar Options

Ozone Chrono Kiteboarding Kite Information

Our design goal with the second version was to take the original Chrono’s high performance characteristics and make it easier to use for riders looking for all around ability in any conditions on any surface. The Chrono V2 is more stable and easier to inflate; additionally this model has thicker sheathed Dyneema bridle lines to reduce tangles on the ground. New sizes cover a wider range of conditions to personalize your high performance quiver. The Chrono V2 is for experienced riders with good kite control skills or previous foil kite experience. It is not difficult to fly, but there are specific techniques required to ground handle and fly high aspect ratio foil kites safely. Experienced riders will find themselves at home with the Chrono V2. On the water with a Twin-tip the Chrono V2 large sizes are light wind monsters - loads of power, easy to jump and stable. Due to the abundance of power and efficiency, gaining upwind ground is ridiculously easy. In light winds it is impressive how high and floaty jumps can be! When the wind picks up and you are looking for serious height the smaller sizes really shine, no question at all, these are pop and go big machines, just edge hard and send it, too easy!

Riding with a Foil or Race board the benefits are immediately noticeable thanks to the longer lifting period a foil kite gives you during that critical tacking moment compared to an LEI. The combined performance of the kite and these types of boards makes 4 knot riding a true reality. On the snow the Chrono V2 takes the sport to another level, more power and performance in light winds, extended jump and flight time with a much better glide angle. The improved handling makes it possible to ride in lighter winds just by generating apparent speed, which means you can take a smaller size. On the land the gains we have made in kite stability mean that you can work on your landboard freestyle moves without worrying about the kite collapsing or falling out of the sky. For buggy riders the improvements mean freestyle or racing maneuvers are easy and more intuitive with smoother coordinated handling. The Chrono V2 is a closed-cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! Using the re-launch webbing handle that connects the rear flying lines it is possible to reverse the kite off the water and continue riding. We recommend you practice this technique. An internal drainage channel running through to both wing tips allows any water that may have entered the kite to drain out. The Chrono V2 is not a wave kite and should not be used in waves. The Chrono V2 features a simple yet effective front line flag out release. After releasing the flag out always check the speed system, bridle lines and flying lines for twists before restart. The Chrono V2 will require maintenance just like any high performance equipment in racing sports, for example replacing tyres or piston rings on motorbikes. The Speed System and Bridle Lines must be checked after every 60 hours flying time, if they are worn or are not to factory specifications (+ or - 15mm) they must be replaced or the kite will not perform as designed.

Ozone Chrono Kiteboarding Kite

The Ozone Chrono Kiteboarding Kite is crafted from a HighPerformance light weight canopy material containing Leading Edge profile plastic batten reinforcements, and Mesh Protection inflation valves for fast inflation and no deflation. The Ozone Chrono Kiteboarding Kites exceptional hand checked Ozone factory construction using the highest quality materials and contains Internal Reinforcements and Strapping for improved durability and load distribution. Ozone Chrono Kiteboarding Kites aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance. Ozone Chrono Kiteboarding Kites contain High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics. Making Ozone Chrono Kiteboarding Kites ready for whatever the day has to offer.

Ozone Chrono Kiteboarding Kite Tech Specs

• Performance Double Surface – The Chrono V2 lightweight double surface design is combined with a mid-high aspect ratio and 46 cells. The high number of cells means the ribs are positioned closer together, creating ultra smooth surfaces with reduced drag and maintaining a clean profile, resulting in superior flight efficiency.
• Mid-High Aspect Ratio and New Planform – The aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance.
• Optimized Leading Edge Air Intakes – Newly designed intake valves are precisely positioned along the LE on the upper and lower surfaces. This leads to a stability increase and a more solid kite. The inflation is now easier and safer as the kite rapidly inflates from the center to the wingtips.
• Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
• Internal Straps – Internal span-wise straps distribute load across the sail evenly and effectively, while also maintaining a cohesive internal balance controlling the high aspect ratio.
• Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification that we use on our Snowkite range. The lines are thicker and stiffer compared to the R1’s high performance Kevlar line, and the sheath makes them less prone to damage.
• Velcro and Water Out Channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean and dry your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
• High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics.

Ozone Chrono Kiteboarding Kite Construction Features

• Exceptional hand checked Ozone factory construction using the highest quality materials
• High performance light weight canopy material
• Leading Edge profile plastic batten reinforcements
• Internal reinforcements and strapping improve durability and load distribution
• Mesh protected inflation valves for fast inflation and no deflation
• Double pulley speed-system, utilizing the latest high spec low friction Ronstan Orbit pulleys
• Color coded and numbered fool proof line connectors
• Velcro openings on last tip cell for easy wash out of debris and water
• Water proof deflation zipper on top center cell for easy and fast deflation

Ozone Chrono Kiteboarding Kite Colors

 Please Secify Color when Ordering (Green-Blue-Red)

Ozone Chrono Kiteboarding Kite Wind

Ozone Chrono Kiteboarding Kite Bar Options

Ozone Chrono Kiteboarding Kite Information

Our design goal with the second version was to take the original Chrono’s high performance characteristics and make it easier to use for riders looking for all around ability in any conditions on any surface. The Chrono V2 is more stable and easier to inflate; additionally this model has thicker sheathed Dyneema bridle lines to reduce tangles on the ground. New sizes cover a wider range of conditions to personalize your high performance quiver. The Chrono V2 is for experienced riders with good kite control skills or previous foil kite experience. It is not difficult to fly, but there are specific techniques required to ground handle and fly high aspect ratio foil kites safely. Experienced riders will find themselves at home with the Chrono V2. On the water with a Twin-tip the Chrono V2 large sizes are light wind monsters - loads of power, easy to jump and stable. Due to the abundance of power and efficiency, gaining upwind ground is ridiculously easy. In light winds it is impressive how high and floaty jumps can be! When the wind picks up and you are looking for serious height the smaller sizes really shine, no question at all, these are pop and go big machines, just edge hard and send it, too easy!

Riding with a Foil or Race board the benefits are immediately noticeable thanks to the longer lifting period a foil kite gives you during that critical tacking moment compared to an LEI. The combined performance of the kite and these types of boards makes 4 knot riding a true reality. On the snow the Chrono V2 takes the sport to another level, more power and performance in light winds, extended jump and flight time with a much better glide angle. The improved handling makes it possible to ride in lighter winds just by generating apparent speed, which means you can take a smaller size. On the land the gains we have made in kite stability mean that you can work on your landboard freestyle moves without worrying about the kite collapsing or falling out of the sky. For buggy riders the improvements mean freestyle or racing maneuvers are easy and more intuitive with smoother coordinated handling. The Chrono V2 is a closed-cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! Using the re-launch webbing handle that connects the rear flying lines it is possible to reverse the kite off the water and continue riding. We recommend you practice this technique. An internal drainage channel running through to both wing tips allows any water that may have entered the kite to drain out. The Chrono V2 is not a wave kite and should not be used in waves. The Chrono V2 features a simple yet effective front line flag out release. After releasing the flag out always check the speed system, bridle lines and flying lines for twists before restart. The Chrono V2 will require maintenance just like any high performance equipment in racing sports, for example replacing tyres or piston rings on motorbikes. The Speed System and Bridle Lines must be checked after every 60 hours flying time, if they are worn or are not to factory specifications (+ or - 15mm) they must be replaced or the kite will not perform as designed.

Ozone Connect Pro Harness 

Read more on what Ozone has to say about the Ozone Connect Pro Harness w/Spreader Bar 

The Ozone Connect Pro Harness is designed for comfort, support and flexibility in use, this harness is perfect to wear over or under your snow gear. Featuring high quality Aluminium adjustment buckles on the spreader bar and leg straps. The Ozone Connect Pro Harness has been designed like a rock climbing harness so that it will not ride up.

• Waist harness with removable leg straps is ideal for all snow and land kiters
• Strong yet lightweight construction
• Stainless Steel spreader bar with comfortable spreader pad
• Ergonomic shaping and enhanced load distribution
• Fully adjustable so one size fits all

Ozone Connect Pro Harness Features

Spreader bar - The Stainless Steel spreader bar attaches directly to both the harness and the leg straps reducing spreader bar upward tilt. Extra padding and neoprene covered for comfort.
Aluminium buckles - High quality extra strong aluminium adjustment buckles are easy to open and close. This makes fitting on the harness very easy even under snow gear. Smooth adjustment reduces wear on webbing.
Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.
Removable leg support straps - Color coded, thin and light yet comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding. They can be easily removed or fitted under your snow pants without having to take them off.
Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.
Technical backpack connection - Female buckles on each side connect directly with Frenzy and Summit technical backpacks. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.
Kite leash attachment - Easy to access front kite leash attachment.
Webbing loop attachments - Attach a grab handle or ropes for pulling sledges to the webbing loops on each side of the harness.
One size fits all - Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.

Developed without compromise using proven Chrono technology, the R1 produces breath-taking speed and performance. The ultra clean leading edge, smooth surfaces and number of cells give an insight into its capabilities. But it's what you can't see that makes this race focused kite so special, the feeling on the bar and the responsiveness of this high aspect wing is unique. Our newly calculated sail tension brings a level of stability that surpasses every high performance kite we have ever produced by far. Combined with new diagonal ribs, a high aspect ratio planform, reduced cell width and a new high performance profile the boundaries of performance have been re-defined again.

The R1 is truly a race pedigree performance kite that will inspire confidence to the rider while delivering outstanding racing performance on the water, land or snow. The R1 is for advanced riders only who have previous foil kite experience. It is not difficult to fly but there are techniques required to fly a high aspect ratio foil kite. The R1 will require maintenance just like any high performance equipment in racing sports, for example replacing tires or piston rings on motorbikes, the R1's Speed System and Bridle Lines must be replaced after every 60 hours flying time.

The R1 is a closed cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. The R1 features a simple yet effective front line flag out release. After releasing the flag out you should check the speed system, bridle lines and your flying lines for twists before restart. The R1 is not a wave kite and should not be used in waves.

2015 Ozone R1 Design and Performance Features

• High cell count – The high number of cells in the R1 reduces ballooning between the cells holding the wing shape and surfaces smoother and cleaner. This creates a reduction in turbulent airflow, giving the R1 more speed and increased depower.
• Optimized leading edge air intakes – Precisely positioned intake valves along the LE lead to a stability increase and a more solid kite downwind. The inflation is also now easier and safer as the kite rapidly inflates.
• LE profile reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
• Internal diagonals and straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load into and across the sail evenly and effectively. Together the diagonals and straps lower sail tension and increase the structural balance that helps control this high aspect ratio kite.
• High performance bridle lines – Using high performance thin Kevlar bridle line, the R1 flies faster, and so accelerates faster giving it higher performance, more range and more depower due to less drag.
• High performance materials – High-tenacity sail cloth with extremely low porosity values and an overall lightweight enable us to further stabilise the canopy and maximise fast flight characteristics.
• Velcro + water out channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.

2015 Ozone R1 Wind Range

2015 Ozone R1 Colors