Navigation
Shop By
Category
  1. Snow Kites (26)
  2. Snowboards (1)
  3. Accessories (3)
  4. DVDs (1)
Manufacturer
  1. Flysurfer (7)
  2. HQ (5)
  3. Nobile (1)
  4. Ozone (15)
Price
  1. $0.00 - $999.99 (7)
  2. $1,000.00 - $1,999.99 (16)
  3. $2,000.00 and above (6)
Compare Products
My Cart

You have no items in your shopping cart.

Snow Kiting

When you want to take your wind walking into the polar sphere, Kite-Line has you covered with all the best snow kiting products including kites, boards, harnesses, and great gear by Flysurfer, HQ, Nobile, Ozone, and other top brands. Find everything you need to get started with snow kiting, or upgrade your set up right here at Kite-Line.

Items per page 5 10 15 20 25 All

// 29 Items //

  1. Kite Line 2015 Ozone R1 Kite

    Ozone R1 Kite (Kite Only)

    Price From:

    $2,015.00

    Special Price: $1,209.00

    Developed without compromise using proven Chrono technology, the R1 produces breath-taking speed and performance. The ultra clean leading edge, smooth surfaces and number of cells give an insight into its capabilities. But it's what you can't see that makes this race focused kite so special, the feeling on the bar and the responsiveness of this high aspect wing is unique. Our newly calculated sail tension brings a level of stability that surpasses every high performance kite we have ever produced by far. Combined with new diagonal ribs, a high aspect ratio planform, reduced cell width and a new high performance profile the boundaries of performance have been re-defined again.

     

     

    The R1 is truly a race pedigree performance kite that will inspire confidence to the rider while delivering outstanding racing performance on the water, land or snow. The R1 is for advanced riders only who have previous foil kite experience. It is not difficult to fly but there are techniques required to fly a high aspect ratio foil kite. The R1 will require maintenance just like any high performance equipment in racing sports, for example replacing tires or piston rings on motorbikes, the R1's Speed System and Bridle Lines must be replaced after every 60 hours flying time.

     

     

    The R1 is a closed cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. The R1 features a simple yet effective front line flag out release. After releasing the flag out you should check the speed system, bridle lines and your flying lines for twists before restart. The R1 is not a wave kite and should not be used in waves.

     

     

    2015 Ozone R1 Design and Performance Features

     

    • High cell count – The high number of cells in the R1 reduces ballooning between the cells holding the wing shape and surfaces smoother and cleaner. This creates a reduction in turbulent airflow, giving the R1 more speed and increased depower.
    • Optimized leading edge air intakes – Precisely positioned intake valves along the LE lead to a stability increase and a more solid kite downwind. The inflation is also now easier and safer as the kite rapidly inflates.
    • LE profile reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
    • Internal diagonals and straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load into and across the sail evenly and effectively. Together the diagonals and straps lower sail tension and increase the structural balance that helps control this high aspect ratio kite.
    • High performance bridle lines – Using high performance thin Kevlar bridle line, the R1 flies faster, and so accelerates faster giving it higher performance, more range and more depower due to less drag.
    • High performance materials – High-tenacity sail cloth with extremely low porosity values and an overall lightweight enable us to further stabilise the canopy and maximise fast flight characteristics.
    • Velcro + water out channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.

     

    2015 Ozone R1 Wind Range

     

     

    2015 Ozone R1 Colors

     

     

    Learn More
  2. Kite Line 2015 Ozone R1 Kite

    Ozone R1 Complete w/Race Bar & Lines

    Price From:

    $2,700.00

    Special Price: $1,829.00

    Developed without compromise using proven Chrono technology, the R1 produces breath-taking speed and performance. The ultra clean leading edge, smooth surfaces and number of cells give an insight into its capabilities. But it's what you can't see that makes this race focused kite so special, the feeling on the bar and the responsiveness of this high aspect wing is unique. Our newly calculated sail tension brings a level of stability that surpasses every high performance kite we have ever produced by far. Combined with new diagonal ribs, a high aspect ratio planform, reduced cell width and a new high performance profile the boundaries of performance have been re-defined again.

     

     

    The R1 is truly a race pedigree performance kite that will inspire confidence to the rider while delivering outstanding racing performance on the water, land or snow. The R1 is for advanced riders only who have previous foil kite experience. It is not difficult to fly but there are techniques required to fly a high aspect ratio foil kite. The R1 will require maintenance just like any high performance equipment in racing sports, for example replacing tires or piston rings on motorbikes, the R1's Speed System and Bridle Lines must be replaced after every 60 hours flying time.

     

     

    The R1 is a closed cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. The R1 features a simple yet effective front line flag out release. After releasing the flag out you should check the speed system, bridle lines and your flying lines for twists before restart. The R1 is not a wave kite and should not be used in waves.

     

     

    2015 Ozone R1 Design and Performance Features

     

    • High cell count – The high number of cells in the R1 reduces ballooning between the cells holding the wing shape and surfaces smoother and cleaner. This creates a reduction in turbulent airflow, giving the R1 more speed and increased depower.
    • Optimized leading edge air intakes – Precisely positioned intake valves along the LE lead to a stability increase and a more solid kite downwind. The inflation is also now easier and safer as the kite rapidly inflates.
    • LE profile reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
    • Internal diagonals and straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load into and across the sail evenly and effectively. Together the diagonals and straps lower sail tension and increase the structural balance that helps control this high aspect ratio kite.
    • High performance bridle lines – Using high performance thin Kevlar bridle line, the R1 flies faster, and so accelerates faster giving it higher performance, more range and more depower due to less drag.
    • High performance materials – High-tenacity sail cloth with extremely low porosity values and an overall lightweight enable us to further stabilise the canopy and maximise fast flight characteristics.
    • Velcro + water out channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.

     

    2015 Ozone R1 Wind Range

     

     

    2015 Ozone R1 Colors

     

     

    Learn More
  3. Kite Line Ozone Hyperlink VI Kite

    Ozone Hyperlink VI Kite (Kite Only)

    Price From: $1,500.00

    Ozone Hyperlink VI Kite

     

    Read more about what Ozone says about the Ozone Hyperlink VI Kite

     

    Innovation is often inspired by being in the right place, at the right time, with all the right connections coming together allowing the genesis of a new vision or era. The Ozone Hyperlink VI Kite is our vision to take you into that new era. The design brief was outrageous - develop a kite to bridge the gap between inflatable and foil kites while making it excel on water, snow and land. 

     

     

    The Ozone Hyperlink VI Kite is a true multipurpose foil kite, it brings together the performance of a foil with the feeling of an inflatable. One kite to cover almost every aspect of kiting! Free ride, hydrofoil, boost and float, air style or unhooked, backcountry snow missions, you name it and it delivers.The Ozone Hyperlink VI Kite is unique, it’s the first foil kite to be as dynamic and fun to ride as a performance inflatable. With an unparalleled level of stability, handling and bar feeling the Hyperlink takes it to the next level.

     

     

    With an innovative valve design it can be ridden on the water, snow and land safely, as a Closed Cell or Open Cell kite. We know many inflatable kite riders can see the advantages of high performance foil kites such as the Chrono or R1, however the bridle lines and complexity can be daunting. The Ozone Hyperlink VI Kite is simple and user friendly, the mid aspect ratio and minimal bridle plan makes taking the jump from inflatable to foil kite easy! No matter how hard-core inflatable you are, now is the time to expand your universe. Take that step into the unknown - the reward is more adrenaline, more riding time and a new feeling!

     

     

    Ozone Hyperlink VI Kite Open Cell vs. Closed Cell Modes

     

    Watch the how-to video to ensure you understand correct techniques and how to change between Closed Cell and Open Cell modes.

    • Closed Cell Mode
      • Closed Cell Mode is recommended when riding on water.
      • Inflation is quick and smooth after pre-inflating the kite.
      • If you are already an inflatable kite rider it will only take you one session to get to know the Hyperlink.
      • For twin tip riders once the kite is in the air and powered up the similarities to an inflatable kite can be felt.
      • It has progressive handling, generates smooth consistent power, great upwind performance and jumps well with long hang time and smooth landings.
      • Ideal for Foil Board riding, the Hyperlink produces more power than an inflatable kite size per size - this means you can use a smaller more maneuverable kite to generate power.
      • Maneuvers are made easy thanks to the stability and lift produced as the Hyperlink flies through the zenith – a great help when learning to tack and gybe giving you time and float to change board direction.
      • In light winds the Hyperlink will fly above you unlike inflatable kites that have a tendency to fall out of the sky. This makes getting set up for starting stress free.

     

    • Open Cell Mode
      • Open Cell Mode is recommended when riding on snow or land.
      • Similar inflation as in Closed Cell Mode, slightly quicker due to the valve zips being open.
      • Snow and land riding are a blast, the easy inflation and 5-Line Re-Ride Release System means it can be taken anywhere safely.
      • The Hyperlink combines the perfect balance of handling, pop and float to make the most of terrain and flats.
      • It is easy to get big air on this machine!

     

     

    Ozone Hyperlink VI Kite Release Landing Systems

     

    • 4-Line: The Hyperlink comes standard with our Front Line Flag Out Release System. This is recommended for water use – it is a simple and effective flag out when the release is activated – it works the same way as our 4-line inflatable water kite range.
    • 5-Line (use in Open Cell mode only): The optional 5-Line Re-Ride Release System Conversion Kit is recommended for snow or land use. The Re-Ride Release System de-powers the kite instantly without tangling, and falls to the ground to re-launch when ready.
    • Back Line Brake Handle: A quick and easy landing option in light winds - the Hyperlink can be stalled down the ground using the Brake Handle.

     

    Ozone Hyperlink VI Kite Design & Performance Features

     

    • Innovative Zip Valve – Our newly developed Zip Valve allows the Hyperlink to be used as a Closed Cell or Open Cell kite. Essentially opening the Zip Valve converts the kite from a Closed to an Open cell foil, allowing air to pass in both directions. On the snow this is a great advantage as the kite can be landed and packed like a conventional open cell foil.
    • 4-line and 5-line modes – The Hyperlink comes standard with our Front Line Flag Out Release System. This is recommended for water use – it is a simple and effective flag out when the release is activated – it works the same way as our 4-line inflatable water kite range. The optional 5-Line Re-Ride Release System Conversion Kit is recommended for snow or land use. The Re-Ride Release System de-powers the kite instantly without tangling, and falls to the ground to relaunch when ready.
    • High performance materials – High-tenacity durable sailcloth with a superior strength to weight ratio.
    • Internal diagonals and straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.
    • Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification used on the Chrono and Snowkite range.
    • LE Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow. This drastically improves overall performance as the foil remains true to the designed shape.
    • Designed with OZ-CAD – The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • Exceptional Ozone Factory construction – World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Water Drainage Channels – An internal channel is shaped into the end of each cell along the trailing edge. This allows loose sand or water to run between the cells and out of the tips during flight. The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
    • Comparable feeling throughout the size range – We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

     

    Ozone Hyperlink VI Kite Wind Range & Bar Size Land & Water

     

     

    Ozone Hyperlink VI Kite Important Notes

     

    • The kite is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. Do not use the kite in waves.
    • Always use a Brake Handle when flying a foil kite. This is the handle/line spanned between the back leader lines on your control system. This easy to grab handle makes inflation, self-landing and reverse launch easier.
    • This kite features a simple yet effective front line flag out release (4-Line mode) or optional 5-Line Re-Ride Release. *Only use the 5-Line release when the kite is in Open Cell mode. After releasing the flag out you should check the speed system, bridle lines and flying lines for twists before restart.
    • Speed System and Bridle lines should be regularly checked and maintained in the correct trim or the kite will not perform as designed. If they are worn or not to factory specification (+ or - 15mm) they must be replaced.

     

    Ozone Hyperlink VI Kite Sizes

     

    5 - 7 - 9 - 12m

     

    Learn More
  4. Kite Line Ozone Connect Pro Harness w/Spreader

    Ozone Connect Pro Harness w/Spreader Bar

    $250.00

    Ozone Connect Pro Harness 

     

    Read more on what Ozone has to say about the Ozone Connect Pro Harness w/Spreader Bar 

     

    The Ozone Connect Pro Harness is designed for comfort, support and flexibility in use, this harness is perfect to wear over or under your snow gear. Featuring high quality Aluminium adjustment buckles on the spreader bar and leg straps. The Ozone Connect Pro Harness has been designed like a rock climbing harness so that it will not ride up.

    • Waist harness with removable leg straps is ideal for all snow and land kiters
    • Strong yet lightweight construction
    • Stainless Steel spreader bar with comfortable spreader pad
    • Ergonomic shaping and enhanced load distribution
    • Fully adjustable so one size fits all

     

     

    Ozone Connect Pro Harness Features

     

    Spreader bar - The Stainless Steel spreader bar attaches directly to both the harness and the leg straps reducing spreader bar upward tilt. Extra padding and neoprene covered for comfort.
    Aluminium buckles - High quality extra strong aluminium adjustment buckles are easy to open and close. This makes fitting on the harness very easy even under snow gear. Smooth adjustment reduces wear on webbing.
    Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.
    Removable leg support straps - Color coded, thin and light yet comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding. They can be easily removed or fitted under your snow pants without having to take them off.
    Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
    Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.
    Technical backpack connection - Female buckles on each side connect directly with Frenzy and Summit technical backpacks. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.
    Kite leash attachment - Easy to access front kite leash attachment.
    Webbing loop attachments - Attach a grab handle or ropes for pulling sledges to the webbing loops on each side of the harness.
    One size fits all - Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.

     

    Learn More
  5. Kite Line Ozone Chrono V2 Kiteboarding Kite

    Ozone Chrono V2 Kiteboarding Kite w/Race Bar & Lines

    Price From: $2,215.00

    Ozone Chrono Kiteboarding Kite

    The Ozone Chrono Kiteboarding Kite is crafted from a HighPerformance light weight canopy material containing Leading Edge profile plastic batten reinforcements, and Mesh Protection inflation valves for fast inflation and no deflation. The Ozone Chrono Kiteboarding Kites exceptional hand checked Ozone factory construction using the highest quality materials and contains Internal Reinforcements and Strapping for improved durability and load distribution. Ozone Chrono Kiteboarding Kites aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance. Ozone Chrono Kiteboarding Kites contain High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics. Making Ozone Chrono Kiteboarding Kites ready for whatever the day has to offer.

     

     

    Ozone Chrono Kiteboarding Kite Tech Specs

     

    • Performance Double Surface – The Chrono V2 lightweight double surface design is combined with a mid-high aspect ratio and 46 cells. The high number of cells means the ribs are positioned closer together, creating ultra smooth surfaces with reduced drag and maintaining a clean profile, resulting in superior flight efficiency.
    • Mid-High Aspect Ratio and New Planform – The aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance.
    • Optimized Leading Edge Air Intakes – Newly designed intake valves are precisely positioned along the LE on the upper and lower surfaces. This leads to a stability increase and a more solid kite. The inflation is now easier and safer as the kite rapidly inflates from the center to the wingtips.
    • Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
    • Internal Straps – Internal span-wise straps distribute load across the sail evenly and effectively, while also maintaining a cohesive internal balance controlling the high aspect ratio.
    • Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification that we use on our Snowkite range. The lines are thicker and stiffer compared to the R1’s high performance Kevlar line, and the sheath makes them less prone to damage.
    • Velcro and Water Out Channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean and dry your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
    • High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics.

     

     

    Ozone Chrono Kiteboarding Kite Construction Features

     

    • Exceptional hand checked Ozone factory construction using the highest quality materials
    • High performance light weight canopy material
    • Leading Edge profile plastic batten reinforcements
    • Internal reinforcements and strapping improve durability and load distribution
    • Mesh protected inflation valves for fast inflation and no deflation
    • Double pulley speed-system, utilizing the latest high spec low friction Ronstan Orbit pulleys
    • Color coded and numbered fool proof line connectors
    • Velcro openings on last tip cell for easy wash out of debris and water
    • Water proof deflation zipper on top center cell for easy and fast deflation

     

    Ozone Chrono Kiteboarding Kite Colors

     Please Secify Color when Ordering (Green-Blue-Red)

     

    Ozone Chrono Kiteboarding Kite Wind

     

     

    Ozone Chrono Kiteboarding Kite Bar Options

     

     

    Ozone Chrono Kiteboarding Kite Information

     

    Our design goal with the second version was to take the original Chrono’s high performance characteristics and make it easier to use for riders looking for all around ability in any conditions on any surface. The Chrono V2 is more stable and easier to inflate; additionally this model has thicker sheathed Dyneema bridle lines to reduce tangles on the ground. New sizes cover a wider range of conditions to personalize your high performance quiver. The Chrono V2 is for experienced riders with good kite control skills or previous foil kite experience. It is not difficult to fly, but there are specific techniques required to ground handle and fly high aspect ratio foil kites safely. Experienced riders will find themselves at home with the Chrono V2. On the water with a Twin-tip the Chrono V2 large sizes are light wind monsters - loads of power, easy to jump and stable. Due to the abundance of power and efficiency, gaining upwind ground is ridiculously easy. In light winds it is impressive how high and floaty jumps can be! When the wind picks up and you are looking for serious height the smaller sizes really shine, no question at all, these are pop and go big machines, just edge hard and send it, too easy!

     

     


    Riding with a Foil or Race board the benefits are immediately noticeable thanks to the longer lifting period a foil kite gives you during that critical tacking moment compared to an LEI. The combined performance of the kite and these types of boards makes 4 knot riding a true reality. On the snow the Chrono V2 takes the sport to another level, more power and performance in light winds, extended jump and flight time with a much better glide angle. The improved handling makes it possible to ride in lighter winds just by generating apparent speed, which means you can take a smaller size. On the land the gains we have made in kite stability mean that you can work on your landboard freestyle moves without worrying about the kite collapsing or falling out of the sky. For buggy riders the improvements mean freestyle or racing maneuvers are easy and more intuitive with smoother coordinated handling. The Chrono V2 is a closed-cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! Using the re-launch webbing handle that connects the rear flying lines it is possible to reverse the kite off the water and continue riding. We recommend you practice this technique. An internal drainage channel running through to both wing tips allows any water that may have entered the kite to drain out. The Chrono V2 is not a wave kite and should not be used in waves. The Chrono V2 features a simple yet effective front line flag out release. After releasing the flag out always check the speed system, bridle lines and flying lines for twists before restart. The Chrono V2 will require maintenance just like any high performance equipment in racing sports, for example replacing tyres or piston rings on motorbikes. The Speed System and Bridle Lines must be checked after every 60 hours flying time, if they are worn or are not to factory specifications (+ or - 15mm) they must be replaced or the kite will not perform as designed.

     

    Learn More
  6. Kite Line Ozone Chrono V2 Kiteboarding Kite

    Ozone Chrono V2 Kiteboarding Kite w/Freeride Bar & Lines

    Price From: $2,180.00

    Ozone Chrono Kiteboarding Kite

    The Ozone Chrono Kiteboarding Kite is crafted from a HighPerformance light weight canopy material containing Leading Edge profile plastic batten reinforcements, and Mesh Protection inflation valves for fast inflation and no deflation. The Ozone Chrono Kiteboarding Kites exceptional hand checked Ozone factory construction using the highest quality materials and contains Internal Reinforcements and Strapping for improved durability and load distribution. Ozone Chrono Kiteboarding Kites aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance. Ozone Chrono Kiteboarding Kites contain High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics. Making Ozone Chrono Kiteboarding Kites ready for whatever the day has to offer.

     

     

    Ozone Chrono Kiteboarding Kite Tech Specs

     

    • Performance Double Surface – The Chrono V2 lightweight double surface design is combined with a mid-high aspect ratio and 46 cells. The high number of cells means the ribs are positioned closer together, creating ultra smooth surfaces with reduced drag and maintaining a clean profile, resulting in superior flight efficiency.
    • Mid-High Aspect Ratio and New Planform – The aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance.
    • Optimized Leading Edge Air Intakes – Newly designed intake valves are precisely positioned along the LE on the upper and lower surfaces. This leads to a stability increase and a more solid kite. The inflation is now easier and safer as the kite rapidly inflates from the center to the wingtips.
    • Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
    • Internal Straps – Internal span-wise straps distribute load across the sail evenly and effectively, while also maintaining a cohesive internal balance controlling the high aspect ratio.
    • Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification that we use on our Snowkite range. The lines are thicker and stiffer compared to the R1’s high performance Kevlar line, and the sheath makes them less prone to damage.
    • Velcro and Water Out Channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean and dry your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
    • High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics.

     

     

    Ozone Chrono Kiteboarding Kite Construction Features

     

    • Exceptional hand checked Ozone factory construction using the highest quality materials
    • High performance light weight canopy material
    • Leading Edge profile plastic batten reinforcements
    • Internal reinforcements and strapping improve durability and load distribution
    • Mesh protected inflation valves for fast inflation and no deflation
    • Double pulley speed-system, utilizing the latest high spec low friction Ronstan Orbit pulleys
    • Color coded and numbered fool proof line connectors
    • Velcro openings on last tip cell for easy wash out of debris and water
    • Water proof deflation zipper on top center cell for easy and fast deflation

     

    Ozone Chrono Kiteboarding Kite Colors

     Please Secify Color when Ordering (Green-Blue-Red)

     

    Ozone Chrono Kiteboarding Kite Wind

     

     

    Ozone Chrono Kiteboarding Kite Bar Options

     

     

    Ozone Chrono Kiteboarding Kite Information

     

    Our design goal with the second version was to take the original Chrono’s high performance characteristics and make it easier to use for riders looking for all around ability in any conditions on any surface. The Chrono V2 is more stable and easier to inflate; additionally this model has thicker sheathed Dyneema bridle lines to reduce tangles on the ground. New sizes cover a wider range of conditions to personalize your high performance quiver. The Chrono V2 is for experienced riders with good kite control skills or previous foil kite experience. It is not difficult to fly, but there are specific techniques required to ground handle and fly high aspect ratio foil kites safely. Experienced riders will find themselves at home with the Chrono V2. On the water with a Twin-tip the Chrono V2 large sizes are light wind monsters - loads of power, easy to jump and stable. Due to the abundance of power and efficiency, gaining upwind ground is ridiculously easy. In light winds it is impressive how high and floaty jumps can be! When the wind picks up and you are looking for serious height the smaller sizes really shine, no question at all, these are pop and go big machines, just edge hard and send it, too easy!

     

     


    Riding with a Foil or Race board the benefits are immediately noticeable thanks to the longer lifting period a foil kite gives you during that critical tacking moment compared to an LEI. The combined performance of the kite and these types of boards makes 4 knot riding a true reality. On the snow the Chrono V2 takes the sport to another level, more power and performance in light winds, extended jump and flight time with a much better glide angle. The improved handling makes it possible to ride in lighter winds just by generating apparent speed, which means you can take a smaller size. On the land the gains we have made in kite stability mean that you can work on your landboard freestyle moves without worrying about the kite collapsing or falling out of the sky. For buggy riders the improvements mean freestyle or racing maneuvers are easy and more intuitive with smoother coordinated handling. The Chrono V2 is a closed-cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! Using the re-launch webbing handle that connects the rear flying lines it is possible to reverse the kite off the water and continue riding. We recommend you practice this technique. An internal drainage channel running through to both wing tips allows any water that may have entered the kite to drain out. The Chrono V2 is not a wave kite and should not be used in waves. The Chrono V2 features a simple yet effective front line flag out release. After releasing the flag out always check the speed system, bridle lines and flying lines for twists before restart. The Chrono V2 will require maintenance just like any high performance equipment in racing sports, for example replacing tyres or piston rings on motorbikes. The Speed System and Bridle Lines must be checked after every 60 hours flying time, if they are worn or are not to factory specifications (+ or - 15mm) they must be replaced or the kite will not perform as designed.

     

    Learn More
  7. Kite Line Ozone Chrono Ultralight V2 Race Kite w/Race Bar & Lines

    Ozone Chrono Ultralight V2 Race Kite w/Race Bar & Lines

    Price From: $2,475.00

    Ozone Chrono Ultralight V2 Race Kite

     

    Read more about what Ozone says about the Ozone Chrono Ultralight V2 Race Kite

     

    During the development of the R1 V2 we experienced the overall enhancement in performance achieved from a lighter weight kite. The Ozone Chrono Ultralight V2 Race Kite combines our high quality lightweight materials used on the R1 V2, with the proven Chrono V2 design for the ultimate all-round performance experience. The UltraLight version offers true performance increases and enhanced flying characteristics compared to the standard Chrono V2. It inflates quicker, launches in lighter winds, flies faster, stays in the air longer in gusty conditions, and is more reactive even in the lightest breeze. Weight and packing volume is reduced to a minimum, ideal for travelling and expeditions. The Ozone Chrono Ultralight V2 Race Kite is 25% lighter than the standard Chrono V2, and packs down to around half the size! The technical backpack is the same design as the standard version, also using lighter materials saving weight once again.

     

     

    Our design goal with the second version was to take the original Chrono’s high performance characteristics and make it easier to use for riders looking for all around ability in any conditions on any surface. The Ozone Chrono Ultralight V2 Race Kite is more stable and easier to inflate; additionally this model has thicker sheathed Dyneema bridle lines to reduce tangles on the ground. New sizes cover a wider range of conditions to personalize your high performance quiver. The Ozone Chrono Ultralight V2 Race Kite is for experienced riders with good kite control skills or previous foil kite experience. It is not difficult to fly, but there are specific techniques required to ground handle and fly high aspect ratio foil kites safely. Experienced riders will find themselves at home with the Ozone Chrono Ultralight V2 Race Kite. On the water with a Twin-tip the Ozone Chrono Ultralight V2 Race Kite large sizes are light wind monsters - loads of power, easy to jump and stable. Due to the abundance of power and efficiency, gaining upwind ground is ridiculously easy. In light winds it is impressive how high and floaty jumps can be! When the wind picks up and you are looking for serious height the smaller sizes really shine, no question at all, these are pop and go big machines, just edge hard and send it, too easy! Riding with a Foil or Race board the benefits are immediately noticeable thanks to the longer lifting period a foil kite gives you during that critical tacking moment compared to an LEI. The combined performance of the kite and these types of boards makes 4 knot riding a true reality. On the snow the Ozone Chrono Ultralight V2 Race Kite takes the sport to another level, more power and performance in light winds, extended jump and flight time with a much better glide angle. The improved handling makes it possible to ride in lighter winds just by generating apparent speed, which means you can take a smaller size.

     

     

    On the land the gains we have made in kite stability mean that you can work on your landboard freestyle moves without worrying about the kite collapsing or falling out of the sky. For buggy riders the improvements mean freestyle or racing maneuvers are easy and more intuitive with smoother coordinated handling. The Ozone Chrono Ultralight V2 Race Kite is a closed-cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! Using the re-launch webbing handle that connects the rear flying lines it is possible to reverse the kite off the water and continue riding. We recommend you practice this technique. An internal drainage channel running through to both wing tips allows any water that may have entered the kite to drain out. The Ozone Chrono Ultralight V2 Race Kite is not a wave kite and should not be used in waves. The Ozone Chrono Ultralight V2 Race Kite features a simple yet effective front line flag out release. After releasing the flag out always check the speed system, bridle lines and flying lines for twists before restart. The Ozone Chrono Ultralight V2 Race Kite will require maintenance just like any high performance equipment in racing sports, for example replacing tyres or piston rings on motorbikes. The Speed System and Bridle Lines must be checked after every 60 hours flying time, if they are worn or are not to factory specifications (+ or - 15mm) they must be replaced or the kite will not perform as designed.

     

     

    Ozone Chrono Ultralight V2 Race Kite Tech. Specs.

     

    • Performance Double Surface – The Chrono V2 lightweight double surface design is combined with a mid-high aspect ratio and 46 cells. The high number of cells means the ribs are positioned closer together, creating ultra smooth surfaces with reduced drag and maintaining a clean profile, resulting in superior flight efficiency.
    • Mid-High Aspect Ratio and New Planform – The aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance.
    • Optimized Leading Edge Air Intakes – Newly designed intake valves are precisely positioned along the LE on the upper and lower surfaces. This leads to a stability increase and a more solid kite. The inflation is now easier and safer as the kite rapidly inflates from the center to the wingtips.
    • Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
    • Internal Straps – Internal span-wise straps distribute load across the sail evenly and effectively, while also maintaining a cohesive internal balance controlling the high aspect ratio.
    • Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification that we use on our Snowkite range. The lines are thicker and stiffer compared to the R1’s high performance Kevlar line, and the sheath makes them less prone to damage.
    • Velcro and Water Out Channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean and dry your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
    • High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics.

     

     

    Ozone Chrono Ultralight V2 Race Kite Construction

     

    • High performance light weight canopy material
    • Leading Edge profile plastic batten reinforcements
    • Internal reinforcements and strapping improve durability and load distribution
    • Mesh protected inflation valves for fast inflation and no deflation
    • Double pulley speed-system, utilizing the latest high spec low friction Ronstan Orbit pulleys
    • Color coded and numbered fool proof line connectors
    • Velcro openings on last tip cell for easy wash out of debris and water
    • Water proof deflation zipper on top center cell for easy and fast deflation

     

     

    Wind & Bar Size

     

     

    Ozone Chrono Ultralight V2 Race Kite Colors

     

    Blue/White - Orange/White Please Specify Color when Ordering

     

     

     

    Learn More
  8. Kite Line Ozone Chrono Ultralight V2 Race Kite with Freeride Bar & Lines

    Ozone Chrono Ultralight V2 Race Kite w/Freeride Bar & Lines

    Price From: $2,455.00

    Ozone Chrono Ultralight V2 Race Kite

     

    Read more about what Ozone says about the Ozone Chrono Ultralight V2 Race Kite

     

    During the development of the R1 V2 we experienced the overall enhancement in performance achieved from a lighter weight kite. The Ozone Chrono Ultralight V2 Race Kite combines our high quality lightweight materials used on the R1 V2, with the proven Chrono V2 design for the ultimate all-round performance experience. The UltraLight version offers true performance increases and enhanced flying characteristics compared to the standard Chrono V2. It inflates quicker, launches in lighter winds, flies faster, stays in the air longer in gusty conditions, and is more reactive even in the lightest breeze. Weight and packing volume is reduced to a minimum, ideal for travelling and expeditions. The Ozone Chrono Ultralight V2 Race Kite is 25% lighter than the standard Chrono V2, and packs down to around half the size! The technical backpack is the same design as the standard version, also using lighter materials saving weight once again.

     

     

    Our design goal with the second version was to take the original Chrono’s high performance characteristics and make it easier to use for riders looking for all around ability in any conditions on any surface. The Ozone Chrono Ultralight V2 Race Kite is more stable and easier to inflate; additionally this model has thicker sheathed Dyneema bridle lines to reduce tangles on the ground. New sizes cover a wider range of conditions to personalize your high performance quiver. The Ozone Chrono Ultralight V2 Race Kite is for experienced riders with good kite control skills or previous foil kite experience. It is not difficult to fly, but there are specific techniques required to ground handle and fly high aspect ratio foil kites safely. Experienced riders will find themselves at home with the Ozone Chrono Ultralight V2 Race Kite. On the water with a Twin-tip the Ozone Chrono Ultralight V2 Race Kite large sizes are light wind monsters - loads of power, easy to jump and stable. Due to the abundance of power and efficiency, gaining upwind ground is ridiculously easy. In light winds it is impressive how high and floaty jumps can be! When the wind picks up and you are looking for serious height the smaller sizes really shine, no question at all, these are pop and go big machines, just edge hard and send it, too easy! Riding with a Foil or Race board the benefits are immediately noticeable thanks to the longer lifting period a foil kite gives you during that critical tacking moment compared to an LEI. The combined performance of the kite and these types of boards makes 4 knot riding a true reality. On the snow the Ozone Chrono Ultralight V2 Race Kite takes the sport to another level, more power and performance in light winds, extended jump and flight time with a much better glide angle. The improved handling makes it possible to ride in lighter winds just by generating apparent speed, which means you can take a smaller size.

     

     

    On the land the gains we have made in kite stability mean that you can work on your landboard freestyle moves without worrying about the kite collapsing or falling out of the sky. For buggy riders the improvements mean freestyle or racing maneuvers are easy and more intuitive with smoother coordinated handling. The Ozone Chrono Ultralight V2 Race Kite is a closed-cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! Using the re-launch webbing handle that connects the rear flying lines it is possible to reverse the kite off the water and continue riding. We recommend you practice this technique. An internal drainage channel running through to both wing tips allows any water that may have entered the kite to drain out. The Ozone Chrono Ultralight V2 Race Kite is not a wave kite and should not be used in waves. The Ozone Chrono Ultralight V2 Race Kite features a simple yet effective front line flag out release. After releasing the flag out always check the speed system, bridle lines and flying lines for twists before restart. The Ozone Chrono Ultralight V2 Race Kite will require maintenance just like any high performance equipment in racing sports, for example replacing tyres or piston rings on motorbikes. The Speed System and Bridle Lines must be checked after every 60 hours flying time, if they are worn or are not to factory specifications (+ or - 15mm) they must be replaced or the kite will not perform as designed.

     

     

    Ozone Chrono Ultralight V2 Race Kite Tech. Specs.

     

    • Performance Double Surface – The Chrono V2 lightweight double surface design is combined with a mid-high aspect ratio and 46 cells. The high number of cells means the ribs are positioned closer together, creating ultra smooth surfaces with reduced drag and maintaining a clean profile, resulting in superior flight efficiency.
    • Mid-High Aspect Ratio and New Planform – The aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance.
    • Optimized Leading Edge Air Intakes – Newly designed intake valves are precisely positioned along the LE on the upper and lower surfaces. This leads to a stability increase and a more solid kite. The inflation is now easier and safer as the kite rapidly inflates from the center to the wingtips.
    • Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
    • Internal Straps – Internal span-wise straps distribute load across the sail evenly and effectively, while also maintaining a cohesive internal balance controlling the high aspect ratio.
    • Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification that we use on our Snowkite range. The lines are thicker and stiffer compared to the R1’s high performance Kevlar line, and the sheath makes them less prone to damage.
    • Velcro and Water Out Channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean and dry your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
    • High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics.

     

     

    Ozone Chrono Ultralight V2 Race Kite Construction

     

    • High performance light weight canopy material
    • Leading Edge profile plastic batten reinforcements
    • Internal reinforcements and strapping improve durability and load distribution
    • Mesh protected inflation valves for fast inflation and no deflation
    • Double pulley speed-system, utilizing the latest high spec low friction Ronstan Orbit pulleys
    • Color coded and numbered fool proof line connectors
    • Velcro openings on last tip cell for easy wash out of debris and water
    • Water proof deflation zipper on top center cell for easy and fast deflation

     

     

    Wind & Bar Size

     

     

    Ozone Chrono Ultralight V2 Race Kite Colors

     

    Blue/White - Orange/White Please Specify Color when Ordering

     

     

     

    Learn More
  9. Kite Line Ozone Chrono Ultralight V2 Race Kite

    Ozone Chrono Ultralight V2 Race Kite (Kite Only)

    Price From: $1,975.00

    Ozone Chrono Ultralight V2 Race Kite (Kite Only)

     

    Read more about what Ozone says about the Ozone Chrono Ultralight V2 Race Kite

     

    During the development of the R1 V2 we experienced the overall enhancement in performance achieved from a lighter weight kite. The Ozone Chrono Ultralight V2 Race Kite combines our high quality lightweight materials used on the R1 V2, with the proven Chrono V2 design for the ultimate all-round performance experience. The UltraLight version offers true performance increases and enhanced flying characteristics compared to the standard Chrono V2. It inflates quicker, launches in lighter winds, flies faster, stays in the air longer in gusty conditions, and is more reactive even in the lightest breeze. Weight and packing volume is reduced to a minimum, ideal for travelling and expeditions. The Ozone Chrono Ultralight V2 Race Kite is 25% lighter than the standard Chrono V2, and packs down to around half the size! The technical backpack is the same design as the standard version, also using lighter materials saving weight once again.

     

     

    Our design goal with the second version was to take the original Chrono’s high performance characteristics and make it easier to use for riders looking for all around ability in any conditions on any surface. The Ozone Chrono Ultralight V2 Race Kite is more stable and easier to inflate; additionally this model has thicker sheathed Dyneema bridle lines to reduce tangles on the ground. New sizes cover a wider range of conditions to personalize your high performance quiver. The Ozone Chrono Ultralight V2 Race Kite is for experienced riders with good kite control skills or previous foil kite experience. It is not difficult to fly, but there are specific techniques required to ground handle and fly high aspect ratio foil kites safely. Experienced riders will find themselves at home with the Ozone Chrono Ultralight V2 Race Kite. On the water with a Twin-tip the Ozone Chrono Ultralight V2 Race Kite large sizes are light wind monsters - loads of power, easy to jump and stable. Due to the abundance of power and efficiency, gaining upwind ground is ridiculously easy. In light winds it is impressive how high and floaty jumps can be! When the wind picks up and you are looking for serious height the smaller sizes really shine, no question at all, these are pop and go big machines, just edge hard and send it, too easy! Riding with a Foil or Race board the benefits are immediately noticeable thanks to the longer lifting period a foil kite gives you during that critical tacking moment compared to an LEI. The combined performance of the kite and these types of boards makes 4 knot riding a true reality. On the snow the Ozone Chrono Ultralight V2 Race Kite takes the sport to another level, more power and performance in light winds, extended jump and flight time with a much better glide angle. The improved handling makes it possible to ride in lighter winds just by generating apparent speed, which means you can take a smaller size.

     

     

    On the land the gains we have made in kite stability mean that you can work on your landboard freestyle moves without worrying about the kite collapsing or falling out of the sky. For buggy riders the improvements mean freestyle or racing maneuvers are easy and more intuitive with smoother coordinated handling. The Ozone Chrono Ultralight V2 Race Kite is a closed-cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! Using the re-launch webbing handle that connects the rear flying lines it is possible to reverse the kite off the water and continue riding. We recommend you practice this technique. An internal drainage channel running through to both wing tips allows any water that may have entered the kite to drain out. The Ozone Chrono Ultralight V2 Race Kite is not a wave kite and should not be used in waves. The Ozone Chrono Ultralight V2 Race Kite features a simple yet effective front line flag out release. After releasing the flag out always check the speed system, bridle lines and flying lines for twists before restart. The Ozone Chrono Ultralight V2 Race Kite will require maintenance just like any high performance equipment in racing sports, for example replacing tyres or piston rings on motorbikes. The Speed System and Bridle Lines must be checked after every 60 hours flying time, if they are worn or are not to factory specifications (+ or - 15mm) they must be replaced or the kite will not perform as designed.

     

     

    Ozone Chrono Ultralight V2 Race Kite Tech. Specs.

     

    • Performance Double Surface – The Chrono V2 lightweight double surface design is combined with a mid-high aspect ratio and 46 cells. The high number of cells means the ribs are positioned closer together, creating ultra smooth surfaces with reduced drag and maintaining a clean profile, resulting in superior flight efficiency.
    • Mid-High Aspect Ratio and New Planform – The aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance.
    • Optimized Leading Edge Air Intakes – Newly designed intake valves are precisely positioned along the LE on the upper and lower surfaces. This leads to a stability increase and a more solid kite. The inflation is now easier and safer as the kite rapidly inflates from the center to the wingtips.
    • Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
    • Internal Straps – Internal span-wise straps distribute load across the sail evenly and effectively, while also maintaining a cohesive internal balance controlling the high aspect ratio.
    • Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification that we use on our Snowkite range. The lines are thicker and stiffer compared to the R1’s high performance Kevlar line, and the sheath makes them less prone to damage.
    • Velcro and Water Out Channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean and dry your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
    • High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics.

     

     

    Ozone Chrono Ultralight V2 Race Kite Construction

     

    • High performance light weight canopy material
    • Leading Edge profile plastic batten reinforcements
    • Internal reinforcements and strapping improve durability and load distribution
    • Mesh protected inflation valves for fast inflation and no deflation
    • Double pulley speed-system, utilizing the latest high spec low friction Ronstan Orbit pulleys
    • Color coded and numbered fool proof line connectors
    • Velcro openings on last tip cell for easy wash out of debris and water
    • Water proof deflation zipper on top center cell for easy and fast deflation

     

     

    Wind & Bar Size

     

     

    Ozone Chrono Ultralight V2 Race Kite Colors

     

    Blue/White - Orange/White Please Specify Color when Ordering

     

     

     

    Learn More
  10. Kite Line HQ Scout 3

    HQ Scout 3

    Price From: $399.00

    The newly designed HQ Scout 3 delivers a high quality but affordable package for the entry into the world of traction kiting. The flying characteristics of the HQ Scout 3 are uncompromisingly focused to the needs of kite schools and pilots seeking for a quick experience of success with a kite on a bar.

     

     

    Performance and turning speed were significantly improved. The HQ Scout 3 guarantees you always will be safe out on your board or skis. This kite provides loads of easy handling fun for beginners and advanced pilots alike.

     

     

    HQ Scout 3 Characteristics

     

     

    HQ Scout 3 Useability

     

     

    HQ Scout 3 Technichal Info

     

     

    HQ Scout 3 Size

     

    3.0m - 4.0m - 5.0m

     

    Learn More
  11. Kite Line HQ Montana 9 Snowkite

    HQ Montana 9 Snowkite w/Bar & Lines

    Price From: $1,299.00

    HQ Montana 9 Snowkite 

     

    Read more on what HS says about the HQ Montana 9 Snowkite

     

    With the new HQ Montana 9 Snowkite, the most versatile kite on the market will be released. A new shape and air intake design increases internal pressure, making the HQ Montana 9 Snowkite extremely stable for hard use in the backcountry or aggressive freestyle moves. Tight turns with loads of power will pull you up every peak, while the linear depower gives you confidence to react to changing conditions.

     

     

    The HQ Montana 9 Snowkite offers all you need for sick freestyle moves: explosive lift and enough pop for going unhooked. The all new HQ Montana 9 Snowkite is built with light weight 30D fabric and provides super direct handling while offering maximum rider comfort. This kite can be used by beginners and is not only intended for pro´s. 

     

     

    HQ Montana 9 Snowkite Performance

     

     

    HQ Montana 9 Snowkite  Technical

     

     

    Learn More
  12. Kite Line HQ Apex 5 Snowkite

    HQ Apex 5 Snowkite w/Bar & Lines

    Price From: $749.00

    HQ Apex 5 Snowkite

     

    Read more on what HQ says about the HQ Apex 5 Snowkite

     

    When you can trust your HQ Apex 5 Snowkite 100% your skills progress to where you can climb the steepest mountains. The HQ Apex 5 Snowkite is your new partner to achieve this goal. You can count on the advanced and easier handling in all situations. Improved control and progressive flying characteristics make the HQ Apex 5 Snowkite a great choice for backcountry riding or your challenging entry into the world of powerkiting.

     

     

    HQ Apex 5 Snowkite Features

     

    • Improved control in critical situations
    • Extremely stable, high depower
    • Flying lines pre-attached
    • Power on demand
    • Extremely easy to fly

     

     

    HQ Apex 5 Snowkite Performance

     

     

    HQ Apex 5 Snowkite Technical

     

     

    Learn More
  13. How to Snowkite

    How to Snowkite

    $39.95

     

    How to Snowkite

    Volume One, Instructional Snowkiting DVD
    by Morten Gjerstad

    Who better to make a great new (and sorely needed) snowkiting instructional video than the maker of the amazing snowkite DVDs like Entropy and Something Stronger - Morten Gjerstad. He is not only an accomplished filmmaker (using all high-definition footage) but also has access to the top riders in the world who are on the cutting edge of what is happening in snowkiting.

    This is 2 hours of the most thorough introduction to snowkiting you can imagine. There are chapters on terminology, equipment, location and conditions, kite flying basics, using foil kites, using tube kites (each kite chapter includes information on setup, safety systems, launching and landing, relaunching, and even packing), riding basics (like edging, turning, and going upwind), back country riding, expedition kiting, kite repair, and basic jumping. This is definitely the complete course to becoming a safe and confident snowkiter. When volume 2 is released it will take off from the basic jump and go into all the trick types of jumps and many other specialized advanced snowkiting skills.

    How to Snowkite, Volume One - $34.95

    Learn More
  14. Kite Line Flysurfer Speed5 Kite

    Flysurfer Speed5 Kite (Kite Only)

    Price From: $1,349.00

    Flysurfer Speed5 Kite

     

    Read more on what Flysurfer says about the Flysurfer Speed5 Kite

     

    The Flysurfer Speed5 Kite combines extrovert design with maximum functionality. As an excellent all-rounder, this kite convinces by faster and direct turning speed, intoxicating hang-time and outstanding performance. Unique versatility that inspires in every kite discipline and all skill levels.

     

     

    FLYSURFER focused during the development of the new SPEED-line on functionality and product value. This amazing allrounder is known for its great fun-factor in light wind and intoxicating hang-time. The new generation is faithful to its strengths and also convinces by its high stability throughout the windrange, light steering and easy relaunch. The optimized turning as well as the large depower make the Flysurfer Speed5 Kite very well controlled and therefore very safe, which also underlines its enormous wide range of use.

     

     

    The sophisticated newly engineered design in combination with the robust DLX+ kite cloth a very harmonious bar feedback has been created that appeals to both beginners and professionals. On top of that, the reduced aerodynamic drag due to the Rigid Foil technology and the Double Cordwise Ballooning helped to further increase the lift of the kite. Rounding off the unbeatable overall package with FLYSURFER’s typical, small pack size and a fresh design for the sportiest Flysurfer Speed5 Kite ever – creating new dimensions.

     

     

    Flysurfer Speed5 Kite Features

     

     

    DLX+ Material

    DLX+ kite cloth offers increased strength of the base fabric and a new coating for reduced porosity. It is also tear-resistant and retains its material properties for longer. It is available in six fresh, eye catching colors.

     

    Strong Construction

    The new internal construction raises the quality of FLYSURFER foil kites to a new level. Double-stitched seams and extra taped ribs and straps provide even more stability.

     
     

    Rigid Foil Technology

    The Rigid Foil Technology is used to reduce wrinkles on the leading edge. This results in reduced aerodynamic drag and enhanced kite stability. As a result, the kite translates every gust of wind into propulsion without deforming the canopy. Overall, the Rigid Foils increases the kite’s stiffness and makes it more dynamic.

     

    Double Cordwise Ballooning

    Double Cordwise Ballooning is minimizing the creasing of the cells on the kite to an absolute minimum. With exactly calculated arc-shaped panel cuts, double-stitched and glued seams a perfectly smooth, high performance airfoil is created. This optimizes the aerodynamics, especially the glide ratio and the low end.

     

    Triple Depower Technology

    There are 3 ways the kite achieves its maximum depower: Reducing the angle of attack, profile change and reducing the projected area. This leads to a huge wind range and ideal handling.

     

    Automatic Drainage System

    The proven drainage system integrated in the whole trailing edge of the kite, with finally openings near the tips, about the size of a hand. They allow water and sand to be drained automatically, without influencing the performance of the kite.

     
     
     

    Full Depower Safety Upgrade-Kit (FDS)

    By default, the Flysurfer Speed5 Kite is equipped with a frontline safety (FLS). For fans and supporters of the 5th line safety system, we have developed a FDS upgrade-kit, which can be ordered in our online-shop or at a FLYSURFER dealer near you.

     

    LIROS Dyneema Lines

    FLYSURFER trusts in the lines of LIROS that are produced in Germany with a high quality standard. Thanks to their strong Dyneema core fibers, a reduced line diameter is possible while maintaining equal breaking strength.

     

     

    Flysurfer Speed5 Kite Colors

     

     

    Flysurfer Speed5 Kite Tech. Data

     

     

    Flysurfer Speed5 Kite Wind Range

     

     

     

     

    Learn More
  15. Kite Line Flysurfer Sonic2 Kite

    Flysurfer Sonic2 Kite (Kite Only)

    Price From: $1,749.00

    Flysurfer Sonic2 Kite

     

    Read more about what Flysurfer says about the Flysurfer Sonic2 Kite

     

    Airstyle, Hydrofoil, Race. The Flysurfer Sonic2 Kite embodies our vision of a modern, highly advanced racing wing. Each detail of the Flysurfer Sonic2 Kite is designed with performance in mind. The Flysurfer Sonic2 Kite is beautifully balanced and responsive turning, optimised lightweight construction and refined aerodynamics all come together to create a sublime riding experience. A proving ground for FLYSURFER Kiteboarding technology, the dedication to the kite-racing sport isn’t just for show. It’s a science. The racetrack has repeatedly been a laboratory for successful development of our products and innovations.

     

     

    Pushing the Flysurfer Sonic2 Kite to the limit reflects the spirit of the brand and the men and women who strive for victory. To strengthen our competitiveness and to lay the foundation for the success of our athletes, we are continuously investing in R&D. You benefit from the results of these long-term tests under extreme conditions. The Flysurfer Sonic2 Kites lightweight construction, includes a LOTUS cloth topsail for an even smoother airflow, as well as our proven DLX+ cloth for more control and responsive turning. The total rework on the airfoil improves the aerodynamic efficiency, which results in stunning speeds with improved angles on all courses. The Flysurfer Sonic2 Kite was also thoroughly tested with twintips and built specifically for extreme jumps with long hang-time to also make it one of the best Big Air products on the market.

     

     

    The Flysurfer Sonic2 Kites virtue of highest lift to drag ratio instantly shows the exceptional qualities that a foil kite with depower has to offer. Experience the fascinating balance of raw power, mad lift and outstanding hangtime from the get go. Aesthetic high-performance technology. Add a Flysurfer Control System your your kite package.

     

     

    Flysurfer Sonic2 Kite Sizes

     

    6 / 9 / 11 / 13 / 15 / 18

    Learn More
  16. Kite Line Flysurfer Sonic Race Kite

    Flysurfer Sonic Race Kite w/ProRace Bar & Lines

    Price From: $2,808.00

    Flysurfer Sonic Race Kite w/Pro Race Bar & Lines

     

    Read more about what Flysurfer says about the Flysurfer Sonic Race Kite

     

    The Flysurfer Sonic Race Kite instantly shows that we made no compromises in performance… get excited by exceptional efficiency – the race is on! At FLYSURFER Kiteboarding – the proving ground for kiteboarding technology – the dedication to the kite-racing sport isn’t just for show. It’s a science. Pushing the Flysurfer Sonic Race Kite to the limit reflects the spirit of the brand, and all of the men and women who strive for victory.

     

     

    To strengthen our competitiveness and to lay the foundation for the success of our athletes, we are continuously investing in a great racing team and in research and development of our highest performance wing. The Flysurfer Sonic Race Kite developer Benni Boelli supports our athletes during the pro tour season to continously improve the product. You directly benefit from years of great team work and our absolute passion for hydrofoil, snowkite and kitebuggy racing.

     

     

    The Flysurfer Sonic Race Kite lightweight construction is built upon our new X-Light fabric for maximum durability and highest stability. Our 3-Level Bridle Design and a total rework of the airfoil highly improves the aerodynamic efficiency; which results in stunning speeds with improved angles on all courses, and even better—almost unreal—lightwind abilities. Designed on short flying lines and supported by rigid construction and a new mixer which provides reliably-quick manouvering of the wing, the Flysurfer Sonic Race Kite shows its strength in gusty winds and let you fully focus on your riding to win the toughest races.

     

     

    Flysurfer Sonic Race Kite Features

     

    Hydrofoil, Race

     

    The Flysurfer Sonic Race Kite shows FLYSURFER’s full commitment to kite racing. We are continually improving performance with each new model – striving for the highest speeds and the best angles on the course. The kite is highly efficient, powerful and aggressive – perfect for the fastest riders.

     

    X-Light Fabric

    At FLYSURFER Kiteboarding, we made weight reduction one of the important development goals for the Flysurfer Sonic Race Kite. The new X-Light Fabric has the best qualities for maximum performance and impressive longevity. The incredibly lightweight (32g / m²) double-ripstop material is highly tear-resistant as well as airtight, and provides an extremely smooth sail. The X-Light cloth underlines our philosophy of sustainability. You can trust the X-Light Fabric – built into your SONIC Race – to help you reach your best performance every season.

     

    3-Level Bridle Design (A, B, Z)

    The next generation in race-kite development. The 3-level bridle design dramatically reduces the number of lines and the associated resistance by an incredible 30%. The fully-spliced, uncoated Dyneema SK99 lines are the perfect choice for this application. The result: the best angles at maximum speed on every course. The Flysurfer Sonic Race Kite cuts cleanly through the air.

     

    See more on Flysurfer Pro Race Bar

     

    Modern Competition Technology

    Our FLYSURFER Kiteboarding athletes worked hard with the R&D race specialist Benni Bölli on the fine tuning of the kites. The sleek Flysurfer Sonic Race Kite is constructed using the shortest flying lines (from 12-17m, depending on the size), to allow for the fastest maneuvers and kiting at the lowest angles. The highlight is the mixer, which can be adjusted by means of a new splice system. Due to the high aspect ratio of the kite, it is difficult to uniformly adjust the angle of attack. But the new mixer is a perfect match for the 3-Level Bridle Design, and changes the ratio evenly from the middle of the kite down to the tips while braking / depowering. The system transfers power to the kite by means of three deflection pulleys – A1 with 8:1, B1 with 4:1 and B2 with 2:1 – creating a steady pathway that provides uncompromised maximum performance.

     

    High-Performance Construction

    The Flysurfer Sonic Race Kite is imbued with our most cutting-edge technologies taken from both the kite and paragliding development. Proven features such as Cordwise Ballooning, Rigid Foil Technology, and Sharp Mini Ribs are integral parts of the design. The heart of the Flysurfer Sonic Race Kite is in its lightweight construction: the arc curve on the B-level allows the surface to be supported along the entire span by means of fewer lines while at the same time keeping the load evenly distributed. The X-Light fabric makes the construction stiffer and allows for an incredible maximum speed with full control in the most difficult conditions. The Flysurfer Sonic Race Kite is excluded from our 12-Month Free-Repair Warranty.

     

    Automatic Drainage System

    The drainage system is integrated in the entire trailing edge of the kite and terminates with 4cm long openings near the tips. This drainage system allows water and sand to be drained automatically, without affecting the performance of the kite. This feature allows you to get back in the race quickly after a crash.

     

    IKA registered

    Take part in every official IKA – Formula Kite race event. We have registered the Flysurfer Sonic Race Kite for every rider. This means that your Flysurfer Sonic Race Kite is already approved for every IKA race and you DO NOT need to apply for an additional IKA plaque ID. This was changed for the 2017 racing season.

     

     

    Learn More
  17. Kite Line Flysurfer Sonic Race Kite

    Flysurfer Sonic Race Kite (Kite Only)

    Price From: $2,299.00

    Flysurfer Sonic Race Kite

     

    Read more about what Flysurfer says about the Flysurfer Sonic Race Kite

     

    The Flysurfer Sonic Race Kite instantly shows that we made no compromises in performance… get excited by exceptional efficiency – the race is on! At FLYSURFER Kiteboarding – the proving ground for kiteboarding technology – the dedication to the kite-racing sport isn’t just for show. It’s a science. Pushing the Flysurfer Sonic Race Kite to the limit reflects the spirit of the brand, and all of the men and women who strive for victory.

     

     

    To strengthen our competitiveness and to lay the foundation for the success of our athletes, we are continuously investing in a great racing team and in research and development of our highest performance wing. The Flysurfer Sonic Race Kite developer Benni Boelli supports our athletes during the pro tour season to continously improve the product. You directly benefit from years of great team work and our absolute passion for hydrofoil, snowkite and kitebuggy racing.

     

     

    The Flysurfer Sonic Race Kite lightweight construction is built upon our new X-Light fabric for maximum durability and highest stability. Our 3-Level Bridle Design and a total rework of the airfoil highly improves the aerodynamic efficiency; which results in stunning speeds with improved angles on all courses, and even better—almost unreal—lightwind abilities. Designed on short flying lines and supported by rigid construction and a new mixer which provides reliably-quick manouvering of the wing, the Flysurfer Sonic Race Kite shows its strength in gusty winds and let you fully focus on your riding to win the toughest races.

     

     

    Flysurfer Sonic Race Kite Features

     

    Hydrofoil, Race

     

    The Flysurfer Sonic Race Kite shows FLYSURFER’s full commitment to kite racing. We are continually improving performance with each new model – striving for the highest speeds and the best angles on the course. The kite is highly efficient, powerful and aggressive – perfect for the fastest riders.

     

    X-Light Fabric

    At FLYSURFER Kiteboarding, we made weight reduction one of the important development goals for the Flysurfer Sonic Race Kite. The new X-Light Fabric has the best qualities for maximum performance and impressive longevity. The incredibly lightweight (32g / m²) double-ripstop material is highly tear-resistant as well as airtight, and provides an extremely smooth sail. The X-Light cloth underlines our philosophy of sustainability. You can trust the X-Light Fabric – built into your SONIC Race – to help you reach your best performance every season.

     

    3-Level Bridle Design (A, B, Z)

    The next generation in race-kite development. The 3-level bridle design dramatically reduces the number of lines and the associated resistance by an incredible 30%. The fully-spliced, uncoated Dyneema SK99 lines are the perfect choice for this application. The result: the best angles at maximum speed on every course. The Flysurfer Sonic Race Kite cuts cleanly through the air.

     

     

    Modern Competition Technology

    Our FLYSURFER Kiteboarding athletes worked hard with the R&D race specialist Benni Bölli on the fine tuning of the kites. The sleek Flysurfer Sonic Race Kite is constructed using the shortest flying lines (from 12-17m, depending on the size), to allow for the fastest maneuvers and kiting at the lowest angles. The highlight is the mixer, which can be adjusted by means of a new splice system. Due to the high aspect ratio of the kite, it is difficult to uniformly adjust the angle of attack. But the new mixer is a perfect match for the 3-Level Bridle Design, and changes the ratio evenly from the middle of the kite down to the tips while braking / depowering. The system transfers power to the kite by means of three deflection pulleys – A1 with 8:1, B1 with 4:1 and B2 with 2:1 – creating a steady pathway that provides uncompromised maximum performance.

     

    High-Performance Construction

    The Flysurfer Sonic Race Kite is imbued with our most cutting-edge technologies taken from both the kite and paragliding development. Proven features such as Cordwise Ballooning, Rigid Foil Technology, and Sharp Mini Ribs are integral parts of the design. The heart of the Flysurfer Sonic Race Kite is in its lightweight construction: the arc curve on the B-level allows the surface to be supported along the entire span by means of fewer lines while at the same time keeping the load evenly distributed. The X-Light fabric makes the construction stiffer and allows for an incredible maximum speed with full control in the most difficult conditions. The Flysurfer Sonic Race Kite is excluded from our 12-Month Free-Repair Warranty.

     

    Automatic Drainage System

    The drainage system is integrated in the entire trailing edge of the kite and terminates with 4cm long openings near the tips. This drainage system allows water and sand to be drained automatically, without affecting the performance of the kite. This feature allows you to get back in the race quickly after a crash.

     

    IKA registered

    Take part in every official IKA – Formula Kite race event. We have registered the Flysurfer Sonic Race Kite for every rider. This means that your Flysurfer Sonic Race Kite is already approved for every IKA race and you DO NOT need to apply for an additional IKA plaque ID. This was changed for the 2017 racing season.

     

     

    Learn More
  • Kite Line Flysurfer Infinity 3.0 Race Bar Pro

    Flysurfer Infinity 3.0 Race Bar Pro

    $549.00

    Flysurfer Infinity 3.0 Race Bar Pro

     

    Read more on what Flysurfer says about the Flysurfer Infinity 3.0 Race Bar Pro

     

    We know that in competition every small advantage counts. The Flysurfer Infinity 3.0 Race Bar Pro offers you a few trump cards: thinner low-drag flying line construction, a 4:1 Pulley Clam Cleat Adjuster, and optimized line guidance through the Double-V-Shaped Eylet

     

     

    Any rider who is serious about competing and wants to get the maximum performance from the kite should look to the Flysurfer Infinity 3.0 Race Bar Pro. This bar has numerous features to aid you on your way to victory. Best grip, reliable safety function and several ways to customize the Bar setup leave the racer nothing to be desired. The Quick Release 2.0 was certificated with the french standard (AFNOR) and is therefore a Quality and Safety feature of the Flysurfer Infinity 3.0 Race Bar Pro. The 4:1 Pulley Clam Cleat Adjuster enables quick and accurate response to changing circumstances or specific competition situations.

     

     

    The reduced diameter Race back-lines, the short Frontline Safety, and optimized line guidance through the Double-V-Shaped Eylet provide a maximum reduction of air resistance—and possibly the decisive advantage in your race. In addition, the bar width and the steering lines can be optimized to the needs of the rider. Flysurfer Infinity 3.0 Race Bar Pro is excluded from the 12-month Free-Repair Guarantee by FLYSURFER. This Bar setup is intended for Racing only and is not suitable for jumping! 

     

     

    Flysurfer Infinity 3.0 Race Bar Pro Tech. Data

     

    Quick Release 2.0

    As expected, the Quick Release 2.0 (QR 2.0) has fullfilled the requirements for the French safety standard (AFNOR). No matter the circumstances, the QR 2.0 is always reliable and lets you get yourself out of a dangerous situation immediately and by using only one handle. It’s super smooth and can be conveniently unscrewed manually.

    Ergonomic Grip Design

    The slim, lightweight Control Bar features a fresh-green signal color on the right-hand side and is available in two lengths – 50 and 60cm. The abrasion-resistant, ergonomic EVA grip is extremely comfortable for the hand and assures solid control even in cold or wet conditions.

    Double-V-Shaped Eyelet

    The optimized and reduced-friction Double-V-Shaped Eylet ensures an easy and direct steering response. The powering up and depower function works even when when you turn the Bar

    Clam-Cleat Race Adjuster

    The smooth-running 4:1 Pulley Clamcleat Race Adjuster stands apart with its simple and precise adjustment possibilities (with a 55cm-long depower distance).

    Optimized Air Drag Race Flying Line System

    For the Race flying lines (length 21m), we have worked to find an optimal balance between diameter reduction and breaking load (front 1.45mm / 300kg – Back 0.8mm / 160kg). Additionally, we have conciously included a very short Frontline Safety (FLS), which represents an extension of a front line. This reduces the air resistance of the entire Race flying-line construction, which has the direct advantage of allowing the kit to reach higher speeds. Finally, the line guide is optimized by the double-V-Shaped eyelet in the Bar handle. Optional Race flying-line extensions in 2m or 4m are available in the FLYSURFER Webshop. For years we have put our trust in our parter LIROS for supplying high-quality lines.

    Tuning Options

    At the integrated Winder you can change the bar width by up to 5 cm, which is recommended when using a bar for many kite sizes. Additionally, the control lines can be adjusted below the floaters, meaning you can counteract the effects of shortened steering lines and tendency to backstall. These features allow the bar setup to be individually adjusted to the rider.

     

    Learn More
  • Kite Line Flysurfer Infinity 3.0 Airstyle Bar

    Flysurfer Infinity 3.0 Airstyle Bar

    Price From: $459.00

    Flysurfer Infinity 3.0 Airstyle Bar

     

    Read more about what Flysurfer says about the Flysurfer Infinity 3.0 Airstyle Bar

     

    Best grip, robust security, high-quality lines, endless rotations and multiple possibilites for individual adjustments. The Flysurfer Infinity 3.0 Airstyle Bar is the control option from Flysurfer for everyone – from beginners to pros. The Flysurfer Infinity 3.0 Airstyle Bar is streamlined, simple, and at the same time impressive in terms of functionality. Anyone who likes big air or who occasionally kites in overpowered conditions should get their hands on the INFINITY 3.0 Airstyle BAR.

     

     

    The Flysurfer Infinity 3.0 Airstyle Bar delivers pure enjoyment in every jump. With the best grip, reliable safety function, high quality lines, endless rotations and several ways to customize the Bar setup; it fully satisfies the needs of Freeriders, Airstylers and fans of Big Air. The Quick Release 3.0 was certificated with the french standard (AFNOR) and is therefore a quality and safety feature of the INFINITY 3.0 Airstyle BAR.

     

     

    The Pull-Pull Adjuster makes presetting the depower possible with one handle. The integrated swivel function untwists the lines smoothly and flawlessly — even after many rotations — by simply powering up the Bar. In addition, the Bar width and the steering lines can be adjusted and optimized to meet the needs of the rider.

     

     

    Flysurfer Infinity 3.0 Airstyle Bar Tech. Data

     

     

    Quick Release 3.0

    The Quick Release 3.0 (QR 3.0) is the core of the bar. It not only meets the French standard (AFNOR) in terms of safety and trigger forces, it is also extremely robust, compact, lightweight and of course reliable. A flexible, unbreakable Chicken Dick and a new ergonomic handle allow a quick and easy release of the kite in an emergency situation.

     

    Infinite Rotations

    The smooth, integrated swivel function of the Quick Release 3.0 provides an automatic untwisting of the flying lines when powering up the bar. The safety system remains fully functional even after numerous rotations in one direction.

     
     

    Ergonomic Grip Design

    The slim, lightweight Control Bar features a fresh-green signal color on the right-hand side and is available in two lengths – 50 and 60cm. The abrasion-resistant, ergonomic EVA grip is extremely comfortable for the hand and assures solid control even in cold or wet conditions.

     

    Double-V-Shaped Eyelet

    The optimized and reduced-friction Double-V-Shaped Eylet ensures an easy and direct steering response. The powering up and depower functions work even when when you turn the Bar.

     Pull-Pull Adjuster

    The Pull-Pull Adjuster allows for the adjustment of the ratio of the lines (front to control lines) with a short handle, even when the kite in the air. This allows the user to regulate the depower function optimally and quickly. Below the Adjuster is a simple sliding stopper ball. We recommend the use of the stopper ball to advanced riders and ambitious airstylers when kiting in constant winds.

    Tuning Options

    At the integrated Winder you can change the bar width by up to 5 cm, which is recommended when using a bar for many kite sizes. Additionally, the control lines can be adjusted below the floaters, meaning you can counteract the effects of shortened steering lines and tendency to backstall. These features allow the bar setup to be individually adjusted to the rider.

     
     

    Low Drag Flying Lines

    The low-drag flying lines (length: 21m) have an impressively-low air resistance (diameter: 1.45mm Front / Back 1,2mm) and a very high breaking load (300kg Front / Back 200kg). For years we have put our trust in our parter LIROS for supplying high-quality lines. The 60cm Airstlye Bar setup is additionally equipped with 6m extensions of the flying lines. Thanks to this feature, the low end gets even more effective when using one of our larger kites.

     

    Frontline-Safety (FLS)

    It is our standard at FLYSURFER to use the system of the Frontline Safety – this additional FLS end line is incorporated approximately in the middle of a front line – the exact details are always dependent on the kite line and the kite size. However, some FLYSURFER kite lines use a different safey system. The VIRON, for example, has a Raff-Safety. For lovers of the 5th line, a FDS conversion kit (full depower system) is available in most product lines.

     

    /p>

    Learn More
  • Kite Line 2017 Ozone Summit V4 Snowkite

    2017 Ozone Summit V4 Snowkite Complete

    Price From:

    $1,435.00

    Special Price: $1,148.00

    2017 Ozone Summit V4 Snowkite

     

    Read more on what Ozone says about the 2017 Ozone Summit V4 Snowkite

     

     

    The 2017 Ozone Summit V4 Snowkite continues to define high performance and versatility for dedicated Snowkite riders who are looking for high speed mountain climbing or blasting through the powder with a fast turning kite. The fourth version has directly benefited from our R1 V2 race development knowledge, allowing us to improve performance, handling and stability. The 2017 Ozone Summit V4 Snowkite is perfect for progressive riders – it will allow the adventurous to push the boundaries of the snowy backcountry. The 2017 Ozone Summit V4 Snowkite has so much potential due to its amazing power generation in light winds but also big de-power in strong winds. Combine that with fast direct handling and you have the ultimate open-cell foil Snowkite.

     

     

    Each aspect of the 2017 Ozone Summit V4 Snowkite has been calculated using the latest development techniques to produce a kite that pushes the limit of design. With our new software and our years of experience we have put together a unique combination of aspect ratio, cell width, profile and sail tension. The 2017 Ozone Summit V4 Snowkite now boasts the same internal load distribution technology as the R1 V2. The new diagonal ribs and internal straps connect to each other creating a structural frame, which reduces load going into the upper and lower surfaces. This new technology brings further gains in stability and handling to the 2017 Ozone Summit V4 Snowkite. The airfoil section has also been recalculated and smoothed to improve the kites speed and feeling. New flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening - the battens enhance structure of the openings, this means quicker and easier inflation.

     

    2017 Ozone Summit V4 Snowkite Features

     

    • For dedicated and experienced snowkiters.
    • High aspect and high performance profile.
    • Tight powerful turns for mountain climbing.
    • Revolutionary Internal Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
    • Designed with OZ-CAD - The FUTURE is NOW. All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • Exceptional Ozone Factory construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Internal Re-Ride Release System - The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
    • Double pulley Speed System - Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
    • Leading Edge Opening Battens - Flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening. The battens enhance structure of the openings, this means quicker and easier inflation.
    • Internal Diagonals and Straps - Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance that helps control the kites top and bottom surfaces to maintain the designed shape and profile without being distorted from indirect tension or loads.
    • High quality Oz Tex 40D - We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
    • Sheathed bridle lines - High quality, low stretch sheathed bridle lines for maximum strength and performance
    • Blow out valves - Under surface Blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
    • Dirt-out wing tips - The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
    • Fool proof line connectors - Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.
    • Comparable feeling throughout the size range - We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

     

    2017 Ozone Summit V4 Snowkite Bar

     

     

    2017 Ozone Summit V4 Snowkite Colors

     

    Please Specify Color when Ordering

     

    2017 Ozone Summit V4 Snowkite Wind Range

     

     

     

    The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

    Learn More
  • Loading...

    Items per page 5 10 15 20 25 All

    // 29 Items //

    Snow kiting is becoming more and more popular, especially with the increased popularity of kitesurfing. Snow kiting is great because you can travel up hill, down hill, and anywhere you please, just watch out for those trees! Snow kiters have been known to travel very long distances, and some freestylers push the boundaries seeking big air, big tricks, and bigger glory. Whether you are new to the sport of snow kiting, or a seasoned kiter, Kite-Line as all of the latest and greatest gear from the top brands in the industry for you to get started or get back in the air. Check out our snow kiting kites, boards, accessories, and DVDs and take to the skies!