You have no items in your shopping cart.
The Spleene RIP Kiteboard represents a clear idea of how a Kiteboard needs to be shaped. We benefit from more than 30 years of shaping experience when we develope our product. This is especially noticable on the Spleene RIP Kiteboard, were always motivated to improve the standards for this board. No one tells us what’s good and what’s not. No matter if it’s easy planing, upwind performance, pop for jumps or smoothness or riding, only the sum of all these features will result in the perfect kiteboard for you. The new Spleene High Tech Line RIPs provide clear proof that you don’t need to waive anything to have a perfect kite day.
The Design Features:
The Spleene Door High Teck Lightwind Kiteboards shape detail is a double concave channel at the bottom of the boards. This allows for cleaner and earlier planing. When compared to a conventional double concave this underwater hull has got a parabolic cross section, specially designed by Spleene to provide significantly more grip due to the longitudinal guide of the sideways channel rails, even in choppy water. A development you can expect from Spleene. Only consistent development turns this concept into a Spleene High Tech Door. Compared to the previous models the new Door is now equipped with the Advanced Jet Bottom.
The Spleene Door Kiteboard stands for a unit of design and technology, which can only be provided by the original Door. As the inventor of the Door we have got this unique head start, which can be noticed immediately, in any condition, by any kiteboarder. The 2013 Spleene Door Kiteboards sporty overall impression coupled with a high level of comfort result in this special riding experience. Upwind and low-end abilities have set standards in kiteboarding within the last 10 years. Its concave outline, large surface and flat rocker line are responsible for this performance. However, these features alone are not sufficient by far to create a kiteboard that meets your and our demands.
The Design Features:
How do you define a radical kiteboard? By combining apparent contradictions. More performance with more control. More stability with less weight. As a result Spleene rs-boards always provide the maximum output. This applies not only to the board. Also you as a rider will show a significantly improved performance. However, the rs is not only about performance. It’s also about how easy it can be called up and controlled. The result will convince you.
Spleen RS-Line Board Features
Full Info on Spleen RS-Line Board Technology
Spleen RS-Line Board Sizes
32 x 40cm / 135 x 41cm / 138 x 42.5cm
Spleen RS-Line Board Includes
After a successful introductory year the 2010 Ocean Rodeo Go-Joe is promising to be everything we ever needed. Stronger, better, lighter, and easier to use. A great idea and an innovative product that is moving from beginners to wave riders and mainstream users. If you don't have one it's worth to check it out.
Traditional surfboard style leashes used to connect kiters with their boards have proven to be dangerous in both the water and on land. The GO – Joe™ is a new “leash free” tool to assist in the retrieval of your kiteboard without fear of being impacted or impeded by a leashed board. The GO – Joe™ is perfect for beginners and intermediates learning board recovery techniques. Advanced riders will appreciate the faster board recovery in extreme conditions or while learning new tricks.
What is it?
The GO – Joe™ is an inflatable tube structure attached to deck of the kiteboard that uses the natural forces of buoyancy distribution and wind to roll you kite board right side up and accelerate it down wind. These features combined with high visibility and additional floatation will make the use of surfboard style leashes in kiteboarding obsolete.
1. The unique hour glass design of the inflatable tube structure places the self righting buoyancy at a high pivot point. This distribution of flotation will power roll your board right side up if it lands foot straps down in the water, (foot straps down create drag, slowing the boards drift)
2. With the board right side up and foot strap resistance eliminated, the GO – Joe™ is positioned on the board forward of center allowing the wind to turn and sail the GO – Joe ™ down wind towards the rider. If the rider maintains their position with the kite at the zenith the board will simply sail downwind towards you.
3. The hour glass shaped design of the GO – Joe™ fits comfortably between the riders feet and does not restrict mobility. The hour glass shape also eliminates drag caused by spray from the boards rails
4. The GO – Joe™ is very light and durable using our proven manufacturing techniques.
Construction and durability:
1. The inflatable tubes are manufactured with the same techniques and materials used on our kite tubes. 110 micron PU inner bladder with HD Nylon outer cover. Bomber!
2. Deck mounting plate uses the same construction as our foot pad deck plates.
How to install the GO – Joe™
1. Simply screw the GO – Joe™ into the grab handle inserts found on any board. Pump-up the GO – Joe™ tube, and you are ready to ride! Deflate the GO Joe™ for easy storage and transport.
2. One size fits all; available in high visibility orange and yellow.
View more on the 2009 Ocean Rodeo Go Joe
The Litewave Wing Kiteboard has evolved into the ultimate light wind machine! Riding in ultra light wind has never easier, even for the big guys. The Litewave Wing Kiteboard tip-to-tip radical concave smooths out chop and makes for a very positive carving feeling. The Litewave Wing Kiteboard tips are very thin and flexy with built-in torsion bars to maximize carving performance under load. This board is truly a "session saver".
The Litewave Wing Kiteboard features wide tips and unique outline known as 'parabolic sidecut' enable planing and rocket you upwind. The wider tips give an unbelievable "load and pop" even in light condition. This 2013 Litewave Wing Kiteboard feels like snowboarding in bottomless powder. Our quality wood core and composite construction enhance riding properties as well as ensuring that your board will last for years to come.
Litewave Wing Kiteboard Features
Litewave Wing Kiteboard Sizes
146x45 - 153x45 - 161x45
Over a year of R&D in Mauritius, California, and Florida led Litewave to develop Quad Surf wave board. It is designed for the waves. A pulled in bat-tail outline and a faster-gun style rocker allows this board to really drive through and keep speed in the bottom turns, while the quad-fin configuration gives incredible grip for snappy off-the-lips.
The quad fin also makes for a wave board with limitless top end speed yet very snappy and responsive feel unlike other thruster configurations which are slower.
The Quad Surf has been built to really withstand the abuse that a kite rider will give it. Machined EPS core is wrapped with wood-veneer/glass/epoxy composite laminate to provide impact resistance and the optimum strength-to-weight ratio.
View Litewave Designs website
The Flysurfer Radical4 Kiteboard lives up to its name. Even sportier than its predecessor, the Flysurfer Radical4 Kiteboard is available on the market in four sizes. The Flyboards-Development team surrounding Andreas Hanrieder and Eddy Lansink did an excellent job, optimizing the Flysurfer Radical4 Kiteboard in practically all regards. The first priority was the switch in production center from Asia to Europe, which led to a higher quality of workmanship. Once this was implemented, a stronger differentiation of the range could be undertaken, whereby each board was tuned individually to riding weight and range of use.
Flysurfer Radical4 Kiteboard New Changes
1. New combination of wood-foam core
2. Torsion Fibre Layers
3. Heelside Channel
4. Tucked-under Edge
The additional Grabrails are absolutely soft, but still offer the best control for board-offs or one-footers. Thus, holding the board has become much easier. The Grabrails can easily be glued to the deck.
6. Straps & Pad
The new straps have a simple and quickly-adjustable Lace-System, previously proven with the wakeboard bindings. The enormous adjustment range provides a range of use from shoe size 38 (barefoot) to shoe size 48 (with neoprene boots).
Flysurfer Radical4 Kiteboard Features
|All Radical4s have a hybrid core, aimed at achieving a maximum harmony of board weight, performance and durability. A foam core comes into use on the toe side in the longtitudinal direction, providing a significant reduction in weight. On the side with more load, the heel side, a robust wood core is used, guaranteeing break stability and the dynamic recovery force of the board.|
|The innovative assembly of a unidirectional woven layer lengthwise and an additional woven layer (torsion layer) at a 45-degree-angle achieves considerably higher torsion stiffness, which is reflected in the increased jump performance with nevertheless good comfort.|
|The deep Heelside Channel provides good grip and makes it possible to set the edge more effectively for jumping.|
|The „Tucked-Under“ Edge has been cut off at a 45-degree-angle, as surfboards have been manufactured traditionally. This makes the board well-controllable, even in choppy conditions.|
|The additional Grabrails are absolutely soft, but still offer the best control for board-offs or one-footers. Thus, holding the board has become much easier. The Grabrails can easily be glued to the deck.|
|All of our boards have a special high-quality UV- and scratch-resistant coating, and thus offer a long product life. The design is protected under the coating, so that it does not get damaged if the board is slightly scratched.|
|The asymmetrical rounder and shorter toeside outline increases control when riding toeside and provides increased comfort.|
|Wider Insert Positions make it easier to land. There are three different stance options possible - Small (50.4 cm), Normal (56.2 cm) and Wide (61.2 cm).|
Flysurfer Radical4 Kiteboard Technical Data
|Stance width (cm)||50.4 - 56.2 - 61.2
||50.4 - 56.2 - 61.2||50.4 - 56.2 - 61.2||50.4 - 56.2 - 61.2|
|Core Material||Wood-Foam Core||Wood-Foam Core||Wood-Foam Core||Wood-Foam Core|
|Fins||4x 5cm G10||4x 5cm G10||4x 5cm G10||4x 5cm G10|
Flysurfer Radical4 Kiteboard Sizes
126.5 x 36 ~ 134 x 40 ~ 138 x 42 ~ 144 x 46
If you seek nirvana riding powered-up in the waves, the Flysurfer FlyWave Kiteboard offers the perfect combination of agility, control, durability and performance. There is no need for jibing on the Flysurfer FlyWave Kiteboard. Powerful landings are no problem, because of its full woodcore. The Flysurfer FlyWave Kiteboard ’Flip Nose’ on both ends eliminates spray and effectively prevents catching water. The Flysurfer FlyWave Kiteboard got lighter and more comfortable, due to an optimized ‘flex under load’ pattern, a softer footpad and comes equipped with new easy adjustable surf-footstraps. The Flysurfer FlyWave Kiteboard is designed in association with Dutch wave-guru Ruud Overwater, who has put over 6 years of wave riding experience into this board. The Flysurfer FlyWave Kiteboard is an easy to use mutant style board for the rider who wants to ride the waves powered with a board that has a surfy feel.
Flysurfer FlyWave Kiteboard Features
Flysurfer FlyWave Kiteboard Technical Data
|Stance width (cm)||38,5 - 41,5|
|Core Material||Full Wood Core|
|Fins||3x 6cm + 2x 4,5cm G10|
Flysurfer FlyWave Kiteboard Size
145 x 39
The all new Flysurfer FlySplit combines the opportunity to dissemble the board in the middle with the performance of a normal kiteboard. This is the crucial feature that wins extra space when traveling, whilst maintaining that the kiteboard performs just as well as a Radical or Flydoor. Innovation has always been one of Flysurfer’s highest aspirations when it comes to product development. This self-set aim motivates the development team surrounding Andi Hanrieder every day to create new ideas. One of these truly innovative products is the new boardline, FlySplit.
2014 Flysurfer FlySplit Highlights
Save when traveling - Especially helpful in these times of ever increasing excess baggage fees, charged by airlines on route to your favorite kite destinations, the FlySplit gives you the opportunity to dissemble your kiteboard easily and quickly so that it fits into your travel-bag. This innovation ensures that you won’t ever have to wait the extra minutes -or hours- at the beginning and end of your journey with check in and collection of your sporting luggage. The benefits are not exclusive to air-travel, when reaching your kite spot in a smaller car, or even in a sports car, the FlySplit offers you great flexibility. You might also take the chance to give your friend a lift to the spot, something which would otherwise be near impossible.
Precise manufacture of a high quality construction - To meet the high demands on this product, we’ve invested three years of intense testing and developing the FlySplit to create a kiteboard which is more than just a separable kiteboard. Thanks to our manufacturing in Europe we can guarantee that the FlySplits are produced with the best resources. By using only the best material, we achieve riding characteristics which combine both comfort and high performance. The splitting construction is impressively simple. The zigzag construction joins easily together and needs only to be fixed with a metal splint on both sides. In the centre and the edges of the board we use a full-wood-core to ensure great durability and dynamic performance. For the less stressed areas like the tips we use a light-foam-construction to save unnecessary weight. Due to this construction the FlySplits offers great performance but also a great deal of comfort in choppy and gusty conditions.
One system – two sizes - The FlySplit M in size 134cm x 41cm is made for those riders who love the high performance of the Radical. With the FlySplit M you do not have to miss out on neither an extreme pop for hooked or unhooked jumps nor fantastic up-wind performance. The FlySplit L is available in 160cm x 44cm. Heavier riders and kiters who do not want to miss out in light winds will love this board. The FlySplit L has a centre fin on the heel-side to increase the maximum up-wind performance. The innovative FlySplit M and FlySplit L have very low board weights, coming in at 2.55 kilograms and 3.15 kilograms respectively. This makes traveling even more fun.
Summary - The FlySplits are great allrounders, which should not be left out on any travel, whether with plane, sports car or motorcycle. Due to the fantastic opportunity of splitting the boards in half, the FlySplits are a proper alternative to normal boards on the kitesurfing market. Thanks to a three year development phase, we can guarantee that the FlySplits perform like excellent kiteboards, but are still seperable. Thus there is no compromise on quality and performance.
2014 Flysurfer FlySplit Features
The Split-System makes the FlySplits to the first separable kiteboards that do not compromise in performance.
It only takes a few seconds to easily and quickly assemble a FlySplit. Through the zigzag construction both board parts join and are fixed by two metal splints. From the car onto the water in only a in a twinkling
No more checking in sports luggage and paying extra fees when you travel. The FlySplit M fits in your normal travel bag (common bag size: 75x52x31cm). For the FlySplit „L“ please compare the pack size of the board with the internal dimensions of your suit case prior to your flight.
With their low weight of 2.55kg and 3.15kg for the FlySplit M and FlySplit L respectively, the FlySplits belong to the lightest kiteboards on the market. No extra luggage and better riding characteristics guaranteed.
All FlySplits have a hybrid core, aimed at achieving a maximum harmony of board weight, performance and durability. A foam core comes into use on the toe side in the longitudinal direction, providing a significant reduction in weight. On the side with more load, the heel side, a robust wood core is used, guaranteeing breaking stability and the dynamic recovery force of the board.
The innovative assembly of a unidirectional woven layer lengthwise and an additional woven layer (torsion layer) at a 45-degree-angle achieves considerably higher torsion stiffness, which is reflected in increased jumping performance with nevertheless good comfort.
All of our boards have a special high-quality UV and scratch-resistant coating, and thus offer a long product life. The graphic design is protected under the coating, so that it does not get damaged if the board is slightly scratched.
The „Tucked-Under“ Edge has been cut off at a 45 degree-angle, as surfboards have been manufactured traditionally. This makes the board very controllable, even in choppy conditions and reduces spray.
Wider insert positions make it easier to land. There are three different stance options possible - Small (50.4 cm), Normal (56.2 cm) and Wide (61.2 cm).
The FlySplit L has a 8cm long centre-fin on the heel-side. The centre fin increases the upwind performance especially in lightwind.
The asymmetrical rounder and shorter toe-side outline increases control when riding toe-side and provides increased maneuverability while carving.
Thanks to our manufacturing process within Europe we can guarantee highest quality and the usage of only the best materials.
2014 Flysurfer FlySplit Technicial
2014 Flysurfer FlySplit Comes with Images
The new Flysurfer FlyRace Kiteboard is the only twintip racing board on the market and offers extreme lightwind and upwind performance, like you have never experienced before! Don’t waste time lugging your big race board to the beach and screwing 4 huge fins to your fragile directional board before every session. The Flysurfer FlyRace Kiteboard ensures fast and easy tacks and jibes.
The Flysurfer FlyRace Kiteboard adjustable middle fin length, makes sure you have the perfect combination of fin length and control on every course. During its development phase, the Flysurfer FlyRace Kiteboard has proven itself to be very competitive in national and world class Course Racing and Long Distance competitions.
Flysurfer FlyRace Kiteboard Technical Data
|Stance width (cm)||44 - 49 - 54|
|Core Material||Full Wood|
|Center Fin Length
(efficient length in the water)
|34 cm G10|
|Fins||6x 6cm G10|
Flysurfer FlyRace Kiteboard Size
173 x 48
With the Flysurfer Flydoor4 Kiteboard in your quiver this means having fun, instead of hanging around on the beach. Everyone has experienced it. You get to the spot and the wind-forecast has been a few knots too optimistic.The Flysurfer Flydoor4 Kiteboard just feels much smaller than it is, however still delivers unmatched upwind performance. Thanks to the centre fin there is no other twintip board, except the FlyRace, that goes upwind better. The Flysurfer Flydoor4 Kiteboards unbelievably early planing ability combined with the unexpectedly good handling is what makes the Flydoor4 stand out above the rest. Riding toe-side, jumping, cruising.
The reputation of the Flydoor boards for having amazing light-wind properties is well known, but the huge wind-range of the boards allows you to have extra kite days even in extremely gusty conditions. Many of the small inland spots and lakes are now properly enjoyable. Because of this it is not only a great board for beginners, even though there is almost no better board to learn on. From water-start to loaded tricks, it can do everything without being too much of a challenge from it’s rider.
It’s always a challenge to combine early planing and good agility into one board. To achieve this we had to work on a lot of small details. Key to this is the redesigned 8cm long centre fin that is an important factor for upwind performance. The wood-foam composite core allows for light weight without compromising the durability. The new laminate layup gives the board more torsional stiffness which works together with the extremely thin flex-tips to give you an optimal combination of great control, comfort and dynamic feel.
It is self-evident that great riding characteristics alone are not enough. Starting with the Radical4 we moved our production to a factory in Europe that promises the highest quality and precision. Only the highest quality materials are used. For example the most high end top-sheets available. Our tried and tested footpads, G10 fins and our new comfortable and bombproof velcro foot-straps finish off the complete package. To be extra sure in regards to the durability, we used foot-strap inserts which can withstand up to 400kg of pull each. In our opinion it has to be like this, because Everyday is a kiteday!
The 2015 Slingshot Tyrant features our Fluid X Dampening System that reduces vibration which improves feel. Also new this year, Slingshot is the first brand to incorporate the new FCSII fin system, no more tools… no more headaches! The new 2015 Tyrant is the contemporary refined all around surfboard for everyday use.
The 2015 Slingshot Tyrant has a new rounded thumb tail and deep single to double concave delivers a stable board with incredible performance in any size surf. The tri-fin setup offers plenty of drive and great release off the wave to keep experienced kitesurfers ripping, while being forgiving enough for first-time surfboard riders.
2015 Slingshot Tyrant Features
The single concave and “pull-in” thumb tail allows the 2015 Slingshot Screamer to handle more speed while the truncated nose design significantly reduces swing weight making airs spin and flip tricks easier than any other board. The Screamer also features a tri-fin FCS II setup allowing you to customize the ride to your conditions and riding style. Our Fluid X Dampening System reduces vibration which improves feel.
Also new this year, Slingshot is the first brand to incorporate the new FCSII fin system, no more tools… no more headaches! From big to small and hollow to mush, the 2015 Slingshot Screamer will handle any surf you can find. Based on the T-Rex shape, the new 2015 Slingshot Screamer features a parallel outline that reduces drag and increases water speed to get more upwind performance in all surf conditions, without jeopardizing stability.
2015 Slingshot Screamer Features
The 2015 Slingshot Misfit is Engineered to provide a consistent rider controlled flex and pop, the Misfit will satisfy the needs of any rider. With the addition of our precision laser cut NACA Duct channels, the 2015 Slingshot Misfit takes freeride performance to a whole new level. Like a vacuum, the NACA Duct channels water from the middle of the board to the tip. The directed water accelerates through the channel and increases the board speed and grip to the water.
New for 2015, the Misfit now features precision laser cut NACA TECH channels. That’s right, we put aerospace design into a kiteboard. The 2015 Slingshot Misfit has raised the bar again for performance freeriding. The Misfit’s proven versatile shape, combined with Slingshot’s legendary construction and durability is the benchmark for rider improvement. The benefits to the rider are increased edge control and reduced drag through the water. Hand built in our U.S.A. factory, the 2015 Slingshot Misfit features the highest-quality and greenest materials available on the planet.
2015 Slingshot Misfit Features
2015 Slingshot Misfit Sizes
132 - 136 - 142 - 146
The 2015 Slingshot Celeritas fast rocker line maintainins perfect control while the balanced surface area allows the board to have extra lift and control in between turns.This year’s Celeritas also features a tri-fin FCS II setup. our Fluid X Dampening System which reduces vibration and improves feel. Also new this year, Slingshot is the first brand to incorporate the new FCSII fin system… no more tools, no more headaches!
The 2015 Slingshot Celeritas continues to deliver controlled progressive performance year after year. The combination of its short “trunk” style, aggressive concave, curvy outline and simple thumb tail makes the Celeritas one of the most versatile shapes in the industry. The 2015 Slingshot Celeritas also features a fast rocker line that blends from the center to the tail giving this board off the chart speed.
2015 Slingshot Celeritas Features
Features for 2015 Slingshot Asylum Kiteboard include the industry’s only Atomic Wood Core with laser cut channels. Flex performance is magnified through our Future Response Technology, delivering massive pop and outstanding flex/ rebound characteristics. Precision laser cut channels offer all the drive you need for upwind performance as well as insane tracking through all water conditions. Engineered to ride with or without fins.
However you choose to ride your 2015 Slingshot Asylum, rest assured you’ll be backed by Slingshot’s legendary construction and durability. The Asylum returns for 2015 as a top choice of elite pros and everyday core riders. The board’s unique blend of precision laser cut channels and aggressive rocker allows any riding style to excel.
2015 Slingshot Features
2015 Slingshot Sizes
134 (Red) - 138 (Yellow) - (Blue) 141
The 2015 Slingshot Ankle Biter FX utilizes the quad fin setup allows surfers to fine tune the performance of their board with either the two or four Versa Fin set up. From wake, to kite to everyday surf, the new 2015 Slingshot Ankle Biter excels in smaller surf conditions and will certainly be the All Star of your quiver. Built off of our proven Space Pickle platform this shape has earned its reputation as a fun and dynamic board for catching all types of surf.
The 2015 Slingshot Ankle Biter’s unique volume distribution offers the control and stability of a longboard while the double concave with an aggressive V spine through the tail provides looser transition from edge to edge, resulting in the agility and performance of a short-board.
2015 Slingshot Ankle Biter Features
The Angry Swallow also features the FCS II Fin Setup that allows for multiple fin setups to fit your conditions and riding style. The shorter board sizes make it easy to take with you to your favorite wave destination and fits in a wider variety of travel bags. Each of the sizes rides like a larger board without the weight and hassle. Our Fluid X Dampening System reduces vibration which improves feel. Also new this year, Slingshot is the first brand to incorporate the new FCSII fin system, no more tools… no more headaches!
The 2015 Angry Swallow is proven to be the most unique surfboard shape in kiteboarding. The T-Rex design with a truncated nose significantly reduces swing weight while still providing a central control point on the board — making airs, spins and flip tricks easier than any other board. The parallel outline reduces drag and increases water speed to get more upwind performance without jeopardizing stability.
2015 Slingshot Angry Swallow Features
The 2015 Slingshot Alien Twister FX’s unique volume distribution features a narrow “truncated” nose and wide swallow tail delivering more performance without jeopardizing speed. While the double concave and subtle V spine allows the board to transition from edge to edge for a fun and agile ride. Utilizing the quad fin setup allows surfers to fine tune the performance of their board with either the two or quad fin set up.
Whatever the wave, the 2015 Slingshot Alien Twister FX will have you begging for one more ride. Inspired by the Ankle Biter and the T-Rex surfboard, the all new Alien Twister is undoubtedly the most progressive shape yet. Its short length enables it to fit perfectly into the pocket while the concave deck provides a skateboard feel, giving you more control and maneuverability.
2015 Slingshot Alien Twister FX Features
Details like appropriate sizes and widths, narrower stance options, and lighter weights all make this 2015 Cabrinha XO the ideal choice for women of all levels. Our approach to developing the 2015 Cabrinha XO was to start from scratch and engineer this board from the ground up. The result is a performance freestyle model with a soft, responsive flex.
The 2015 Cabrinha XO Susi Mai signature model is inspired by the one and only Susi Mai. As a leader in performance riding and a role model for many, it was an easy task to create a board suited to her needs and the needs of the growing population of women in kiteboarding.
Why You Will Love Your 2015 Cabrinha XO
2015 Cabrinha XO Rider Profile: For women who want to progress their freestyle and freeriding
2015 Cabrinha XO Style
2015 Cabrinha XO Technology
2015 Cabrinha XO Sizes
127 x 38 - 130 x 39 - 133 x 40 - 136 x 41
The 2015 Cabrinha XCaliber is our competition freestyle pro model. Designed together with PKRA star, Alby Rondina, the XCaliber is designed to provide quick bursts of speed, incredible pop, and the upwind ability to keep your performance right in the box. The 2015 Cabrinha XCaliber's pop comes from our wood core and full carbon laminate. The extensive use of carbon allows this board to be our lightest, most technical twin tip.
2015 Cabrinha XCaliber Rider Profile: A premium competition freestyle board designed for the high end competitor.
Why You Will Love Your 2015 Cabrinha XCaliber
2015 Cabrinha XCaliber Style
2015 Cabrinha XCaliber Technology
2015 Cabrinha XCaliber Sizes
132 x 40 - 135 x 41 - 138 x 42 - 141 x 43
The Tronic curved tip outline and generous rocker is a chop killer. It cuts through rough water with ease and adds a whole new dimension of g-force inducing turns when banking off of waves or redirecting in the flats.
The Tronic is a performance freeride model with a shape and build that allows a rider the ability to crossover and experiment in any and all types of riding including hucking huge lofty airs. The Tronic twin tip delivers top performance and slash and run type of riding in small waves or choppy water.
Why You Will Love Your 2015 Cabrinha Tronic
2015 Cabrinha Tronic Rider Profile: For riders who like to get huge air and carve turns in the surf
2015 Cabrinha Tronic Style
2015 Cabrinha Tronic Technology
2015 Cabrinha Tronic Sizes
137 x 41 - 141 x 42 - 145 x 43
In many cases, the 2015 Cabrinha Stylus twin tip will be the difference between sitting on the beach or getting a full kiteboarding session. The 2015 Cabrinha Stylus is made to perform in the fickle conditions known as threshold winds. Threshold winds are generally thermal breezes with wind speeds just strong enough to fly a kite. The 2015 Cabrinha Stylus has a flat rocker line and extra wide outline make the most of these less than ideal wind conditions.
Why You Will Love Your 2015 Cabrinha Stylus
2015 Cabrinha Stylus Rider Profile: The Stylus is specially designed for the rider who wants to ride a twin tip in the lightest wind possible
2015 Cabrinha Stylus Style
2015 Cabrinha Stylus Technology
2015 Cabrinha Stylus Sizes
145 x 45 - 155 x 47 - 165 x 48
The 2015 Cabrinha Spectrum is a freestyle freeride model which means that it has a wide range of performance in a wide range of conditions. We use Paulownia wood core for strength and rebound and durable ultra bond PU rails. The 2015 Cabrinha Spectrum is a progression model which means that it has the ability to keep up with your riding level as you progress
Why You Will Love Your 2015 Cabrinha Spectrum
2015 Cabrinha Spectrum Rider Profile: For the rider who wants a versatile performance twin tip
2015 Cabrinha Spectrum Style
2015 Cabrinha Spectrum Technology
2015 Cabrinha Spectrum Sizes
132 x 40 - 136 x 41 - 140 x 42 - 144 x 43 - 148 x 44