The new 2015 HQ Matrixx II is the next logical step after the first Matrixx and sets a new standard in terms of versatility.

Design and Performance

For the new Matrixx II, our design took an in-depth look and took on the latest knowledge of paragliding designs. With almost the same AR, we were able to increase the performance of the kite in every aspect. This is not only due to the new kite design, but also the performance has improved due to the new super light 20D fabric.
The new Matrixx II feels more direct, faster and offers more performance than ever before, the lift, hang time and turning speed are at a higher level. The size split of the Matrixx II is unique. The smaller sizes are well optimized for the mid wind range. The 15 and 18m are especially trimmed for light winds. Due to the usage of a lighter rib material than on the other sizes the weight on the 18m was reduced to only 3.5kg incl. the bar. This makes the 18m to be one of the best light windkites on the market.

Choice of material

The new Matrixx II has a well-chosen mix of different high-spec materials. Every size of the Matrixx II is equipped with our super light 20D ripstop materials. This material saves around 35% of weight in regards to the previous version.
For the bridle, we have chosen a super thin spliced Dyneema line, this will help to reduce the drag produced by the kite and help it to fly faster. We have also chosen material which has been proven for many years within the kiting industry highly effective for the mixer and flying lines. The precision of the manufacturing of the kite is extremely high, only using high standards like this we have been able to build a kite to a high specification and standard of performance.

Who is the Matrixx II intended for?

The Matrixx II is the perfect kite for all who like to experience the maximum of lift and hang time. This kite turns and flies fast with super light materials. This perfect combination lets you be one of the first on the water. It has never been easier to handle a closed cell foil! Yet with the new design generated this has a higher standard of stability, making it perfect to increase the personal riding level for any rider without paying too much attention to the kite. The Matrixx II combines characteristics of different disciplines without their difficulty in handling, so no more tip tucking, big turning radius or difficult launching. It is simply a more enjoyable way of kiting, you just unpack the kite and enjoy every second of your ride. Every size is perfectly adjusted for its wind range. If you want to do long and high jumps, go upwind without thinking about it and experience high end performance, the Matrixx II is the kite of your choice.

2015 HQ Matrixx 2 Specs

2015 HQ Matrixx 2 Range of Use

2016 Noble RC 2000 Snowkiting Kiteboard

The 2016 Noble RC 2000 Snowkiting Kiteboard comes with an 80m side-cut, APS Technology, and a tip to tail wood core. The 2016 Noble RC 2000 Snowkiting Kiteboard designed for the highest level racing, it's patented APS technology provides extraordinary grip, both on the toe and heel-side edge, even on icy and hard-pack conditions, and allows you to hold more speed, especially when going upwind. The The 2016 Noble RC 2000 Snowkiting Kiteboard is tested in the wildest areas of Utah (USA), Siberia (Russia) and Norway. The 2016 Noble RC 2000 Snowkiting Kiteboard is designed for riders who are not afraid of speed and have the desire to win every race. Yes, the 2016 Noble RC 2000 Snowkiting Kiteboard is the world’s best race snowkite board – the winner of the ISPO 2014 Award. The 2016 Noble RC 2000 Snowkiting Kiteboard is the ultimate racing machine designed and developed solely to conquer this unique discipline.

2016 Noble RC 2000 Snowkiting Kiteboard Features

* APS CORE TECHNOLOGY
* WOODCORE
* POWER PLATES
* GLOSSY LACQUER
* APS Core Technology
* ABS SANDWICH CONSTRUCTION
* SINTERED PREMIUM BASE

2016 Noble RC 2000 Snowkiting Kiteboard Sizes

200

2016 Ozone Summit V3 Snow Kite Complete with Bar and Lines

The 2016 Ozone Summit V3 Snow Kite retains its place in the snowkite lineup as the ultimate performance kite. The 2016 Ozone Summit V3 Snow Kites high-aspect design will get you riding faster and jumping higher and longer than ever. Quick turning speeds make mountain ascents easy. Snowkiters addicted to speed, backcountry exploration, and lofty jumps will look to the 2016 Ozone Summit V3 Snow Kite as their go-to kite.

Read more about what Ozone has to say about the 2016 Ozone Summit V3 Snow Kite 

The 2016 Ozone Summit V3 Snow Kite is an all out performance snowkite for dedicated and experienced snowkite riders. The 2016 Ozone Summit V3 Snow Kite defines top snowkite performance and has become the most versatile performance kite on the market. It is the same kite design as the 2015 model, with refinement to the Internal Re-Ride Release System. The 2016 Ozone Summit V3 Snow Kite is for riders with experience and who are looking for a kite to explore the limits of what is possible. The high aspect design, clean sail, de-power range and handling will allow the adventurous to push the boundaries of the sport even further.

The 2016 Ozone Summit V3 Snow Kite has so much potential due to its amazing power generation in light winds but also big de-power in strong winds. Combine that with fast direct handling and you have the ultimate combination for progressive riders. The design of this 2016 Ozone Summit V3 Snow Kite has been maximized to deliver as much performance as possible for backcountry exploring. Each aspect has been calculated using the latest development techniques to produce a kite that pushes the limit of design. With our new software and our years of experience we have put together a unique combination of aspect ratio, cell width, profile and sail tension. We have incorporated technology from our class leading paraglider designs to dramatically improve stability.

2016 Ozone Summit V3 Tech Specs:

• For dedicated and experienced Snowkiters.
• High As pect performance profile with optimized Arc to improve speed and glide.
• Tight powerful turns for mountain climbing.
• Industry Leading Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
• Internal strapping to increase stability.
• Enhanced bridle line configuration, less lines reduces the parasitic drag.
• Unique blow-out-valves on the under surface help prevent damaging the kite if crashed.
• Velcro openings in the tip to remove debris and snow.
• Double pulley speed-system with high spec Ronstan Orbit ball bearing pulleys.
• Velcro openings in the tip to remove debris and snow.
• Heavy duty, technical mountain backpack with clip-to harness connection. Has enough volume to fit 2 kites and day supplies.
• Exceptional hand checked Ozone factory construction using the highest quality materials.
• Contact Snow Control System with 500kg front/300kg back lines, and Brake Stall handle to land and re-launch the kite with ease.

2016 Ozone Summit V3 Colors (Please Specify Color when Ordering)

The second green should be Red/White

2016 Ozone Summit V3 Wind

The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

2017 Flysurfer Peak 3

Read more about what Flysurfer says about the 2017 Flysurfer Peak 3

Go vertical! The 2017 Flysurfer Peak 3 features everything a passionate freerider’s heart could possibly desire – a highly-efficient and durable Single-Skin concept, simple set up, and easy to fly. Plus the 2017 Flysurfer Peak 3 offers power on demand with superb safety. The 2017 Flysurfer Peak 3 is designed for universal use, it sets the standard for a touring kite. Adventure awaits you!

The 2017 Flysurfer Peak 3 tackles all terrain with ease, and does not compromise on performance, agility or safety, whilst remaining simple to use. Experience the light handling and cranking power of a Single-Skin kite. With the 2017 Flysurfer Peak 3 you will access the world of kiting in just a few seconds! Since no pre-inflation or pumping is needed, you are always ready to go. Its unmatched low-end power will take you wherever you want to go, even in the slightest breeze; and thanks to its effective depower, you’ll be safe and in control, even in stronger winds. The 2017 Flysurfer Peak 3 ensures maximum security, reinforced by the new Reef Line Safety.

Reverse launches, backstall landings, or simply dropping the kite at the edge of the wind window, the 2017 Flysurfer Peak 3 does it all, giving you multiple ways out of dangerous situations, or for times when you just need a break. The 2017 Flysurfer Peak 3 is ideally suited for backcountry touring, freeride snowkiting, street kiting, kite landboarding or buggying, and is a must-have in every kite school. Once you try it, it will quickly become your go-to kite. Choose your preferred size from the new 2017 Flysurfer Peak 3 line-up – 12.0m, 9.0m, 6.0m or 4.0m. The 2017 Flysurfer Peak 3 is the ultimate toy whether on snow, sand, grass or asphalt. Adventure awaits you…

2017 Flysurfer Peak 3 Design Features

Single-Skin Concept - The 2017 Flysurfer Peak 3 is a foil kite which only needs one top sail to form the wing. This Single-Skin concept draws in kiters with its unique characteristics and ratio of performance per square meter. The high efficiency remains controllable thanks to the 2017 Flysurfer Peak 3’s progressive depower and stability. The kite benefits from the wing’s lack of inertia, has far less tendency to overshoot and its reduced weight means it behaves well in gusty wind. When it comes to kiting in the low-end wind range, the 2017 Flysurfer Peak 3 definitely sets the standard.

Universal Application - The 2017 Flysurfer Peak 3 is as easy to fly as an entry-level school kite but designed for high-adrenaline adventures. Whether it’s on land or snow, with a kite landboard or a buggy, skis or snowboards, for freeride or teaching purposes, adults or children, beginners or advanced, for urban street kiting or as a traveling companion; the 2017 Flysurfer Peak 3 is your ultimate weapon for your daily session.

Unmatched Low End - Can you fly a kite with nearly no wind? You can with the 2017 Flysurfer Peak 3! The kite provides incredible stability and control in the lightest winds. With a 30% reduction of the bridle lines, the 2017 Flysurfer Peak 3 produces less drag, letting it achieve its unique low-end. You can even have fun in 3 – 8 knot winds!

Reef Line Safety - The unique, patented Reef Line Safety of the 2017 Flysurfer Peak 3 ensures maximum security and all but guarantees the easy reactivation of the kite. The advantage of the Reef Line, compared to a single frontline safety system, is an immediate contraction of the kite’s wing span. This results in a controlled, powerless crash of the kite. In light winds it may occur that some lines fold over a wingtip. The Reef Line Safety is an additional red-colored line included in every 2017 Flysurfer Peak 3 package. Please follow the assembly instructions carefully.

Minimal Pack Size - The 2017 Flysurfer Peak 3 is built for traveling, trekking and touring. Its Single-Skin concept meets the requirements for snowkiting and landkiting better than any other kite. Take advantage of its featherlight weight and super-small pack sizes. The 2017 Flysurfer Peak 3 provides highest safety in the most dangerous situations, supported by the Reef Line Safety and an immediate loss of power, if needed, at any time.

High Quality & Durable - The 2017 Flysurfer Peak 3’s durability remains true to the FLYSURFER Kiteboarding philosophy. We build extensively-tested products with functional and rugged components. New reinforcements are targeted at specific high-stress areas such as at the leading edge. We are proud to further improve our product quality.

2017 Flysurfer Peak 3 Colors

2017 Flysurfer Peak 3 Technical Data

2017 Flysurfer Peak 3 Wind Range

2017 HQ Matrix III Kite

Read more about what HQ says about the 2017 HQ Matrix III Kite

The 2017 HQ Matrix III Kite is a versatile all-terrain kite. Several new details in the design give the Matrixx III a performance boost without losing its easy handling. The new 2017 HQ Matrix III Kite flies more direct and gives a better feedback and feeling on the bar. Releasing the enormous lift will catapult riders to new heights. The 2017 HQ Matrix III Kite has been optimized for use on foil boards. The result is a stable, yet fast flying wing with reduced drag and an increased upwind ability. The easier a kite is to handle, the faster rider progression occurs. This all is what the new 2017 HQ Matrix III Kite is able to offer on any kind of traction sport on any terrain. 

2017 HQ Matrix III Kite Characteristics

2017 HQ Matrix III Kite Performance

The 2017 HQ Matrix III Kite offers a significant performance boost over its predecessor. The 2017 HQ Matrix III Kite starts to pull a lot earlier and the new construction and higher AR give greater feedback to the pilot. Riders get significantly more power on demand and the increased lift is easier to unleash. Hang time continues to be a hallmark of the 2017 HQ Matrix III Kite. 

2017 HQ Matrix III Kite Shape

2017 HQ Matrix III Kite features a redesigned shape with a higher AR, more cells and newly positioned air-intakes for an increased level of performance.
The new 2017 HQ Matrix III Kite air-intakes support faster inflation and higher inner pressure of the kite that helps to stiffen and stabilize the shape.  

2017 HQ Matrix III Kite Bridal

The bridle setup of the 2017 HQ Matrix III Kite is a mix of high quality Dyneema lines. The 2017 HQ Matrix III Kite main bridle is made out of strong, super thin, low elongation Dyneema to reduce drag in the air to a minimum. The 2017 HQ Matrix III Kites mixer is built with long lasting Ronstan pulleys and pre-stretched Dyneema lines that are maintenance free. Even after hours of flying, there is no need to replace or adjust bridle lines. 

2017 HQ Matrix III Kite Material

For the 2017 HQ Matrix III Kite we only choose high end sail cloth. The combination of fabrics used creates a perfect balance. The larger sizes are light wind optimized and built with our super light and extreme durable 20D fabric. The 18m² 2017 HQ Matrix III Kite including bar and lines weights just 3.5 kg. To withstand the more explosive power delivery on the smaller sizes, these sails are produced with our well proofed 30D fabric.

2017 HQ Matrix III Kite Colors/Size

2017 HQ Matrix III Kite Useability

2017 HQ Matrix III Kite Technical Data

2017 Ozone Access V7 Snowkite

Read more on what Ozone says about the 2017 Ozone Access V7 Snowkite

The seventh version has been further refined and re-modeled for improvements in both ease of use and flying characteristics. The design goal of the 2017 Ozone Access V7 Snowkite was to improve all aspects of the kite to allow new comers to easily enjoy the sport from their very first session. This is made possible by creating an incredibly stable kite, which has constant pull, a large wind range and predictable handling. The 2017 Ozone Access V7 Snowkite has flatter arc than it's predecessors giving it a wider wind range, this means more power and more depower. The rib spacing has been optimized to clean up the surfaces toward the tip, which sees gains in both performance and handling. New tab positions offer a rock solid feel in the air and maintain quick turning speed with a more responsive bar feeling.

The 2017 Ozone Access V7 Snowkites low aspect ratio ensures stability in the gustiest of conditions, delivering constant power and progressive pull. Blow-out-valves on the under surface help avoid damage if the kite is crashed. Even though the 2017 Ozone Access V7 Snowkite is developed for teaching and entry level riders it has become a favorite for experienced riders who require ultra stability in turbulent high mountain conditions. The 2017 Ozone Access V7 Snowkiteis also a favorite for expeditions where it is essential to have safe and easy to use kites in extreme conditions.

2017 Ozone Access V7 Snowkite Features

• Entry level de-power foil.
• Stable, predictable, unsurpassed ease of use.
• The kite of choice for new comers and snowkite schools.
• Revolutionary Internal Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
• Designed with OZ-CAD - The FUTURE is NOW. All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
• Exceptional Ozone Fa ctory construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
• Internal Re-Ride Release System - The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
• Double pulley Speed System - Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
• High quality Oz Tex 40D - We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
• Sheathed bridle lines - High quality, low stretch sheathed bridle lines for maximum strength and performance
• Blow out valves - Under surface Blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
• Dirt-out wing tips - The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
• Fool proof line connectors - Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.
• Comparable feeling throughout the size range - We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

2017 Ozone Access V7 Snowkite Colors

Please Specify Color when Ordering

2017 Ozone Access V7 Snowkite Bar

2017 Ozone Access V7 Snowkite Wind Range

The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

2017 Ozone Edge V9 Kite Complete with Ozone Contact Water Control System

Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

2017 Ozone Edge V9 Kite Highlights

2017 Ozone Edge V9 Kite Features

The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

2017 Ozone Edge V9 Kite Colors

Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

Please Specify Color when Ordering

2017 Ozone Edge V9 Kite Range of Use

2017 Ozone Edge V9 Kite Wind Range & Bar Size

2017 Ozone Edge V9 Kite Sizes

6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

2017 Ozone Edge V9 Kite

Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

2017 Ozone Edge V9 Kite Highlights

2017 Ozone Edge V9 Kite Features

The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

2017 Ozone Edge V9 Kite Colors

Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

Please Specify Color when Ordering

2017 Ozone Edge V9 Kite Range of Use

2017 Ozone Edge V9 Kite Wind Range & Bar Size

2017 Ozone Edge V9 Kite Sizes

6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

2017 Ozone Edge V9 Kite Complete with Ozone Race Control System

Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

2017 Ozone Edge V9 Kite Highlights

2017 Ozone Edge V9 Kite Features

The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

2017 Ozone Edge V9 Kite Colors

Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

Please Specify Color when Ordering

2017 Ozone Edge V9 Kite Range of Use

2017 Ozone Edge V9 Kite Wind Range & Bar Size

2017 Ozone Edge V9 Kite Sizes

6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

2017 Ozone Frenzy V10 Snow Kite Complete with Bar and Lines

Utilizing the latest state-of-the-art paragliding technology, the 2017 Ozone Frenzy V10 Snow Kite has amazing speed and power, making it the most versatile snowkite ready to tackle freeride, jumps, freestyle, or back-country riding. Stiffeners in the leading edge improve airflow over the wing for increased stability.  The 2017 Ozone Frenzy V10 Snow Kite was a best-seller last winter and is sure to be popular again this year.

Read more about what Ozone has to say about the 2017 Ozone Frenzy V10 Snow Kite

The 2017 Ozone Frenzy V10 Snow Kite is our do-it-all powerhouse de-power foil kite. This radical snowkite design combines the latest in foil kite and paraglide technology. The 2017 Ozone Frenzy V10 Snow Kite is an amazing all round de-powerable foil covering many aspects of Snowkiting from freeride to freestyle. It is the same kite design as the 2015 model, with refinement to the Internal Re-Ride Release System.

Smooth and progressive depower with a tight and powerful turn makes freestyle fun with great pop for jumps and constant pull when unhooked. The 2017 Ozone Frenzy V10 Snow Kites enhanced stability also makes difficult backcountry rides and mountain climbing passages more accessible and enjoyable. The leading edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow; this increases stability and overall performance. Our new reflex profile offers ultimate stability in gusty winds and backcountry conditions. Optimized strap positions distribute load more evenly throughout the sail. Incorporating open cells allows for easier inflation and deflation when packing.

2017 Ozone Frenzy V10 Snow Kite Tech Specs:

• Do-it-all powerhouse de-powerable foil.
• Latest foil kite and paraglider design technology.
• Freestyle, freeride, and backcountry machine.
• Industry Leading Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
• Reflex profile enhances stability when depowered.
• Optimized strap positions distribute load more evenly throughout the sail.
• Open cells allow for easier inflation and deflation when packing.
• Light weight plastic battens in leading edge for extra stability and cleaner leading edge.
• Velcro openings in the tip to remove debris and snow.
• Double pulley speed-system with high spec Ronstan Orbit ball bearing pulleys.
• Velcro openings in the tip to remove debris and snow.
• Heavy duty, technical mountain backpack with clip-to harness connection. Has enough volume to fit 2 kites and day supplies.
• Exceptional hand checked Ozone factory construction using the highest quality materials.
• Contact Snow Control System with 500kg front/300kg back lines, and Brake Stall handle to land and re-launch the kite with ease.

2017 Ozone Frenzy V10 Snow Kite Colors (Please Specify Color when Ordering)

2017 Ozone Frenzy V10 Snow Kite Wind

The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

2017 Ozone Summit V4 Snowkite

Read more on what Ozone says about the 2017 Ozone Summit V4 Snowkite

The 2017 Ozone Summit V4 Snowkite continues to define high performance and versatility for dedicated Snowkite riders who are looking for high speed mountain climbing or blasting through the powder with a fast turning kite. The fourth version has directly benefited from our R1 V2 race development knowledge, allowing us to improve performance, handling and stability. The 2017 Ozone Summit V4 Snowkite is perfect for progressive riders – it will allow the adventurous to push the boundaries of the snowy backcountry. The 2017 Ozone Summit V4 Snowkite has so much potential due to its amazing power generation in light winds but also big de-power in strong winds. Combine that with fast direct handling and you have the ultimate open-cell foil Snowkite.

Each aspect of the 2017 Ozone Summit V4 Snowkite has been calculated using the latest development techniques to produce a kite that pushes the limit of design. With our new software and our years of experience we have put together a unique combination of aspect ratio, cell width, profile and sail tension. The 2017 Ozone Summit V4 Snowkite now boasts the same internal load distribution technology as the R1 V2. The new diagonal ribs and internal straps connect to each other creating a structural frame, which reduces load going into the upper and lower surfaces. This new technology brings further gains in stability and handling to the 2017 Ozone Summit V4 Snowkite. The airfoil section has also been recalculated and smoothed to improve the kites speed and feeling. New flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening - the battens enhance structure of the openings, this means quicker and easier inflation.

2017 Ozone Summit V4 Snowkite Features

• For dedicated and experienced snowkiters.
• High aspect and high performance profile.
• Tight powerful turns for mountain climbing.
• Revolutionary Internal Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
• Designed with OZ-CAD - The FUTURE is NOW. All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
• Exceptional Ozone Factory construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
• Internal Re-Ride Release System - The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
• Double pulley Speed System - Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
• Leading Edge Opening Battens - Flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening. The battens enhance structure of the openings, this means quicker and easier inflation.
• Internal Diagonals and Straps - Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance that helps control the kites top and bottom surfaces to maintain the designed shape and profile without being distorted from indirect tension or loads.
• High quality Oz Tex 40D - We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
• Sheathed bridle lines - High quality, low stretch sheathed bridle lines for maximum strength and performance
• Blow out valves - Under surface Blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
• Dirt-out wing tips - The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
• Fool proof line connectors - Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.
• Comparable feeling throughout the size range - We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

2017 Ozone Summit V4 Snowkite Bar

2017 Ozone Summit V4 Snowkite Colors

Please Specify Color when Ordering

2017 Ozone Summit V4 Snowkite Wind Range

The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

Flysurfer Infinity 3.0 Airstyle Bar

Read more about what Flysurfer says about the Flysurfer Infinity 3.0 Airstyle Bar

Best grip, robust security, high-quality lines, endless rotations and multiple possibilites for individual adjustments. The Flysurfer Infinity 3.0 Airstyle Bar is the control option from Flysurfer for everyone – from beginners to pros. The Flysurfer Infinity 3.0 Airstyle Bar is streamlined, simple, and at the same time impressive in terms of functionality. Anyone who likes big air or who occasionally kites in overpowered conditions should get their hands on the INFINITY 3.0 Airstyle BAR.

The Flysurfer Infinity 3.0 Airstyle Bar delivers pure enjoyment in every jump. With the best grip, reliable safety function, high quality lines, endless rotations and several ways to customize the Bar setup; it fully satisfies the needs of Freeriders, Airstylers and fans of Big Air. The Quick Release 3.0 was certificated with the french standard (AFNOR) and is therefore a quality and safety feature of the INFINITY 3.0 Airstyle BAR.

The Pull-Pull Adjuster makes presetting the depower possible with one handle. The integrated swivel function untwists the lines smoothly and flawlessly — even after many rotations — by simply powering up the Bar. In addition, the Bar width and the steering lines can be adjusted and optimized to meet the needs of the rider.

Flysurfer Infinity 3.0 Airstyle Bar Tech. Data

Quick Release 3.0 The Quick Release 3.0 (QR 3.0) is the core of the bar. It not only meets the French standard (AFNOR) in terms of safety and trigger forces, it is also extremely robust, compact, lightweight and of course reliable. A flexible, unbreakable Chicken Dick and a new ergonomic handle allow a quick and easy release of the kite in an emergency situation.	Infinite Rotations The smooth, integrated swivel function of the Quick Release 3.0 provides an automatic untwisting of the flying lines when powering up the bar. The safety system remains fully functional even after numerous rotations in one direction.
Ergonomic Grip Design The slim, lightweight Control Bar features a fresh-green signal color on the right-hand side and is available in two lengths – 50 and 60cm. The abrasion-resistant, ergonomic EVA grip is extremely comfortable for the hand and assures solid control even in cold or wet conditions.	Double-V-Shaped Eyelet The optimized and reduced-friction Double-V-Shaped Eylet ensures an easy and direct steering response. The powering up and depower functions work even when when you turn the Bar.
Pull-Pull Adjuster The Pull-Pull Adjuster allows for the adjustment of the ratio of the lines (front to control lines) with a short handle, even when the kite in the air. This allows the user to regulate the depower function optimally and quickly. Below the Adjuster is a simple sliding stopper ball. We recommend the use of the stopper ball to advanced riders and ambitious airstylers when kiting in constant winds.	Tuning Options At the integrated Winder you can change the bar width by up to 5 cm, which is recommended when using a bar for many kite sizes. Additionally, the control lines can be adjusted below the floaters, meaning you can counteract the effects of shortened steering lines and tendency to backstall. These features allow the bar setup to be individually adjusted to the rider.
Low Drag Flying Lines The low-drag flying lines (length: 21m) have an impressively-low air resistance (diameter: 1.45mm Front / Back 1,2mm) and a very high breaking load (300kg Front / Back 200kg). For years we have put our trust in our parter LIROS for supplying high-quality lines. The 60cm Airstlye Bar setup is additionally equipped with 6m extensions of the flying lines. Thanks to this feature, the low end gets even more effective when using one of our larger kites.	Frontline-Safety (FLS) It is our standard at FLYSURFER to use the system of the Frontline Safety – this additional FLS end line is incorporated approximately in the middle of a front line – the exact details are always dependent on the kite line and the kite size. However, some FLYSURFER kite lines use a different safey system. The VIRON, for example, has a Raff-Safety. For lovers of the 5th line, a FDS conversion kit (full depower system) is available in most product lines.

/p>

Flysurfer Infinity 3.0 Race Bar Pro

Read more on what Flysurfer says about the Flysurfer Infinity 3.0 Race Bar Pro

We know that in competition every small advantage counts. The Flysurfer Infinity 3.0 Race Bar Pro offers you a few trump cards: thinner low-drag flying line construction, a 4:1 Pulley Clam Cleat Adjuster, and optimized line guidance through the Double-V-Shaped Eylet

Any rider who is serious about competing and wants to get the maximum performance from the kite should look to the Flysurfer Infinity 3.0 Race Bar Pro. This bar has numerous features to aid you on your way to victory. Best grip, reliable safety function and several ways to customize the Bar setup leave the racer nothing to be desired. The Quick Release 2.0 was certificated with the french standard (AFNOR) and is therefore a Quality and Safety feature of the Flysurfer Infinity 3.0 Race Bar Pro. The 4:1 Pulley Clam Cleat Adjuster enables quick and accurate response to changing circumstances or specific competition situations.

The reduced diameter Race back-lines, the short Frontline Safety, and optimized line guidance through the Double-V-Shaped Eylet provide a maximum reduction of air resistance—and possibly the decisive advantage in your race. In addition, the bar width and the steering lines can be optimized to the needs of the rider. Flysurfer Infinity 3.0 Race Bar Pro is excluded from the 12-month Free-Repair Guarantee by FLYSURFER. This Bar setup is intended for Racing only and is not suitable for jumping! 

Flysurfer Infinity 3.0 Race Bar Pro Tech. Data

Quick Release 2.0 As expected, the Quick Release 2.0 (QR 2.0) has fullfilled the requirements for the French safety standard (AFNOR). No matter the circumstances, the QR 2.0 is always reliable and lets you get yourself out of a dangerous situation immediately and by using only one handle. It’s super smooth and can be conveniently unscrewed manually.	Ergonomic Grip Design The slim, lightweight Control Bar features a fresh-green signal color on the right-hand side and is available in two lengths – 50 and 60cm. The abrasion-resistant, ergonomic EVA grip is extremely comfortable for the hand and assures solid control even in cold or wet conditions.
Double-V-Shaped Eyelet The optimized and reduced-friction Double-V-Shaped Eylet ensures an easy and direct steering response. The powering up and depower function works even when when you turn the Bar	Clam-Cleat Race Adjuster The smooth-running 4:1 Pulley Clamcleat Race Adjuster stands apart with its simple and precise adjustment possibilities (with a 55cm-long depower distance).
Optimized Air Drag Race Flying Line System For the Race flying lines (length 21m), we have worked to find an optimal balance between diameter reduction and breaking load (front 1.45mm / 300kg – Back 0.8mm / 160kg). Additionally, we have conciously included a very short Frontline Safety (FLS), which represents an extension of a front line. This reduces the air resistance of the entire Race flying-line construction, which has the direct advantage of allowing the kit to reach higher speeds. Finally, the line guide is optimized by the double-V-Shaped eyelet in the Bar handle. Optional Race flying-line extensions in 2m or 4m are available in the FLYSURFER Webshop. For years we have put our trust in our parter LIROS for supplying high-quality lines.	Tuning Options At the integrated Winder you can change the bar width by up to 5 cm, which is recommended when using a bar for many kite sizes. Additionally, the control lines can be adjusted below the floaters, meaning you can counteract the effects of shortened steering lines and tendency to backstall. These features allow the bar setup to be individually adjusted to the rider.

Flysurfer Sonic Race Kite

Read more about what Flysurfer says about the Flysurfer Sonic Race Kite

The Flysurfer Sonic Race Kite instantly shows that we made no compromises in performance… get excited by exceptional efficiency – the race is on! At FLYSURFER Kiteboarding – the proving ground for kiteboarding technology – the dedication to the kite-racing sport isn’t just for show. It’s a science. Pushing the Flysurfer Sonic Race Kite to the limit reflects the spirit of the brand, and all of the men and women who strive for victory.

To strengthen our competitiveness and to lay the foundation for the success of our athletes, we are continuously investing in a great racing team and in research and development of our highest performance wing. The Flysurfer Sonic Race Kite developer Benni Boelli supports our athletes during the pro tour season to continously improve the product. You directly benefit from years of great team work and our absolute passion for hydrofoil, snowkite and kitebuggy racing.

The Flysurfer Sonic Race Kite lightweight construction is built upon our new X-Light fabric for maximum durability and highest stability. Our 3-Level Bridle Design and a total rework of the airfoil highly improves the aerodynamic efficiency; which results in stunning speeds with improved angles on all courses, and even better—almost unreal—lightwind abilities. Designed on short flying lines and supported by rigid construction and a new mixer which provides reliably-quick manouvering of the wing, the Flysurfer Sonic Race Kite shows its strength in gusty winds and let you fully focus on your riding to win the toughest races.

Flysurfer Sonic Race Kite Features

Hydrofoil, Race

The Flysurfer Sonic Race Kite shows FLYSURFER’s full commitment to kite racing. We are continually improving performance with each new model – striving for the highest speeds and the best angles on the course. The kite is highly efficient, powerful and aggressive – perfect for the fastest riders.