Navigation

Search

Shop By

Currently Shopping by:

  1. Manufacturer: Ozone Remove This Item
Category
  1. Snow Kites (10)
  2. Accessories (1)
Price
  1. $0.00 - $999.99 (1)
  2. $1,000.00 - $1,999.99 (7)
  3. $2,000.00 and above (3)
Compare Products
My Cart

You have no items in your shopping cart.

Snow Kiting

When you want to take your wind walking into the polar sphere, Kite-Line has you covered with all the best snow kiting products including kites, boards, harnesses, and great gear by Flysurfer, HQ, Nobile, Ozone, and other top brands. Find everything you need to get started with snow kiting, or upgrade your set up right here at Kite-Line.

Items per page 5 10 15 20 25 All

// 11 Items //

  1. Kite Line 2017 Ozone Edge V9 Kite Freeride Complete

    2017 Ozone Edge V9 Freeride Complete

    Price From: $1,810.00

    2017 Ozone Edge V9 Kite Complete with Ozone Contact Water Control System

     

    Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

     

    ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

     

     

    We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

     

     

    On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

     

     

    2017 Ozone Edge V9 Kite Highlights

     

    • ​High adrenaline free ride machine
    • Massive air and hang time
    • Warp speed riding
    • Highest performance LEI race kite

     

    2017 Ozone Edge V9 Kite Features

     

    The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

     

    Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

     

    The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

     

    Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

     

    Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

     

    Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

     

    The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

     

    Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

     

    Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

     

    Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

     

    NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

     

    A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

     

    Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

     

    Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

     

    What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

     

    Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

     

    The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

     

    2017 Ozone Edge V9 Kite Colors

     

    Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

    Please Specify Color when Ordering

     

    2017 Ozone Edge V9 Kite Range of Use

     

     

    2017 Ozone Edge V9 Kite Wind Range & Bar Size

     

     

    2017 Ozone Edge V9 Kite Sizes

     

    6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

    Learn More
  2. Kite Line 2017 Ozone Edge V9 Kite

    2017 Ozone Edge V9 Kite (Kite Only)

    Price From: $1,290.00

    2017 Ozone Edge V9 Kite

     

    Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

     

    ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

     

     

    We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

     

     

    On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

     

     

    2017 Ozone Edge V9 Kite Highlights

     

    • ​High adrenaline free ride machine
    • Massive air and hang time
    • Warp speed riding
    • Highest performance LEI race kite

     

    2017 Ozone Edge V9 Kite Features

     

    The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

     

    Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

     

    The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

     

    Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

     

    Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

     

    Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

     

    The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

     

    Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

     

    Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

     

    Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

     

    NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

     

    A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

     

    Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

     

    Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

     

    What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

     

    Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

     

    The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

     

    2017 Ozone Edge V9 Kite Colors

     

    Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

    Please Specify Color when Ordering

     

    2017 Ozone Edge V9 Kite Range of Use

     

     

    2017 Ozone Edge V9 Kite Wind Range & Bar Size

     

     

    2017 Ozone Edge V9 Kite Sizes

     

    6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

    Learn More
  3. Kite Line 2017 Ozone Edge V9 Kite

    2017 Ozone Edge V9 Kite w/Race Control System

    Price From: $1,860.00

    2017 Ozone Edge V9 Kite Complete with Ozone Race Control System

     

    Reaad more about what Ozone says about the 2017 Ozone Edge V9 Kite

     

    ACTION PACKED FREE RIDE, BOOSTING TO THE MOON, AIR STYLE, SPEED, HYDROFOIL OR TWIN-TIP RACING - THE EDGE V9 DELIVERS HIGH PERFORMANCE THAT IS INCREDIBLY ADDICTIVE. The 2017 Ozone Edge V9 Kite has a unique pedigree, well known to pack a serious punch! The 2017 Ozone Edge V9 Kite takes it to the next level - an explosive high adrenaline freeride machine that will leave you in withdrawal after every session. True addiction comes naturally with the 2017 Ozone Edge V9 Kite, the heavy hitter with an honest high! The design brief for the 2017 Ozone Edge V9 Kite was to radically improve free ride and big air potential, while maintaining its multiple World Championship winning speed and race performance. 

     

     

    We have completely re-worked the bar feeling, with the balance between front and rear line pressure optimised for feeling and improved pitch control. Riding the 2017 Ozone Edge V9 Kite you can easily sense where the kite is at any time, the entire bar throw range offers a progressive feedback feel making it turn faster and easier to time the take off for going massive. Continuous curve struts means we have higher levels of control over sail tension and reduced sail luff through the angle of attack range, giving a smoother ride with less bar bounce. The airfoil section of the 2017 Ozone Edge V9 Kite has also been slightly modified for increased hang time, a small refinement but very noticeable in the air. The re-shaped wing tip section combined with re-positioned bridle attachment points increases drive in the turn and enhances load distribution for the leading edge. This directly translates to all-round high performance given any style of riding, all while going fast!

     

     

    On any type of race or speed course the 2017 Ozone Edge V9 Kite has a serious performance advantage – warp speed riding at amazing angles will have you clear ahead of the competition. Our unique low-drag pulley-less bridle system using high performance Kevlar line is 50% thinner than our standard bridle line, resulting in a vast reduction in parasitic drag increasing acceleration and range. Combined with the Race Control System and Race Flying Lines the 2017 Ozone Edge V9 Kite truly is the leading performance LEI package. On the SNOW! Yes that’s right, the 2017 Ozone Edge V9 Kite is possibly the best inflatable kite in existence for taking advantage of the cold white stuff. Its got speed, power, and the best attribute is how easily you can get air - all you have to do is gain speed, edge hard and send it!

     

     

    2017 Ozone Edge V9 Kite Highlights

     

    • ​High adrenaline free ride machine
    • Massive air and hang time
    • Warp speed riding
    • Highest performance LEI race kite

     

    2017 Ozone Edge V9 Kite Features

     

    The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

     

    Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics. We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

     

    The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

     

    Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

     

    Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

     

    Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

     

    The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

     

    Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

     

    Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

     

    Weltklasse Qualitätsfertigung in unserer eigenen Fabrik unter Verwendung bester Materialien und stetiger manueller Qualitätskontrolle nach jedem Produktionsschritt. Die Ozone Fabrik fertigt ebenfalls unserer Gleitschirme und Speedglider Range; die gleiche Prozess der Qualitätskontrolle wird auf all unsere produkte angewandt.

     

    NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

     

    A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

     

    Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

     

    Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

     

    What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

     

    Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

     

    The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

     

    2017 Ozone Edge V9 Kite Colors

     

    Black / Orange / Red / White / Yellow / Blue / Green / Turquoise

    Please Specify Color when Ordering

     

    2017 Ozone Edge V9 Kite Range of Use

     

     

    2017 Ozone Edge V9 Kite Wind Range & Bar Size

     

     

    2017 Ozone Edge V9 Kite Sizes

     

    6 - 6 - 7 - 8 - 9 - 10 - 11 - 13 - 15 - 17 - 19m

    Learn More
  4. Kite Line 2018 Ozone Blizzard Sub Zero V1 Kite

    2018 Ozone Blizzard Sub Zero V1 Kite Complete

    Price From: $1,560.00

    2018 Ozone Blizzard Sub Zero V1 Kite

     

    5m - 7m - 9m - 11m - 13m 

     

     

    Read more on what Ozone says about the 2018 Ozone Blizzard Sub Zero V1 Kite

     

    Whether your passion is Freeride or Backcountry missions the new 2018 Ozone Blizzard Sub Zero V1 Kite has you covered! The 2018 Ozone Blizzard Sub Zero V1 Kite is a completely new design dedicated purely for Snowkiting. Together with our latest design understanding the 2018 Ozone Blizzard Sub Zero V1 Kite combines our favorite characteristics of the legendary Frenzy and Summit models into one allround performance open cell foil kite.

     

     

    Freeriders will feel at home with the 2018 Ozone Blizzard Sub Zero V1 Kite. Our design team has refined the bridle configuration to offer an amazing feeling on the bar. The 2018 Ozone Blizzard Sub Zero V1 Kite's new planform and profiles offer ultimate stability in gusty winds and optimized strap positions distribute load evenly throughout the sail, this all translates to smooth, predictable power delivery and snappy handling.

     

     

    The 2018 Ozone Blizzard Sub Zero V1 Kite allows the adventurous to push the boundaries of the snowy backcountry. The 2018 Ozone Blizzard Sub Zero V1 Kite has incredible potential due to its fast direct handling and amazing power generation in light winds, but also big de-power in strong winds. The 2018 Ozone Blizzard Sub Zero V1 Kite’s enhanced stability makes difficult backcountry rides and mountain climbing more accessible and enjoyable. Combine that with our revolutionary Internal Re-Ride Release System and and the 2018 Ozone Blizzard Sub Zero V1 Kite becomes the ultimate backcountry Snowkite!

     

     

    2018 Ozone Blizzard Sub Zero V1 Kite Features

     

    • Freeride and backcountry machine
    • Latest foil kite and paraglider design technology
    • Industry leading Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
    • Designed with OZ-CAD - The FUTURE is NOW. All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • Exceptional Ozone Factory construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Leading Edge Opening Battens - Flexible lightweight plastic battens are precisely positioned at each leading edge cell opening. The battens enhance structure of the openings, this means quicker and easier inflation.
    • Internal Diagonals and Straps - Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance that helps control the kites top and bottom surfaces to maintain the designed shape and profile without being distorted from indirect tension or loads.
    • Internal Re-Ride Release System - The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
    • Double pulley Speed System - Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
    • High quality Oz Tex 40D - We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
    • Sheathed bridle lines - High quality, low stretch sheathed bridle lines for maximum strength and performance
    • Blow out valves - Under surface blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
    • Dirt-out wing tips - The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
    • Fool proof line connectors - Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.
    • Comparable feeling throughout the size range - We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

     

    2018 Ozone Blizzard Sub Zero V1 Kite Contact-Snow Control System

     

    2018 Ozone Blizzard Sub Zero V1 Kite Wind Rabge / Bar Size

     

     

     

    2018 Ozone Blizzard Sub Zero V1 Kite Colors

     

    Please Specify Color when Ordering. Blue - Green - Orange

     

    2018 Ozone Blizzard Sub Zero V1 Kites Internal Re-Ride System

     

     

    The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. The goal was to have a release system that once activated the kite can easily be re-launched without having to untangle or clear any lines. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you're ready again. Another big advantage of our Internal Re-Ride Release System is the land and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or over the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Release System. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the Internal Re-Ride Release System cannot be upgraded to older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

    Learn More
  5. Kite Line 2018 Ozone Blizzard V1 Ultralight Kite

    2018 Ozone Blizzard V1 Ultralight Kite Complete

    Price From: $1,700.00

    2018 Ozone Blizzard V1 Ultralight Kite

     

    Read more on what Ozone says about the 2018 Ozone Blizzard V1 Ultralight Kite

     

    Whether your passion is Freeride or Backcountry missions the new 2018 Ozone Blizzard V1 Ultralight Kite has you covered! The 2018 Ozone Blizzard V1 Ultralight Kite is a completely new design dedicated purely for Snowkiting. Together with our latest design understanding the 2018 Ozone Blizzard V1 Ultralight Kite combines our favorite characteristics of the legendary Frenzy and Summit models into one allround performance open cell foil kite.

     

     

    Freeriders will feel at home with the 2018 Ozone Blizzard V1 Ultralight Kite. Our design team has refined the bridle configuration to offer an amazing feeling on the bar. The new 2018 Ozone Blizzard V1 Ultralight Kites planform and profiles offer ultimate stability in gusty winds and optimized strap positions distribute load evenly throughout the sail, this all translates to smooth, predictable power delivery and snappy handling.

     

     

    The 2018 Ozone Blizzard V1 Ultralight Kite allows the adventurous to push the boundaries of the snowy backcountry. It has incredible potential due to its fast direct handling and amazing power generation in light winds, but also big de-power in strong winds. The 2018 Ozone Blizzard V1 Ultralight Kites enhanced stability makes difficult backcountry rides and mountain climbing more accessible and enjoyable. Combine that with our revolutionary Internal Re-Ride Release System and you have the ultimate backcountry Snowkite.

     

     

    2018 Ozone Blizzard V1 Ultralight Kite Features

     

    • Freeride and backcountry machine
    • Latest foil kite and paraglider design technology
    • Industry leading Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
    • Designed with OZ-CAD - The FUTURE is NOW. All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • Exceptional Ozone Factory construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Leading Edge Opening Battens - Flexible lightweight plastic battens are precisely positioned at each leading edge cell opening. The battens enhance structure of the openings, this means quicker and easier inflation.
    • Internal Diagonals and Straps - Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance that helps control the kites top and bottom surfaces to maintain the designed shape and profile without being distorted from indirect tension or loads.
    • Internal Re-Ride Release System - The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
    • Double pulley Speed System - Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
    • High quality Oz Tex 40D - We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
    • Sheathed bridle lines - High quality, low stretch sheathed bridle lines for maximum strength and performance
    • Blow out valves - Under surface blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
    • Dirt-out wing tips - The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
    • Fool proof line connectors - Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.
    • Comparable feeling throughout the size range - We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

     

     

    2018 Ozone Blizzard V1 Ultralight Kite Sizes

     

    5m - 7m - 9m - 11m - 13m 

     

    2018 Ozone Blizzard V1 Ultralight Kite Wind Range & Bar Size

     

     

     

     

    The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. The goal was to have a release system that once activated the kite can easily be re-launched without having to untangle or clear any lines. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you're ready again.


    Another big advantage of our Internal Re-Ride Release System is the land and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or over the bar horn. This makes landing and packing your kite safe and easy even in high winds.


    We thoroughly enjoyed developing and testing the Internal Re-Ride Release System. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user.


    Please note, the Internal Re-Ride Release System cannot be upgraded to older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

    Learn More
  6. Kite Line Ozone Chrono Kite

    2018 Ozone Chrono Kite (Kite Only)

    Price From: $2,100.00

    Ozone Chrono V3 Kite

     

     

    Read more on what Ozone says about the Ozone Chrono V3 Kite

     

    Born from the Chrono legacy and packed full of the latest technology, this all new Ozone Chrono Kite takes it to the next level. The Ozone Chrono V3 Kite is by far the most universal high level foil kite, you can expect outstanding performance across the board. Our Ozone Chrono V3 Kite design brief was to enhance every aspect of the V2. To do this we had to take the design to the next level incorporating features and understanding from the highest performance race kite on the planet, the R1 V2. It was a lofty goal but we believe we have made it happen. The Ozone Chrono V3 Kite starts with a totally new plan form, slightly more compact and with wider tips. Less obvious but perhaps the biggest upgrade are the internal diagonal ribs which help to keep the upper surface clean while creating a more solid internal structure. We have included internal straps to link the tension from the diagonals to the lines in order to create a uniform tension across the span. TheOzone Chrono V3 Kites  upper and lower surface tension has been manipulated to reduce its effect on the internal structure resulting in a cohesive, stiffer wing in flight.

     

     

    We’ve radically improved the overall flying sensation, making the Ozone Chrono V3 Kite more responsive and reactive giving the rider a more direct feel and confidence. We’ve focused on creating a progressive feeling in the bar throughout the depower throw range, keeping consistent control in light or high winds. The Ozone Chrono V3 Kite handling has an impeccably smooth turning motion and the kite has nice drive following through the turn, which means the Ozone Chrono V3 Kite can easily be looped. The Ozone Chrono V3 Kite is more reactive due to being a stiffer wing, which means it’s incredibly efficient even in the lightest breeze. With the Ozone Chrono V3 Kite upwind riding has become a "no brainer" and this kite will get you out in winds you previously thought were unkiteable. Stability is essential no matter what conditions you’re out in, we’ve made sure the Ozone Chrono V3 Kite holds its ground and delivers the utmost rock-solid stability. The Ozone Chrono V3 Kite’s multi-purpose design means it is perfect for high performance Twin Tip freeriding - launching yourself into big floaty airs or out and out power and speed riding. Hydrofoil riders will instantly notice the improved stability and tacking/gybing potential of the Ozone Chrono V3 Kite, it will lift you for longer making maneuvers smoother and more intuitive.

     

     

    Snow kiters will notice a significant performance boost of the Ozone Chrono V3 Kite over its predecessor, ensuring riders have power to carve up the snow and sky in even the lightest breeze. The Ozone Chrono V3 Kites responsive handling has expanded the realm of possibility for landboarders, giving more control for engaged freestyle maneuvers. The incredible stability of the Ozone Chrono V3 Kite gives riders the assurance they need to go for new tricks without hesitation. The Chrono V3 is designed to deliver, for the competent kiter aspiring to ride an enhanced performance kite, which is powerful yet at the same time forgiving and not demanding. Get ready to experience heightened sensations that will give you the confidence to take your riding skills to a whole new level! The Ozone Chrono V3 Kite is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. Do not use the Ozone Chrono V3 Kite in waves. Always use a Brake Handle when flying a foil kite. This is the handle/line spanned between the back leader lines on your control system. This easy to grab handle makes inflation, self-landing and reverse launch easier. The Ozone Chrono V3 Kite features a simple yet effective front line flag out release. After releasing the flag out check the speed system, bridle lines and flying lines for twists before restart. Speed System and Bridle lines should be regularly checked and maintained in the correct trim or the kite will not perform as designed. If they are worn or not to factory specification (+ or - 15mm) they must be replaced.

     

     

    Ozone Chrono Kite Design & Performance Features

     

    • Exceptional Ozone Factory construction – World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Designed with OZ-CAD – The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical inflatable and foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight.
    • Performance Double Surface – The Chrono V3 has a lightweight double surface design that is mid-high aspect ratio and combines 38 to 44 cells depending on the size selection. The high number of cells means the ribs are positioned closer together, producing an ultra smooth surface. This corresponds to reduced drag and a clean profile, resulting in superior flight efficiency.
    • Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow. This drastically improves overall performance as the foil remains true to the designed shape.
    • Internal Diagonals and Straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.
    • Optimized Leading Edge Air Intakes – Precisely positioned intake valves along the Leading Edge lead to a stability increase at all angles of attack. The inflation is easy and safe as the kite rapidly inflates.
    • Sheathed Dyneema Bridle Lines – High quality, low stretch sheathed Dyneema bridle lines for maximum strength and performance. This is the same bridle line we have used on our snowkite range for the past 10 years.
    • Double Pulley Speed System – Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
    • Water Drainage Channels – An internal channel is shaped into the end of each cell along the trailing edge. This allows loose sand or water to run between the cells and out of the tips during flight. The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.

     

    Ozone Chrono Kite Wind Range & Bar Size

     

     

    Learn More
  7. Kite Line Ozone Chrono V3 Kite

    2018 Ozone Chrono V3 Kite Complete w/Freeride Bar & Lines

    Price From: $2,600.00

    Ozone Chrono V3 Kite

     

     

    Read more on what Ozone says about the Ozone Chrono V3 Kite

     

    Born from the Chrono legacy and packed full of the latest technology, this all new Ozone Chrono Kite takes it to the next level. The Ozone Chrono V3 Kite is by far the most universal high level foil kite, you can expect outstanding performance across the board. Our Ozone Chrono V3 Kite design brief was to enhance every aspect of the V2. To do this we had to take the design to the next level incorporating features and understanding from the highest performance race kite on the planet, the R1 V2. It was a lofty goal but we believe we have made it happen. The Ozone Chrono V3 Kite starts with a totally new plan form, slightly more compact and with wider tips. Less obvious but perhaps the biggest upgrade are the internal diagonal ribs which help to keep the upper surface clean while creating a more solid internal structure. We have included internal straps to link the tension from the diagonals to the lines in order to create a uniform tension across the span. TheOzone Chrono V3 Kites  upper and lower surface tension has been manipulated to reduce its effect on the internal structure resulting in a cohesive, stiffer wing in flight.

     

     

    We’ve radically improved the overall flying sensation, making the Ozone Chrono V3 Kite more responsive and reactive giving the rider a more direct feel and confidence. We’ve focused on creating a progressive feeling in the bar throughout the depower throw range, keeping consistent control in light or high winds. The Ozone Chrono V3 Kite handling has an impeccably smooth turning motion and the kite has nice drive following through the turn, which means the Ozone Chrono V3 Kite can easily be looped. The Ozone Chrono V3 Kite is more reactive due to being a stiffer wing, which means it’s incredibly efficient even in the lightest breeze. With the Ozone Chrono V3 Kite upwind riding has become a "no brainer" and this kite will get you out in winds you previously thought were unkiteable. Stability is essential no matter what conditions you’re out in, we’ve made sure the Ozone Chrono V3 Kite holds its ground and delivers the utmost rock-solid stability. The Ozone Chrono V3 Kite’s multi-purpose design means it is perfect for high performance Twin Tip freeriding - launching yourself into big floaty airs or out and out power and speed riding. Hydrofoil riders will instantly notice the improved stability and tacking/gybing potential of the Ozone Chrono V3 Kite, it will lift you for longer making maneuvers smoother and more intuitive.

     

     

    Snow kiters will notice a significant performance boost of the Ozone Chrono V3 Kite over its predecessor, ensuring riders have power to carve up the snow and sky in even the lightest breeze. The Ozone Chrono V3 Kites responsive handling has expanded the realm of possibility for landboarders, giving more control for engaged freestyle maneuvers. The incredible stability of the Ozone Chrono V3 Kite gives riders the assurance they need to go for new tricks without hesitation. The Chrono V3 is designed to deliver, for the competent kiter aspiring to ride an enhanced performance kite, which is powerful yet at the same time forgiving and not demanding. Get ready to experience heightened sensations that will give you the confidence to take your riding skills to a whole new level! The Ozone Chrono V3 Kite is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. Do not use the Ozone Chrono V3 Kite in waves. Always use a Brake Handle when flying a foil kite. This is the handle/line spanned between the back leader lines on your control system. This easy to grab handle makes inflation, self-landing and reverse launch easier. The Ozone Chrono V3 Kite features a simple yet effective front line flag out release. After releasing the flag out check the speed system, bridle lines and flying lines for twists before restart. Speed System and Bridle lines should be regularly checked and maintained in the correct trim or the kite will not perform as designed. If they are worn or not to factory specification (+ or - 15mm) they must be replaced.

     

     

    Ozone Chrono Kite Design & Performance Features

     

    • Exceptional Ozone Factory construction – World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Designed with OZ-CAD – The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical inflatable and foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight.
    • Performance Double Surface – The Chrono V3 has a lightweight double surface design that is mid-high aspect ratio and combines 38 to 44 cells depending on the size selection. The high number of cells means the ribs are positioned closer together, producing an ultra smooth surface. This corresponds to reduced drag and a clean profile, resulting in superior flight efficiency.
    • Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow. This drastically improves overall performance as the foil remains true to the designed shape.
    • Internal Diagonals and Straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.
    • Optimized Leading Edge Air Intakes – Precisely positioned intake valves along the Leading Edge lead to a stability increase at all angles of attack. The inflation is easy and safe as the kite rapidly inflates.
    • Sheathed Dyneema Bridle Lines – High quality, low stretch sheathed Dyneema bridle lines for maximum strength and performance. This is the same bridle line we have used on our snowkite range for the past 10 years.
    • Double Pulley Speed System – Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
    • Water Drainage Channels – An internal channel is shaped into the end of each cell along the trailing edge. This allows loose sand or water to run between the cells and out of the tips during flight. The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.

     

    Ozone Chrono Kite Wind Range & Bar Size

     

     

    Learn More
  8. Kite Line Ozone Chrono Kite

    2018 Ozone Chrono V3 Kite Complete w/Race Bar & Lines

    Price From: $2,650.00

    Ozone Chrono V3 Kite

     

     

    Read more on what Ozone says about the Ozone Chrono V3 Kite

     

    Born from the Chrono legacy and packed full of the latest technology, this all new Ozone Chrono Kite takes it to the next level. The Ozone Chrono V3 Kite is by far the most universal high level foil kite, you can expect outstanding performance across the board. Our Ozone Chrono V3 Kite design brief was to enhance every aspect of the V2. To do this we had to take the design to the next level incorporating features and understanding from the highest performance race kite on the planet, the R1 V2. It was a lofty goal but we believe we have made it happen. The Ozone Chrono V3 Kite starts with a totally new plan form, slightly more compact and with wider tips. Less obvious but perhaps the biggest upgrade are the internal diagonal ribs which help to keep the upper surface clean while creating a more solid internal structure. We have included internal straps to link the tension from the diagonals to the lines in order to create a uniform tension across the span. TheOzone Chrono V3 Kites  upper and lower surface tension has been manipulated to reduce its effect on the internal structure resulting in a cohesive, stiffer wing in flight.

     

     

    We’ve radically improved the overall flying sensation, making the Ozone Chrono V3 Kite more responsive and reactive giving the rider a more direct feel and confidence. We’ve focused on creating a progressive feeling in the bar throughout the depower throw range, keeping consistent control in light or high winds. The Ozone Chrono V3 Kite handling has an impeccably smooth turning motion and the kite has nice drive following through the turn, which means the Ozone Chrono V3 Kite can easily be looped. The Ozone Chrono V3 Kite is more reactive due to being a stiffer wing, which means it’s incredibly efficient even in the lightest breeze. With the Ozone Chrono V3 Kite upwind riding has become a "no brainer" and this kite will get you out in winds you previously thought were unkiteable. Stability is essential no matter what conditions you’re out in, we’ve made sure the Ozone Chrono V3 Kite holds its ground and delivers the utmost rock-solid stability. The Ozone Chrono V3 Kite’s multi-purpose design means it is perfect for high performance Twin Tip freeriding - launching yourself into big floaty airs or out and out power and speed riding. Hydrofoil riders will instantly notice the improved stability and tacking/gybing potential of the Ozone Chrono V3 Kite, it will lift you for longer making maneuvers smoother and more intuitive.

     

     

    Snow kiters will notice a significant performance boost of the Ozone Chrono V3 Kite over its predecessor, ensuring riders have power to carve up the snow and sky in even the lightest breeze. The Ozone Chrono V3 Kites responsive handling has expanded the realm of possibility for landboarders, giving more control for engaged freestyle maneuvers. The incredible stability of the Ozone Chrono V3 Kite gives riders the assurance they need to go for new tricks without hesitation. The Chrono V3 is designed to deliver, for the competent kiter aspiring to ride an enhanced performance kite, which is powerful yet at the same time forgiving and not demanding. Get ready to experience heightened sensations that will give you the confidence to take your riding skills to a whole new level! The Ozone Chrono V3 Kite is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. Do not use the Ozone Chrono V3 Kite in waves. Always use a Brake Handle when flying a foil kite. This is the handle/line spanned between the back leader lines on your control system. This easy to grab handle makes inflation, self-landing and reverse launch easier. The Ozone Chrono V3 Kite features a simple yet effective front line flag out release. After releasing the flag out check the speed system, bridle lines and flying lines for twists before restart. Speed System and Bridle lines should be regularly checked and maintained in the correct trim or the kite will not perform as designed. If they are worn or not to factory specification (+ or - 15mm) they must be replaced.

     

     

    Ozone Chrono Kite Design & Performance Features

     

    • Exceptional Ozone Factory construction – World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Designed with OZ-CAD – The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical inflatable and foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight.
    • Performance Double Surface – The Chrono V3 has a lightweight double surface design that is mid-high aspect ratio and combines 38 to 44 cells depending on the size selection. The high number of cells means the ribs are positioned closer together, producing an ultra smooth surface. This corresponds to reduced drag and a clean profile, resulting in superior flight efficiency.
    • Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow. This drastically improves overall performance as the foil remains true to the designed shape.
    • Internal Diagonals and Straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.
    • Optimized Leading Edge Air Intakes – Precisely positioned intake valves along the Leading Edge lead to a stability increase at all angles of attack. The inflation is easy and safe as the kite rapidly inflates.
    • Sheathed Dyneema Bridle Lines – High quality, low stretch sheathed Dyneema bridle lines for maximum strength and performance. This is the same bridle line we have used on our snowkite range for the past 10 years.
    • Double Pulley Speed System – Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
    • Water Drainage Channels – An internal channel is shaped into the end of each cell along the trailing edge. This allows loose sand or water to run between the cells and out of the tips during flight. The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.

     

    Ozone Chrono Kite Wind Range & Bar Size

     

     

    Learn More
  9. Kite Line 2017 Ozone Access V7 Snowkite

    Ozone Access V7 Snowkite

    Price From: $1,125.00

    2017 Ozone Access V7 Snowkite

     

     

    Read more on what Ozone says about the 2017 Ozone Access V7 Snowkite

     

    The seventh version has been further refined and re-modeled for improvements in both ease of use and flying characteristics. The design goal of the 2017 Ozone Access V7 Snowkite was to improve all aspects of the kite to allow new comers to easily enjoy the sport from their very first session. This is made possible by creating an incredibly stable kite, which has constant pull, a large wind range and predictable handling. The 2017 Ozone Access V7 Snowkite has flatter arc than it's predecessors giving it a wider wind range, this means more power and more depower. The rib spacing has been optimized to clean up the surfaces toward the tip, which sees gains in both performance and handling. New tab positions offer a rock solid feel in the air and maintain quick turning speed with a more responsive bar feeling.

     

     

    The 2017 Ozone Access V7 Snowkites low aspect ratio ensures stability in the gustiest of conditions, delivering constant power and progressive pull. Blow-out-valves on the under surface help avoid damage if the kite is crashed. Even though the 2017 Ozone Access V7 Snowkite is developed for teaching and entry level riders it has become a favorite for experienced riders who require ultra stability in turbulent high mountain conditions. The 2017 Ozone Access V7 Snowkiteis also a favorite for expeditions where it is essential to have safe and easy to use kites in extreme conditions.

     

    2017 Ozone Access V7 Snowkite Features

     

    • Entry level de-power foil.
    • Stable, predictable, unsurpassed ease of use.
    • The kite of choice for new comers and snowkite schools.
    • Revolutionary Internal Re-Ride Release System - looses all power in the kite and ready to ride after activating again.
    • Designed with OZ-CAD - The FUTURE is NOW. All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • Exceptional Ozone Fa ctory construction - World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Internal Re-Ride Release System - The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
    • Double pulley Speed System - Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
    • High quality Oz Tex 40D - We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
    • Sheathed bridle lines - High quality, low stretch sheathed bridle lines for maximum strength and performance
    • Blow out valves - Under surface Blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
    • Dirt-out wing tips - The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
    • Fool proof line connectors - Fool proof numbered line connectors prevent incorrect rigging of the flying lines to the kite.
    • Comparable feeling throughout the size range - We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

     

    2017 Ozone Access V7 Snowkite Colors

     

    Please Specify Color when Ordering

     

    2017 Ozone Access V7 Snowkite Bar

     

     

    2017 Ozone Access V7 Snowkite Wind Range

     

     

     

    The all new Internal Re-Ride Safety System is the result of intense research and development with the aim to create the safest system on the market. The goal was to have a re-ride system that once activated the kite can easily be re-launched without having to untangle or clear any lines. The new system stalls the kite with an internal line – the kite depowers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again. Another big advantage of our Internal Re-Ride Safety System is the landing and secure option. We have added the Secure Loop in the line approx 2m away from the rider. To land the kite with no pull simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground - it can either be hooked onto a carabineer on your harness or onto the bar horn. This makes landing and packing your kite safe and easy even in high winds. We thoroughly enjoyed developing and testing the Internal Re-Ride Safety System throughout the last season. It has made mountain climbing and packing on top so much more enjoyable, safe, easy and quick for the user. Please note, the new Internal Re-Ride Safety System cannot be upgraded to any older kites as it includes lines that are running inside your kite. Also, for reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.

    Learn More
  10. Kite Line Ozone Connect Pro Harness w/Spreader

    Ozone Connect Pro Harness w/Spreader Bar

    $250.00

    Ozone Connect Pro Harness 

     

    Read more on what Ozone has to say about the Ozone Connect Pro Harness w/Spreader Bar 

     

    The Ozone Connect Pro Harness is designed for comfort, support and flexibility in use, this harness is perfect to wear over or under your snow gear. Featuring high quality Aluminium adjustment buckles on the spreader bar and leg straps. The Ozone Connect Pro Harness has been designed like a rock climbing harness so that it will not ride up.

    • Waist harness with removable leg straps is ideal for all snow and land kiters
    • Strong yet lightweight construction
    • Stainless Steel spreader bar with comfortable spreader pad
    • Ergonomic shaping and enhanced load distribution
    • Fully adjustable so one size fits all

     

     

    Ozone Connect Pro Harness Features

     

    Spreader bar - The Stainless Steel spreader bar attaches directly to both the harness and the leg straps reducing spreader bar upward tilt. Extra padding and neoprene covered for comfort.
    Aluminium buckles - High quality extra strong aluminium adjustment buckles are easy to open and close. This makes fitting on the harness very easy even under snow gear. Smooth adjustment reduces wear on webbing.
    Strong internal structure - Plastic layers along the back section with full length webbing support for ideal load distribution and extra strength.
    Removable leg support straps - Color coded, thin and light yet comfortable leg straps with neoprene lining for a strong grip/hold on winter clothing. The leg straps are connected at an ergonomic angle distributing vertical loads between the attachment point and leg padding. They can be easily removed or fitted under your snow pants without having to take them off.
    Ergonomic shaping - Increased support through wider and improved ergonomic shaped panelling. The load is distributed evenly over a larger area.
    Comfort grip fit - Extra padded areas for increased comfort and neoprene lining for a strong grip/hold on winter clothing. It also protects better against the cold.
    Technical backpack connection - Female buckles on each side connect directly with Frenzy and Summit technical backpacks. Simply unclip the waist strap from the backpack, remove it and click the bag straps into the harness.
    Kite leash attachment - Easy to access front kite leash attachment.
    Webbing loop attachments - Attach a grab handle or ropes for pulling sledges to the webbing loops on each side of the harness.
    One size fits all - Fully adjustable to fit all shapes and sizes, both under or over clothing and outer winter layers.

     

    Learn More
  11. Kite Line Ozone Hyperlink VI Kite

    Ozone Hyperlink VI Kite (Kite Only)

    Price From: $1,500.00

    Ozone Hyperlink VI Kite

     

    Read more about what Ozone says about the Ozone Hyperlink VI Kite

     

    Innovation is often inspired by being in the right place, at the right time, with all the right connections coming together allowing the genesis of a new vision or era. The Ozone Hyperlink VI Kite is our vision to take you into that new era. The design brief was outrageous - develop a kite to bridge the gap between inflatable and foil kites while making it excel on water, snow and land. 

     

     

    The Ozone Hyperlink VI Kite is a true multipurpose foil kite, it brings together the performance of a foil with the feeling of an inflatable. One kite to cover almost every aspect of kiting! Free ride, hydrofoil, boost and float, air style or unhooked, backcountry snow missions, you name it and it delivers.The Ozone Hyperlink VI Kite is unique, it’s the first foil kite to be as dynamic and fun to ride as a performance inflatable. With an unparalleled level of stability, handling and bar feeling the Hyperlink takes it to the next level.

     

     

    With an innovative valve design it can be ridden on the water, snow and land safely, as a Closed Cell or Open Cell kite. We know many inflatable kite riders can see the advantages of high performance foil kites such as the Chrono or R1, however the bridle lines and complexity can be daunting. The Ozone Hyperlink VI Kite is simple and user friendly, the mid aspect ratio and minimal bridle plan makes taking the jump from inflatable to foil kite easy! No matter how hard-core inflatable you are, now is the time to expand your universe. Take that step into the unknown - the reward is more adrenaline, more riding time and a new feeling!

     

     

    Ozone Hyperlink VI Kite Open Cell vs. Closed Cell Modes

     

    Watch the how-to video to ensure you understand correct techniques and how to change between Closed Cell and Open Cell modes.

    • Closed Cell Mode
      • Closed Cell Mode is recommended when riding on water.
      • Inflation is quick and smooth after pre-inflating the kite.
      • If you are already an inflatable kite rider it will only take you one session to get to know the Hyperlink.
      • For twin tip riders once the kite is in the air and powered up the similarities to an inflatable kite can be felt.
      • It has progressive handling, generates smooth consistent power, great upwind performance and jumps well with long hang time and smooth landings.
      • Ideal for Foil Board riding, the Hyperlink produces more power than an inflatable kite size per size - this means you can use a smaller more maneuverable kite to generate power.
      • Maneuvers are made easy thanks to the stability and lift produced as the Hyperlink flies through the zenith – a great help when learning to tack and gybe giving you time and float to change board direction.
      • In light winds the Hyperlink will fly above you unlike inflatable kites that have a tendency to fall out of the sky. This makes getting set up for starting stress free.

     

    • Open Cell Mode
      • Open Cell Mode is recommended when riding on snow or land.
      • Similar inflation as in Closed Cell Mode, slightly quicker due to the valve zips being open.
      • Snow and land riding are a blast, the easy inflation and 5-Line Re-Ride Release System means it can be taken anywhere safely.
      • The Hyperlink combines the perfect balance of handling, pop and float to make the most of terrain and flats.
      • It is easy to get big air on this machine!

     

     

    Ozone Hyperlink VI Kite Release Landing Systems

     

    • 4-Line: The Hyperlink comes standard with our Front Line Flag Out Release System. This is recommended for water use – it is a simple and effective flag out when the release is activated – it works the same way as our 4-line inflatable water kite range.
    • 5-Line (use in Open Cell mode only): The optional 5-Line Re-Ride Release System Conversion Kit is recommended for snow or land use. The Re-Ride Release System de-powers the kite instantly without tangling, and falls to the ground to re-launch when ready.
    • Back Line Brake Handle: A quick and easy landing option in light winds - the Hyperlink can be stalled down the ground using the Brake Handle.

     

    Ozone Hyperlink VI Kite Design & Performance Features

     

    • Innovative Zip Valve – Our newly developed Zip Valve allows the Hyperlink to be used as a Closed Cell or Open Cell kite. Essentially opening the Zip Valve converts the kite from a Closed to an Open cell foil, allowing air to pass in both directions. On the snow this is a great advantage as the kite can be landed and packed like a conventional open cell foil.
    • 4-line and 5-line modes – The Hyperlink comes standard with our Front Line Flag Out Release System. This is recommended for water use – it is a simple and effective flag out when the release is activated – it works the same way as our 4-line inflatable water kite range. The optional 5-Line Re-Ride Release System Conversion Kit is recommended for snow or land use. The Re-Ride Release System de-powers the kite instantly without tangling, and falls to the ground to relaunch when ready.
    • High performance materials – High-tenacity durable sailcloth with a superior strength to weight ratio.
    • Internal diagonals and straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.
    • Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification used on the Chrono and Snowkite range.
    • LE Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow. This drastically improves overall performance as the foil remains true to the designed shape.
    • Designed with OZ-CAD – The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with parameters specifically formulated to calculate unique aspects required in technical Inflatable and Foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.
    • Exceptional Ozone Factory construction – World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.
    • Water Drainage Channels – An internal channel is shaped into the end of each cell along the trailing edge. This allows loose sand or water to run between the cells and out of the tips during flight. The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
    • Comparable feeling throughout the size range – We work extensively during our R&D process on each and every kite to develop a range of sizes that feel in tune with each other.

     

    Ozone Hyperlink VI Kite Wind Range & Bar Size Land & Water

     

     

    Ozone Hyperlink VI Kite Important Notes

     

    • The kite is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. Do not use the kite in waves.
    • Always use a Brake Handle when flying a foil kite. This is the handle/line spanned between the back leader lines on your control system. This easy to grab handle makes inflation, self-landing and reverse launch easier.
    • This kite features a simple yet effective front line flag out release (4-Line mode) or optional 5-Line Re-Ride Release. *Only use the 5-Line release when the kite is in Open Cell mode. After releasing the flag out you should check the speed system, bridle lines and flying lines for twists before restart.
    • Speed System and Bridle lines should be regularly checked and maintained in the correct trim or the kite will not perform as designed. If they are worn or not to factory specification (+ or - 15mm) they must be replaced.

     

    Ozone Hyperlink VI Kite Sizes

     

    5 - 7 - 9 - 12m

     

    Learn More

Items per page 5 10 15 20 25 All

// 11 Items //

Snow kiting is becoming more and more popular, especially with the increased popularity of kitesurfing. Snow kiting is great because you can travel up hill, down hill, and anywhere you please, just watch out for those trees! Snow kiters have been known to travel very long distances, and some freestylers push the boundaries seeking big air, big tricks, and bigger glory. Whether you are new to the sport of snow kiting, or a seasoned kiter, Kite-Line as all of the latest and greatest gear from the top brands in the industry for you to get started or get back in the air. Check out our snow kiting kites, boards, accessories, and DVDs and take to the skies!