You have no items in your shopping cart.
The Spleene RIP Kiteboard represents a clear idea of how a Kiteboard needs to be shaped. We benefit from more than 30 years of shaping experience when we develope our product. This is especially noticable on the Spleene RIP Kiteboard, were always motivated to improve the standards for this board. No one tells us what’s good and what’s not. No matter if it’s easy planing, upwind performance, pop for jumps or smoothness or riding, only the sum of all these features will result in the perfect kiteboard for you. The new Spleene High Tech Line RIPs provide clear proof that you don’t need to waive anything to have a perfect kite day.
The Design Features:
The Spleene Door High Teck Lightwind Kiteboards shape detail is a double concave channel at the bottom of the boards. This allows for cleaner and earlier planing. When compared to a conventional double concave this underwater hull has got a parabolic cross section, specially designed by Spleene to provide significantly more grip due to the longitudinal guide of the sideways channel rails, even in choppy water. A development you can expect from Spleene. Only consistent development turns this concept into a Spleene High Tech Door. Compared to the previous models the new Door is now equipped with the Advanced Jet Bottom.
The Spleene Door Kiteboard stands for a unit of design and technology, which can only be provided by the original Door. As the inventor of the Door we have got this unique head start, which can be noticed immediately, in any condition, by any kiteboarder. The 2013 Spleene Door Kiteboards sporty overall impression coupled with a high level of comfort result in this special riding experience. Upwind and low-end abilities have set standards in kiteboarding within the last 10 years. Its concave outline, large surface and flat rocker line are responsible for this performance. However, these features alone are not sufficient by far to create a kiteboard that meets your and our demands.
The Design Features:
How do you define a radical kiteboard? By combining apparent contradictions. More performance with more control. More stability with less weight. As a result Spleene rs-boards always provide the maximum output. This applies not only to the board. Also you as a rider will show a significantly improved performance. However, the rs is not only about performance. It’s also about how easy it can be called up and controlled. The result will convince you.
Spleen RS-Line Board Features
Full Info on Spleen RS-Line Board Technology
Spleen RS-Line Board Sizes
32 x 40cm / 135 x 41cm / 138 x 42.5cm
Spleen RS-Line Board Includes
After a successful introductory year the 2010 Ocean Rodeo Go-Joe is promising to be everything we ever needed. Stronger, better, lighter, and easier to use. A great idea and an innovative product that is moving from beginners to wave riders and mainstream users. If you don't have one it's worth to check it out.
Traditional surfboard style leashes used to connect kiters with their boards have proven to be dangerous in both the water and on land. The GO – Joe™ is a new “leash free” tool to assist in the retrieval of your kiteboard without fear of being impacted or impeded by a leashed board. The GO – Joe™ is perfect for beginners and intermediates learning board recovery techniques. Advanced riders will appreciate the faster board recovery in extreme conditions or while learning new tricks.
What is it?
The GO – Joe™ is an inflatable tube structure attached to deck of the kiteboard that uses the natural forces of buoyancy distribution and wind to roll you kite board right side up and accelerate it down wind. These features combined with high visibility and additional floatation will make the use of surfboard style leashes in kiteboarding obsolete.
1. The unique hour glass design of the inflatable tube structure places the self righting buoyancy at a high pivot point. This distribution of flotation will power roll your board right side up if it lands foot straps down in the water, (foot straps down create drag, slowing the boards drift)
2. With the board right side up and foot strap resistance eliminated, the GO – Joe™ is positioned on the board forward of center allowing the wind to turn and sail the GO – Joe ™ down wind towards the rider. If the rider maintains their position with the kite at the zenith the board will simply sail downwind towards you.
3. The hour glass shaped design of the GO – Joe™ fits comfortably between the riders feet and does not restrict mobility. The hour glass shape also eliminates drag caused by spray from the boards rails
4. The GO – Joe™ is very light and durable using our proven manufacturing techniques.
Construction and durability:
1. The inflatable tubes are manufactured with the same techniques and materials used on our kite tubes. 110 micron PU inner bladder with HD Nylon outer cover. Bomber!
2. Deck mounting plate uses the same construction as our foot pad deck plates.
How to install the GO – Joe™
1. Simply screw the GO – Joe™ into the grab handle inserts found on any board. Pump-up the GO – Joe™ tube, and you are ready to ride! Deflate the GO Joe™ for easy storage and transport.
2. One size fits all; available in high visibility orange and yellow.
View more on the 2009 Ocean Rodeo Go Joe
The Litewave Wing Kiteboard has evolved into the ultimate light wind machine! Riding in ultra light wind has never easier, even for the big guys. The Litewave Wing Kiteboard tip-to-tip radical concave smooths out chop and makes for a very positive carving feeling. The Litewave Wing Kiteboard tips are very thin and flexy with built-in torsion bars to maximize carving performance under load. This board is truly a "session saver".
The Litewave Wing Kiteboard features wide tips and unique outline known as 'parabolic sidecut' enable planing and rocket you upwind. The wider tips give an unbelievable "load and pop" even in light condition. This 2013 Litewave Wing Kiteboard feels like snowboarding in bottomless powder. Our quality wood core and composite construction enhance riding properties as well as ensuring that your board will last for years to come.
Litewave Wing Kiteboard Features
Litewave Wing Kiteboard Sizes
146x45 - 153x45 - 161x45
Over a year of R&D in Mauritius, California, and Florida led Litewave to develop Quad Surf wave board. It is designed for the waves. A pulled in bat-tail outline and a faster-gun style rocker allows this board to really drive through and keep speed in the bottom turns, while the quad-fin configuration gives incredible grip for snappy off-the-lips.
The quad fin also makes for a wave board with limitless top end speed yet very snappy and responsive feel unlike other thruster configurations which are slower.
The Quad Surf has been built to really withstand the abuse that a kite rider will give it. Machined EPS core is wrapped with wood-veneer/glass/epoxy composite laminate to provide impact resistance and the optimum strength-to-weight ratio.
View Litewave Designs website
The Flysurfer Radical4 Kiteboard lives up to its name. Even sportier than its predecessor, the Flysurfer Radical4 Kiteboard is available on the market in four sizes. The Flyboards-Development team surrounding Andreas Hanrieder and Eddy Lansink did an excellent job, optimizing the Flysurfer Radical4 Kiteboard in practically all regards. The first priority was the switch in production center from Asia to Europe, which led to a higher quality of workmanship. Once this was implemented, a stronger differentiation of the range could be undertaken, whereby each board was tuned individually to riding weight and range of use.
Flysurfer Radical4 Kiteboard New Changes
1. New combination of wood-foam core
2. Torsion Fibre Layers
3. Heelside Channel
4. Tucked-under Edge
The additional Grabrails are absolutely soft, but still offer the best control for board-offs or one-footers. Thus, holding the board has become much easier. The Grabrails can easily be glued to the deck.
6. Straps & Pad
The new straps have a simple and quickly-adjustable Lace-System, previously proven with the wakeboard bindings. The enormous adjustment range provides a range of use from shoe size 38 (barefoot) to shoe size 48 (with neoprene boots).
Flysurfer Radical4 Kiteboard Features
|All Radical4s have a hybrid core, aimed at achieving a maximum harmony of board weight, performance and durability. A foam core comes into use on the toe side in the longtitudinal direction, providing a significant reduction in weight. On the side with more load, the heel side, a robust wood core is used, guaranteeing break stability and the dynamic recovery force of the board.|
|The innovative assembly of a unidirectional woven layer lengthwise and an additional woven layer (torsion layer) at a 45-degree-angle achieves considerably higher torsion stiffness, which is reflected in the increased jump performance with nevertheless good comfort.|
|The deep Heelside Channel provides good grip and makes it possible to set the edge more effectively for jumping.|
|The „Tucked-Under“ Edge has been cut off at a 45-degree-angle, as surfboards have been manufactured traditionally. This makes the board well-controllable, even in choppy conditions.|
|The additional Grabrails are absolutely soft, but still offer the best control for board-offs or one-footers. Thus, holding the board has become much easier. The Grabrails can easily be glued to the deck.|
|All of our boards have a special high-quality UV- and scratch-resistant coating, and thus offer a long product life. The design is protected under the coating, so that it does not get damaged if the board is slightly scratched.|
|The asymmetrical rounder and shorter toeside outline increases control when riding toeside and provides increased comfort.|
|Wider Insert Positions make it easier to land. There are three different stance options possible - Small (50.4 cm), Normal (56.2 cm) and Wide (61.2 cm).|
Flysurfer Radical4 Kiteboard Technical Data
|Stance width (cm)||50.4 - 56.2 - 61.2
||50.4 - 56.2 - 61.2||50.4 - 56.2 - 61.2||50.4 - 56.2 - 61.2|
|Core Material||Wood-Foam Core||Wood-Foam Core||Wood-Foam Core||Wood-Foam Core|
|Fins||4x 5cm G10||4x 5cm G10||4x 5cm G10||4x 5cm G10|
Flysurfer Radical4 Kiteboard Sizes
126.5 x 36 ~ 134 x 40 ~ 138 x 42 ~ 144 x 46
If you seek nirvana riding powered-up in the waves, the Flysurfer FlyWave Kiteboard offers the perfect combination of agility, control, durability and performance. There is no need for jibing on the Flysurfer FlyWave Kiteboard. Powerful landings are no problem, because of its full woodcore. The Flysurfer FlyWave Kiteboard ’Flip Nose’ on both ends eliminates spray and effectively prevents catching water. The Flysurfer FlyWave Kiteboard got lighter and more comfortable, due to an optimized ‘flex under load’ pattern, a softer footpad and comes equipped with new easy adjustable surf-footstraps. The Flysurfer FlyWave Kiteboard is designed in association with Dutch wave-guru Ruud Overwater, who has put over 6 years of wave riding experience into this board. The Flysurfer FlyWave Kiteboard is an easy to use mutant style board for the rider who wants to ride the waves powered with a board that has a surfy feel.
Flysurfer FlyWave Kiteboard Features
Flysurfer FlyWave Kiteboard Technical Data
|Stance width (cm)||38,5 - 41,5|
|Core Material||Full Wood Core|
|Fins||3x 6cm + 2x 4,5cm G10|
Flysurfer FlyWave Kiteboard Size
145 x 39
The all new Flysurfer FlySplit combines the opportunity to dissemble the board in the middle with the performance of a normal kiteboard. This is the crucial feature that wins extra space when traveling, whilst maintaining that the kiteboard performs just as well as a Radical or Flydoor. Innovation has always been one of Flysurfer’s highest aspirations when it comes to product development. This self-set aim motivates the development team surrounding Andi Hanrieder every day to create new ideas. One of these truly innovative products is the new boardline, FlySplit.
2014 Flysurfer FlySplit Highlights
Save when traveling - Especially helpful in these times of ever increasing excess baggage fees, charged by airlines on route to your favorite kite destinations, the FlySplit gives you the opportunity to dissemble your kiteboard easily and quickly so that it fits into your travel-bag. This innovation ensures that you won’t ever have to wait the extra minutes -or hours- at the beginning and end of your journey with check in and collection of your sporting luggage. The benefits are not exclusive to air-travel, when reaching your kite spot in a smaller car, or even in a sports car, the FlySplit offers you great flexibility. You might also take the chance to give your friend a lift to the spot, something which would otherwise be near impossible.
Precise manufacture of a high quality construction - To meet the high demands on this product, we’ve invested three years of intense testing and developing the FlySplit to create a kiteboard which is more than just a separable kiteboard. Thanks to our manufacturing in Europe we can guarantee that the FlySplits are produced with the best resources. By using only the best material, we achieve riding characteristics which combine both comfort and high performance. The splitting construction is impressively simple. The zigzag construction joins easily together and needs only to be fixed with a metal splint on both sides. In the centre and the edges of the board we use a full-wood-core to ensure great durability and dynamic performance. For the less stressed areas like the tips we use a light-foam-construction to save unnecessary weight. Due to this construction the FlySplits offers great performance but also a great deal of comfort in choppy and gusty conditions.
One system – two sizes - The FlySplit M in size 134cm x 41cm is made for those riders who love the high performance of the Radical. With the FlySplit M you do not have to miss out on neither an extreme pop for hooked or unhooked jumps nor fantastic up-wind performance. The FlySplit L is available in 160cm x 44cm. Heavier riders and kiters who do not want to miss out in light winds will love this board. The FlySplit L has a centre fin on the heel-side to increase the maximum up-wind performance. The innovative FlySplit M and FlySplit L have very low board weights, coming in at 2.55 kilograms and 3.15 kilograms respectively. This makes traveling even more fun.
Summary - The FlySplits are great allrounders, which should not be left out on any travel, whether with plane, sports car or motorcycle. Due to the fantastic opportunity of splitting the boards in half, the FlySplits are a proper alternative to normal boards on the kitesurfing market. Thanks to a three year development phase, we can guarantee that the FlySplits perform like excellent kiteboards, but are still seperable. Thus there is no compromise on quality and performance.
2014 Flysurfer FlySplit Features
The Split-System makes the FlySplits to the first separable kiteboards that do not compromise in performance.
It only takes a few seconds to easily and quickly assemble a FlySplit. Through the zigzag construction both board parts join and are fixed by two metal splints. From the car onto the water in only a in a twinkling
No more checking in sports luggage and paying extra fees when you travel. The FlySplit M fits in your normal travel bag (common bag size: 75x52x31cm). For the FlySplit „L“ please compare the pack size of the board with the internal dimensions of your suit case prior to your flight.
With their low weight of 2.55kg and 3.15kg for the FlySplit M and FlySplit L respectively, the FlySplits belong to the lightest kiteboards on the market. No extra luggage and better riding characteristics guaranteed.
All FlySplits have a hybrid core, aimed at achieving a maximum harmony of board weight, performance and durability. A foam core comes into use on the toe side in the longitudinal direction, providing a significant reduction in weight. On the side with more load, the heel side, a robust wood core is used, guaranteeing breaking stability and the dynamic recovery force of the board.
The innovative assembly of a unidirectional woven layer lengthwise and an additional woven layer (torsion layer) at a 45-degree-angle achieves considerably higher torsion stiffness, which is reflected in increased jumping performance with nevertheless good comfort.
All of our boards have a special high-quality UV and scratch-resistant coating, and thus offer a long product life. The graphic design is protected under the coating, so that it does not get damaged if the board is slightly scratched.
The „Tucked-Under“ Edge has been cut off at a 45 degree-angle, as surfboards have been manufactured traditionally. This makes the board very controllable, even in choppy conditions and reduces spray.
Wider insert positions make it easier to land. There are three different stance options possible - Small (50.4 cm), Normal (56.2 cm) and Wide (61.2 cm).
The FlySplit L has a 8cm long centre-fin on the heel-side. The centre fin increases the upwind performance especially in lightwind.
The asymmetrical rounder and shorter toe-side outline increases control when riding toe-side and provides increased maneuverability while carving.
Thanks to our manufacturing process within Europe we can guarantee highest quality and the usage of only the best materials.
2014 Flysurfer FlySplit Technicial
2014 Flysurfer FlySplit Comes with Images